Harley-Davidson DETACHABLE SISSY BAR SIDE STRAPS INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 20-04-2012

download
1. Remove factory sissy bar upright. Save upright if to be reused. Remove the two factory buttonhead screws and washers from the fender support on each side. Remove factory side plates. Discard side plates and factory hardware. 2. Cement the Plastic Sliders (item #1) into the brackets on the Khrome Werks Side Straps (item #2), using contact glue. 3. Install the special buttonhead screws through the flanged spacers (items #7, 8), then through the fender supports, frame, and into the fender. 4. Assemble the Knurled Knob (item #6) to the Side Strap, using the 1⁄ 4 “-20 x 1⁄ 2 ” screw, chrome washer and compression spring (items #3, 4, 5). The spring goes under the washer and into the counterbore of the knurled knob. 5. Install your sissy bar upright into the Side Straps, using the 1 ⁄ 4 “-28 x 3⁄ 4 ” screws provided (item #9).