Toyota Avensis Equipment REMOVAL AND INSTALLATION

0

Filed Under (Toyota Manuals) by admin on 05-10-2011

Trip computer with fuel consumption &average speed display (where standard audio fitted) Outside temperature display Instrument display dimmer Digital odometer with two trip meters Digital Clock Dashboard integrated multi-information display (where standard audio fitted) Fuel Caplocation indicator Rearfoglamps indicator Sequential automatic transmission mode indicator (where sequential automatic fitted) Tachometer Fuel indicator with low fuel warning Water temperature indicator Engine temperature warning Engine management warning Lights Onwarning Door Ajarwarning



1995 HONDA VFR Owners Manual

0

Filed Under (Honda) by admin on 01-12-2010

download
INSTRUMENTS AND INDICATORS The indicators are contained in the instrument panel. Their functions are described in the tables on the following pages. USA model: Odometer and tripmeter read in miles. Canadian model: Odometer and tripmeter read in kilometers. (1) Speedometer (2) Odometer (3) Left turn signal indicator (4) Side stand indicator (5) High beam indicator (6) Digital clock (7) Tachometer (8) Tachometer red zone (9) Neutral indicator (10) Right turn signal indicator (11) Fuel indicator (12) Fuel gauge (13) Coolant temperature gauge (14) Low oil pressure indicator (15) Tripmeter (16) Tripmeter reset knob 15 (Ref.No.) Description Function ————————————————- ———————————————————– (1) Speedometer Shows riding speed. (2) Odometer Shows accumulated mileage. (3) Left turn signal indicator (Amber) Flashes when the left turn signal operates. (4) Side stand indicator Lights when the side stand is put down. Before parking, check that the side stand is fully down; the light only indicates the side stand ignition cut-off system (page 54) is activated. (5) High beam indicator (Blue) Lights when the headlight is on high beam. (6) Digital clock Shows the time (page 19). (7) Tachometer Shows engine RPM. (8) Tachometer red zone Shows excessive engine rpm range in which operation may damage the engine. (9) Neutral indicator (Green) Lights when the transmissions in neutral. (10) Right turn signal indicator

KYMCO MXU 500 SPECIFICATION AND OWNER'S MANUAL

0

Filed Under (Kymco) by admin on 12-11-2010

download
OFF ON (1) CONTROL FUNCTIONS 17 (1) Ignition switch (2) Key IGNITION SWITCH ON: Functions oft he respective switch positions areas follows: The key cannot be removed. Theenginecanbe started. OFF: “”: All electrical circuits are switched off except hazard light. The key can be removed in this position. All electrical circuits are switched on. The ignitions witch is ON while the position light and taillightwill light. All electrical circuits are switched on. Theenginecanbe started. The key cannot be removed. 18 INSTRUMENTS AND INDICATOR (1) Multi-function display (2) (3) (5) (6) Low-range indicator light”L” (7) High-range indicator light”H” (8) Neutral indicator light”N” (9) Reverse indicator light”N: (10) Park indicator light”P” (11) (12) Right turn signal indicator High beam indicator (4) Coolant temperature warning indicator Set button Mode button Left turn signal indicator (11) (2) (3) (4) (5) (8) (1) Multi-function display The display includes the following functions: Speedometer Odometer/Tripmeter Digital clock 2WD/4WDindicator Fuel gauge (2) Right turn signal indicator Flashes when the right turn signal operates. (3) High beam indicator The ignition switch is at the”"position, the high beam indicator will light when the headlight switch to select High beam () . Both left and right turn signal indicator will flash at the meantime when the hazard switch is operated and turn signal switch is turned off. NOTE: (12) (1) (7) (6) (9) (10) TRIP ODO mile kmPM 2WD 4WD SET MODE PRNHL
19 (4) Coolant temperature warning indicator When the coolant temperature reachesa specified level, this indicator comes onto warn that the coolant temperature is too hot. If the indicator comes on during operation, stopt he engine as soon as it is safe to do so and allow the engine to cooldown for about 10 minutes. (5) Set button This button is used to select ODO, TRIP A andT RIPB. This button is also used to adjust the time and reset the tripmeter. (6) Low-range indicator light”L” This indicator light comes on when the drive select lever is in the”L”position. (7) High-range indicator light”H” This indicator light comes on when the drive select lever is in the”H”position. (8) Neutral indicator light”N” This indicator light comes on when the drive select lever is in the”N”position

Incoming search terms:

Piaggio MP3 250ie 250cc specification

0

Filed Under (Piaggio) by admin on 11-11-2010

download
Capacity 250cc (EURO 3) Engine QUASAR 4 valve, 4 stroke single cylinder with electronic injection Cooling Liquid Electric Starter * Transmission Automatic Twist and Go Front Suspension Parallelogram, cantilever Rear Suspension Twin hydraulic shock absorbers with pre-load adjuster Front Brake Disc Double Ø240mm disc Rear Brake Disc Ø240mm disc Wheel Size 12″-12″ Running Weight 213 kg Lockable Glove Box * Underseat Storage Compartment * Digital Clock * Colours Available Sky Blue, Excalibur Silver, Black Graphite, Cherry Red