TOYOTA CA/ 50 STATE CERTIFIED EMISSION CONTROL UNDERHOOD LABEL ORDERING

0

Filed Under (Toyota Manuals) by admin on 29-10-2011

download
have included tables reflecting 1997 – 2000 MY CA and 50 State Emission Label part number information for your convenience. Please continue to consult the Electronic Parts Catalog (EPC) or the parts microfiche for information regarding other model years as well as Federal Emission label part numbers. NOTE: Although the California Smog Impact Fee has been discontinued, dealers are still required by regulation to verify the correct emission label is installed on the correct vehicle. REGULATIONS: The United States Clean Air Act, Title II, Sections 202, 203, 205, and 207 mandates that the emission control label must correctly match the emissions equipment on the vehicle. Any person violating this requirement is subject to applicable State penalties and a Federal civil penalty of no more than $25,000 for each instance. Personnel at franchised dealerships are authorized to affix such labels to vehicles and are, therefore, subject to this regulation and the attendant penalties. Do not sell the labels over the counter. Always install the label on the vehicle. Never install a California and/or 50 State Label on a vehicle that is not a California/50 State Emission Certified Vehicle. Do not install Federal Emission labels on vehicles that are not Federal Emissions Certified

Incoming search terms:

Suzuki motorcycles VL800 procedures for its inspection/ service and overhaul of its main components

0

Filed Under (Suzuki) by admin on 12-11-2010

download
GENERAL INFORMATION PERIODIC MAINTENANCE ENGINE SHAFT DRIVE FUEL AND LUBRICATION SYSTEM COOLING SYSTEM CHASSIS ELECTRICAL SYSTEM SERVICING INFORMATION EMISSION CONTROL INFORMATION VL800K2 (’02-MODEL) FUEL, OIL AND ENGINE COOLANT RECOMMENDATION FUEL (For USA and CANADA) 1.Use only unleaded gasoline of at least 87 pump octane ( ) method or 91 octane or higher rated by the Research Method. 2.Suzuki recommends that customers use alcohol-free unleaded gasoline whenever possible. 3.Use of blended gasoline containing MTBE (Methyl Tertiary Butyl Ether) is permitted. 4.Use of blended gasoline/alcohol fuel is permitted, provided that the fuel contains not more than 10% ethanol. Gasoline/alcohol fuel may contain up to 5% methanol if appropriate cosolvents and corrosion inhibitors are present in it. 5.If the performance of the vehicle is unsatisfactory while using blended gasoline/alcohol fuel, you should switch to alcohol-free unleaded gasoline. 6.Failure to follow these guidelines could possibly void applicable warranty coverage. Check with your fuel supplier to make sure that the fuel you intend to use meets the requirements listed above

Incoming search terms: