Honda CB100 engine INTRODUCTION

0

Filed Under (Honda) by admin on 13-11-2011

download
Fuel Injection System for One Cylinder Motor Cycle Engine. Fuel injection has been developed for many years. But its common application is limited on car’s engine. With many reason fuel injection systems in motorcycle one cylinder engine has not been widely used yet. Fuel Injection System allows the amount of fuel, injected to be controlled appropriate to engine parameters such as engine speed, amount of air inducted to cylinder, temperature, for each cycle, over the entire engine operating conditions. This fuel injection research is done to find out the Volumetric Efficiency of the intake manifold system, the amount of fuel need to be injected for each engine cycle, and the engine characteristics over variation of test conditions. This research based on Honda CB100 engine, at applied thermodynamic Laboratory of Mechanical Engineering Department, Faculty of Engineering University of Indonesia. Experiment data from this
research shows the characteristics of injector duration as functions of engine speed, intake pressure, on one cylinder engine and the results of this research shows a good Volumetric Efficiency of the intake manifold designed using CFD (Computational Fluid Dynamic)

2009 TOYOTA RAV4 DEBUTS NEW FUEL EFFICIENT FOUR CYLINDER ENGINE AND ADDS NEW SAFETY

0

Filed Under (Toyota Manuals) by admin on 01-10-2011

download
Toyota has restyled its popular RAV4 compact sport utility vehicle for 2009. The new standard 2.5-liter four-cylinder engine is more powerful than the previous 2.4-liter engine and is more fuel efficient. In addition, all RAV4 models feature interior upgrades and a comprehensive new Sport Appearance Package is available for the 4WD V6 model. All RAV4 models receive enhanced safety and security features with standard front seat active headrests and an engine immobilizer. Comfort, convenience and user technology are also significantly enhanced in 2009 RAV4 models. The Limited grade adds a new standard Smart Entry system that allows the driver to open the vehicle by simply carrying the key fob and grasping the door handle. The Sport and Limited grades offer an available new rear backup monitor. Integrated satellite radio is newly available for 2009, and the Sport and Limited grades offer a new low-cost navigation system. All RAV4 models gain new standard seat fabric, and the Sport grade exclusively offers a new, unique Charcoal leather option.

Incoming search terms:

1997-2001 Toyota Camry, Avalon, Solara, Lexus ES300 Repair & Service Manual

0

Filed Under (Toyota Manuals) by admin on 13-06-2011

Introduction: Vehicle identification numbers; Buying parts; Maintenance techniques, and more.
* Tune-up and routine maintenance
* Four-cylinder engine
* V6 engine
* Engine and overhaul procedures
* Cooling, heating and air-conditioning systems

Toyota Camry 2006 clean engine

0

Filed Under (Toyota Manuals) by admin on 01-06-2011

Download
Why clean the throttle body on your Toyota? The Toyota 4 cylinder engine is one of the best in the world, but it has one weak spot. The design of the P.C.V. system is such that blow-by gases get into the throttle body and butterfly area. Over time, after 30,000 miles or more, the build-up of crud caused by this can cause your engine to run wrong. Many people wind up taking their car to the shop and spending lots of money to fix a rough-running, hard-starting engine when all they need is some rags, a screwdriver, and $5 for a can of throttle body cleaner (or a little more for a can of Seafoam) and 20 minutes worth of time to clean inside their throttle body. This article tells you how

Toyota Camry, 1992-1996 Avalon Repair & Service Manual

0

Filed Under (Toyota Manuals) by admin on 25-05-2011

epair manual covers all Toyota Camry 1992-1996, and Toyota Avalon models, 1995-1996.

Table of Contents

* Introduction: Vehicle identification numbers. Buying parts. Safety. Maintenance techniques. Chemical and lubricants, and more.
* Tune-up and routine maintenance
* Four-cylinder engine
* V6 engines
* General engine overhaul procedures
* Cooling, heating and air-conditioning systems
* Fuel and exhaust systems
* Engine electrical systems
* Emissions control systems
* Transmission

Incoming search terms:

HARLEY DAVIDSON MID-FRAME AIR DEFLECTORS INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 04-02-2011

download
INSTALLATION Model Years 2001-2007 1. Refer to Owner’s Manual and remove seat. 2. Remove stock plastic cruise control cable clip from frame near end of fuel tank if equipped. 2 1 is04321a 1. Mounting Strap Assembly 2. Speed Nuts Figure 1. Install Speed Nuts to Mounting Strap 1 is04324a 1. Mounting Strap Assembly Figure 2. Mounting Strap Location – View of Frame from Above with Seat Removed 1 3 2 4 5 6 is04546a 1.3/4 in. long button head screw and 1 in. OD flat washer 2.7/8 in. long button head screw, P-clamp and 1 in. OD flat washer 3. Well nut, 3/4 in. long button head screw and 3/4 in. OD flat washer 4. U-clip 5. Right side deflector 6. Left side deflector Figure 3. Fastener Locations – View of Frame Rearward of Rear Cylinder, Engine Removed for Clarity 3. See Figure 1. Assemble speed nuts (2) to both ends of mounting strap (1) and align edges of nuts to angled ends of strap. -J04399 4. See Figure 2. Install mounting strap assembly (1) through window of frame. Position strap so speed nuts are aligned over the 1/4 inch diameter holes in frame as shown. 5. See Figure 3. Attach strap assembly to frame using a 3/4 inch length button head screw (1) and the 7/8 inch length button head screw (2) by inserting them from the underside of frame plate. Tighten screws enough to keep strap from moving and prevent it from shifting position during deflector installation. 6. Insert well nut (3) into underside of frame plate. Apply liquid soap to the outer surface of the well nut to ease installation. 7. Remove 3/4 inch screw (1), then position right side deflector as shown and secure with the 3/4 inch screw and 1 inch washer. Do not tighten. 8. Install screw and small washer (3). Do not tighten. 9. Firmly push the deflector against the outer side of frame and tighten screws to 25-35 in-lbs (2.8-3.9 Nm) . 10. Remove left side mounting strap screw (2). 11. Install cable clamp (Figure 5, Item 9) to cruise control cable (if equipped). 12. See Figure 3. Insert screw through cable clamp (if necessary), washer (2) and left side deflector (6) and install to mounting strap speed nut. Firmly push deflector against outside of rail and tighten screw to 25-35 in-lbs (2.8-3.9 Nm) .