HARLEY DAVIDSON DYNA VOLTAGE REGULATOR KIT INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 10-04-2011

download
INSTALLATION 1. Remove and discard the original voltage regulator mounting screws. 2. See Figure 1. Place a chrome washer (4) onto each of the button head screws (5) from the kit. Insert the screws into the mounting holes in the new voltage regulator cover (1). Place first a spacer (2), then a Nylon washer (3) over the screw threads on the inside of the cover. 3. Fasten the cover through the voltage regulator into the motorcycle frame. Tighten to 60-80 in-lbs (6.8-9.0 Nm) . SERVICE PARTS 5 3 4 5 1 4 2 2 is01725 Figure 1. Voltage Regulator Cover Components Table 1. Service Parts: Voltage Regulator Cover Components Part Number Description (Quantity) Item Not Sold Separately Regulator cover 1 Not Sold Separately Spacer, 1.0 inch (25 mm) long (2) 2 62917-01 Washer, Nylon (2) 3 Not Sold Separately Washer, Chrome (2) 4 Not Sold Separately Screw, button head, hex socket 1/4-20 x 2-1/4 inch long (2