2001 – 2004 Camry, Highlander, Solara & 2004

0

Filed Under (Toyota Manuals) by admin on 12-10-2011

download
2004 model year Camry, Highlander, Solara and 2004 model year RAV4 vehicles with the 2AZ-FE engine may exhibit squealing and/or rattling noises coming from the engine compartment during vehicle operation especially after a cold soak. The belt tensioner assembly has been improved to correct this condition. 2001 – 2004 model year Camry, Highlander and Solara vehicles equipped with 2AZ-FE engines produced BEFORE the Production Change Effective VINs shown below. 2004 model year RAV4 vehicles produced BEFORE the Production Change Effective VINs shown below. MODEL ENGINE LINE PRODUCTION CHANGE EFFECTIVE VIN TMMK Line 1 4T1BE3#K#4U358206 Camry TMMK Line 2 4T1BE3#K#4U914052 y 2AZFE Tsutsumi JTDBE3#K#40296732 Highlander 2AZ-FE TMK JTE#D2#A#40100501 Solara TMMK 4T1CE3#P#4U914074 RAV4 Tahara JTE#D2#V#40029797 PREVIOUS PART NUMBERCURRENT PART NUMBER PART NAME QTY 16620-28010 16620-28011 Tensioner Assembly, V-ribbed Belt 1 OP CODE DESCRIPTION TIME OFP T1 T2 EG8001 R & R Accessory Belt Tensioner 0.9 16620-28010 91 55 Applicable Warranty*: This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle’s in-service date. *Warranty application is limited to correction of a problem based upon a customer’s specific complaint

Incoming search terms:

2001 – '2005 Highlander (V6) FUEL INJECTOR TICKING NOISE

0

Filed Under (Toyota Manuals) by admin on 08-10-2011

download
Do NOT smoke or work near an open flame when working on the fuel system. Keep gasoline away from rubber or leather parts. Wear safety goggles while working with the fuel system under pressure. Do NOT disconnect any part of the fuel system until you have discharged the fuel system pressure. Even after discharging the fuel pressure, place a shop rag over fittings as you separate them to reduce risk of fuel spray on yourself or in the engine compartment. 1. Discharge fuel system pressure. A. Remove Circuit Opening Relay from Relay Block No. 1 located to the left of the Instrument Panel Junction Block behind the left lower finish panel If the connector and pipe are stuck, pinch the fuel pipe, push and pull the connector by hand to disconnect them. Do not use any tools. E. Drain the fuel that remains inside Fuel Pipe Sub-assembly No. 1. F. Place a tray under the vehicle or point of disconnection, if needed, to catch any fuel that may spill. G. Protect the disconnected fuel lines from debris by covering with a vinyl or plastic bag. H. Remove the original pulsation damper from the rear fuel rail. I. Remove and discard the remaining bolt holding Fuel Pipe Sub-assembly No. 1 to the front fuel rail

Installation Instructions for TRD’s 3.4-liter V6 Supercharger Kit 1997-2000 Tacoma,1997-1998 T-100, 1996-2000 4Runner

0

Filed Under (Toyota Manuals) by admin on 28-05-2011

Download

begin, TRD recommends you thoroughly Before you and engine compartment.thatyou don’t, grease clean the engine
If buildup  on parts could become dislodged during the procedure and fall into the engine.
• Make sure the engine has cooled fully before you begin. suggest you draw diagrams of your
• To help you later, we you disconnect anything. You can doengine’s cable routing before the same

for the vacuum hoses; however, some of the vacuum connections on your stock manifold may not be the same as those on the supercharger. To ensure the proper hose connections, refer to the diagrams in the back of this manual.
TRD supercharger has been designed to reuse most of • Thestock nuts and bolts.kitTherefore, as you remove them, keep the  them with their components or label them for location. This will assure a faster, easier installation.
B. Removal of Stock Intake Manifold (figure 1)
1. Disconnect the battery ground cable.
2. With tape or a permanent marker, mark the forward edge of the power steering and the air conditioning compressor drive belts (figure 2). This will ensure that the belts will be returned to their original positions and that they will rotate in the same direction. If you reverse the direction of rotation, it may cause the belts to fray.

