HARLEY DAVIDSON FLHTCUTG MUDFLAP KIT INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 28-03-2011

download
INSTALLATION 1. See Figure 1. Center drilling template on the rear fender. Adjust template to the bottom edge of the fender and tape template to fender. 2. Center punch the two template drilling locations. NOTE Use caution to prevent damage to the tire when drilling the attachment holes for the mudflaps. 3. Use a 5/16 inch bit to drill the template holes. 4. See Figure 2. Install the mudflap using one stud, washer and nut in each fastening hole. Tighten to 5-10 ft-lbs (6.8- 13.6 Nm) . 5. Repeat Steps 1-4 for the opposite fender.

HONDA GL 1500 FRONT FENDER EXTENSION INSTALLATION MANUAL

0

Filed Under (Honda) by admin on 27-02-2011

download
1. Remove items as shown using straight blade screwdriver. Pry off the two fork cover caps and with a 5mm allen wrench, unfasten the two bolts (Figure 1A). Remove fork cover. a. Pull outward and forward to remove left hand side covers. (Figure 1B) b. Using 8mm and 10mm wrenches, remove the three bolts from the left hand disc cover. Repeat for right side disc cover. (Note for re-installation; the top 10mm bolts (Figure 1C) do not have collars included.) c. Using the Phillips screwdriver, unfasten speedometer cable (figure 1D) d. Using the 8mm wrench, remove the left hand side fender bolts (figure 1E) e. Using the 8mm allen wrench, remove the four top bolts (figure 1F) from the fork stay bracket, and remove bracket. 2. With the rear fender off the motorcycle, hold front fender extension in place and using center punch and hammer, light tap the three drilling locations (figure A). Set the fender extension aside and drill three ΒΌ inch holes at marked locations (figure B). 3. Attach fender extension to fender with hardware provided (figure 3). 4. Re-install all items previously removed in step 1.