Incoming search terms:

Toyota Yaris 2006 up models 5 speed and Automatic Instruction Manual

0

Filed Under (Toyota Manuals) by admin on 23-05-2011

Download
Using the ⑥ bolt (1) and #15 bracket spacer B (1), attach #5 alternator bracket as shown in illustration. Install the alternator upside down. Using the ⑧ head bolt (1) and washer (1), attach alternator to #5 Alternator Bracket.
6. Using ⑱ bolt (1) and ⑬ nut (1), attach the alternator on bottom alternator mount (lowest hole on Bracket A).
7. After installing alternator, make sure the A/C line does not interfere with belts. If it does, push the A/C line forward and make sure the alternator has enough clearance. ⑧Bolt Washer 8. Some models will have addition A/C lines near engine mount (not shown here). Please adjust A/C line to clear alternator pulley. Please find a suitable spot where the A/C line will not interfere with the pulleys and tie theline down with zip ties

KAWASAKI Jet Ski STX-12F SPECIFICATIONS

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
FEATURES & BENEFITS Kawasaki 2007 SPECIFICATIONS: JT1200D7F Engine type……………… 4-stroke, water cooled, 4- cylinder Displacement…………… 1,199 cm3 Bore & stroke…………… 83.0 x 55.4 mm Compression ratio…… 11.2:1 Induction system……… DOHC 16 valve (4 valves per cylinder) Maximum power………. 92 kW (125 PS) / 7,200 r/min Maximum torque……… 125 N·m / 6,500 r/min Cooling system……….. inducted water Fuel system…………….. EFI with single 54 mm throttle Starting ……………………. electric Battery…………………….. sealed, 12V 18Ah Propulsion system…… axial flow, single stage jet pump Maximum thrust………. 3,675 N (375 kgf) Seating capacity………. 3 seater Fuel capacity…………… 62 L L x W x H…………………. 3,120 x 1,180 x 1,050 mm Dry weight……………….. 334 kg Colours……………………. Red NOTE: Specifications subject to change without notice ENGINE Ñ Chrome composite plated cylinders are lightweight, durable and quickly carry heat away from the combustion chamber and piston for supreme durability at high power output. Ñ Semi-dry sump uses a single feed oil pump. Ñ Tip over protection shuts the engine off if the craft tilts more than 61o. Ñ 4-valves per cylinder provides maximum valve area for optimum flow. Fuel system Ñ Electronic Fuel Injection (EFI) with a single Mitsubishi throttle body and an injector at each intake port. Ñ Long intake tract enhances low-end power. Ñ Large capacity, low-noise airbox. Ñ Finger-type throttle reduces hand fatigue. Water-jacketed semi-dry exhaust Ñ Double-walled exhaust manifold and dual waterboxes help reduce noise. Ñ Water surrounding the exhaust system lowers engine compartment temperatures for more power. Ñ Semi-dry exhaust system keeps cooling water out of the exhaust before the waterbox to prevent water from entering the engine if the boat should capsize. Ñ Emissions meet US EPA 2006 and CARB 2008 regulations. Lanyard engine stop switch Ñ Engine will not crank with lanyard removed. Ñ Fastened to the rider, lanyard cuts the ignition if the rider dismounts. DRIVE SYSTEM Three-blade oval edge stainless steel impeller Ñ The shape of the blades give maximum efficiency with minimum cavitation. Ñ Fully enclosed impeller for damage protection. Ñ Stainless steel pump insert increases durability and helps ensure reliable performance. Ñ Tough stainless steel is used for incredible durability. HULL Ñ One-piece chopper over foam (COF) hull construction is lighter than a conventional hand-laid hull of similar size. Ñ Cab forward design makes more space for the rider and passengers. Ñ Gel coat for deep, lustrous, scratch resistant finish. Ñ Open rear deck for carrying bulky items, putting on skis, etc. Ñ
An automatically retractable boarding step makes boarding from deep water easy. Kawasaki Smart Steering (KSS) Ñ A steering sensor is linked to the EMM to aid in boat handling when the throttle is quickly released from high speed. Detail features Ñ 62 litre fuel tank for increased range. Ñ LCD instrumentation includes digital speedometer, tachometer, hour meter, clock, trip distance, trip time, fuel level and warning lamps. Ñ Includes high tech. troubleshooting function for the fuel injection system. A computer hook-up allows easy retrieval of entire troubleshooting history. Ñ A remote cooling system flushing point is included. Ñ Front hatch made of ABS for reduced weight, increased durability and enhanced appearance. Ñ Mirrors mounted on the deck reduce weight and enhance appearanced

Incoming search terms: