Harley-Davidson Electronic Fuel Injection Tuner INSTALLATION Manual

0

Filed Under (Harley Davidson) by admin on 14-04-2012

download
Harley-Davidson Electronic Sequential Port Fuel Injection System, (ESPFI) This completely new engine management system was released starting with select 2001 model year Softail motorcycles. This system is a speed/density, open loop, sequential port fuel injection design that also controls spark timing and spark intensity. Speed/Density System – When the ECM monitors manifold air pressure, air temperature, throttle position and engine rpm to manage fuel delivery. Open Loop Control – When the ECM monitors sensors positioned on the intake side of the engine and does not monitor the end result of internal combustion at the exhaust. Sequential Port Fuel Injection – When the injector nozzle is positioned in the manifold near the intake valve and is precisely timed to deliver fuel to each cylinder. This ESPFI system is the exclusive design used on 2001 and Later EFI-equipped Softail models, 2002 and Later EFI-equipped Touring models, 2004 and Later Dyna models, and 2004 and later V-Rod models. Current ESPFI Components The following is a list of the major components of Harley-Davidson’s current ESPFI system. It is important to have an understanding of what these components do before learning how the ESPFI system functions. Refer to the appropriate Harley-Davidson Service Manual for the vehicle you are working on for additional information on component design and function and for the physical location and testing procedures for each individual component. ECM – Electronic Control Module – this is the brain of the system that collects input signals from multiple sensors, makes decisions and sends output signals to deliver fuel and spark to the engine. CKP – Crank Position Sensor – this sensor provides input signals to the ECM that indicate engine rpm, (how fast the engine is running in R evolutions P er M inute). The ECM also uses these inputs to determine what stroke the engine is in so it can deliver the fuel and spark at the desired time.

APRILIA TUONO V4 R APRC Technical specifications

0

Filed Under (Aprilia) by admin on 16-11-2010

Engine type Aprilia longitudinal 65° V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder Fuel Unleaded petrol Bore and stroke 78 x 52.3 mm Total engine apacity 999.6 cc Compression ratio 13:1 Maximum power at crankshaft 162 hp (119 kW) at 11,000 rpm Maximum torque at crankshaft 110 Nm at 9,000 rpm Fuel system Airbox with front dynamic air intakes. 4 Weber-Marelli 48-mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road) Ignition Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark lug per cylinder and “stick-coil” type coils Starting Electric Exhaust system 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine management system controlled butterfly valve and integrated trivalent catalytic converter (already meets future Euro4 regulations) Alternator Flywheel mounted 420W alternator with rare earth magnets Lubrication Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling) Gearbox 6-speed cassette type gearbox 1st: 39/15 (2.600) 2nd: 33/16 (2.063) 3rd: 34/20 (1.700) 4th: 32/22 (1,455) 5th: 34/26 (1,308) 6th: 33/27 (1,222) Gear lever with Aprilia Quick Shift electronic system (AQS)
Clutch Multiplate wet clutch with mechanical slipper system rimary drive Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659) Secondary drive Chain: Drive ratio: 42/16 (2.625) Traction anagement APRC System (Aprilia Performance Ride Control), which includes Traction Control (ATC), Wheelie Control (AWC), Launch Control (ALC), all of which can be configured and deactivated independently. Frame Aluminium dual beam chassis with pressed and cast sheet elements. Sachs steering damper. Front suspension Sachs upside down front fork with Æ 43 mm stanchions. Low profile forged aluminium calliper mountings for radial callipers. Completely adjustable spring preload and hydraulic compression and rebound damping. Wheel travel: 120 mm

APRILIA SMV 750 DORSODURO Technical Specifications

0

Filed Under (Aprilia) by admin on 07-11-2010

download
Engine Aprilia V90 four stroke longitudinal 90° V twin. Liquid cooling. Double overhead camshaft with mixed gear/chain drive; four valves per cylinder. Fuel Unleaded petrol. Bore x stroke 92 x 56.4 mm. Total displacement 749.9 cc. Compression ratio 11 : 1. Maximum power at the crank 67.3 kW (92 HP) at 8750 rpm. Maximum torque at the crank 8.4 kgm (82 Nm) at 4500 rpm. Fuel system Integrated engine management system. Electronic fuel injection with ride-by-wire electronic throttle control. Ignition Digital electronic, integrated in the fuel injection system. Starting Electric. Exhaust Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe. Alternator 450 W at 6000 rpm. Lubrication Wet sump. Gearbox Six speed. Transmission ratios: 1 st 14/36 (2.57) 2 nd 17/32 (1.88) 3 rd 20/30 (1.5) 4 th 22/28 (1.27) 5 th 23/26 (1.13) 6 th 24/25 (1.04) Clutch Hydraulically operated multi-plate wet clutch. Primary drive Spur gears. Transmission ratio 38/71 (1.87). Final drive Chain. Transmission ratio 16/46. Frame Modular steel trellis secured to aluminium side plates by high strength bolts. Detachable rear frame. Front suspension 43 mm upside-down fork. 160 mm wheel travel. Rear suspension Aluminium alloy swingarm. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 160 mm. Brakes Front: Double stainless steel floating disc (Ø 320 mm) . Four- piston radial calipers. Metal braided brake line. Rear: Stainless steel disc (∅ 240 mm) with single piston caliper. Metal braided brake line. Wheels Aluminium alloy. Front: 3.50 x 17″. Rear: 6.00 x 17″. Tyres Radial tubeless. Front: 120/70 ZR 17. Rear: 180/55 ZR 17. Dimensions Overall length: 2216 mm Overall width: 905 mm (at handlebars) Overall height: 1185 mm (at instruments) Seat height: 870 mm Wheelbase: 1505 mm Trail: 108 mm Rake angle: 26° Weight: 186 kg Tank capacity 12 litres (autonomy > 200 km)

APRILIA SL 750 SHIVER Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Aprilia V90 Four stroke longitudinal 90° V twin. Liquid cooling. Double overhead camshaft with mixed gear/chain drive; four valves per cylinder. Fuel Unleaded petrol. Bore x stroke 92 x 56.4 mm Total displacement 749.9 cc Compression ratio 11 : 1 Maximum power at the crank 95 HP at 9000 rpm. Maximum torque at the crank 8.25 kgm at 7000 rpm. Fuel system Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies Ignition Digital electronic, integrated with the injection, two spark plugs per cylinder Starting Electric Exhaust Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe Generator 450 W at 6000 rpm. Lubrication Wet sump Gearbox six speed, transmission ratio: 1° 36/14 (2.57) 2° 32/17 (1.88) 3° 30/20 (1.5) 4° 28/22 (1.27) 5° 23/26 (0.88) 6° 24/25 (0.96) Clutch Multi-plate in oil bath, cable operated. Primary drive Spur gears, transmission ratio: 60/31 (1.75) Final drive Chain Transmission ratio: 16/44 Frame Dismountable steel trellis connected with high strength bolts to aluminium side plates. Dismountable rear frame. Front suspension 43 mm upside-down fork. 120 mm wheel travel Rear suspension Aluminium alloy swingarm with reinforcement truss. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm. Brakes Front: Double stainless steel floating disc (Ø 320 mm ). Four piston radial calipers. Metal braided brake line. Rear: Steel disk (∅ 245 mm) with twin piston caliper. Metal braided brake line. Wheels In aluminium alloy Front: 3.50 X 17″ Rear: 6.00 X 17″ Tyres Radial tubeless; front: 120/70 ZR 17 rear: 180/55 ZR 17 Dimensions Overall length 2066 mm Overall width: 815 mm (at handlebars) Overall height: 1132 mm Seat height: 810 mm Wheelbase: 1449 mm Trail: 109 mm Rake angle: 25.7° Dry weight 189 kg Tank capacity 15 lt

Aprilia Mana 850 Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine: Aprilia 90° longitudinal V twin four stroke. Liquid cooled. Single overhead cam with chain drive, four valves per cylinder Fuel: Unleaded petrol Bore x Stroke: 88 x 69 mm Total displacement: 839,3 cc Compression ratio: 10:1 Maximum power at the crank: 56 kW (76.1 HP) at 8,000 rpm Maximum torque at the crank: 7.45 kgm (73 Nm) at 5,000 rpm Fuel system: Integrated engine management system. Weber Marelli electronic fuel injection with one 38 mm throttle body Ignition: Digital electronic ignition, with two spark plugs per cylinder, integrated with fuel injection system Starting: Electric Exhaust: Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe Generator: 450 W at 6000 rpm Lubrification: Dry sump with separate oil reservoir Gear box: Sequential with manual or automatic mode selectable by the user. 7 ratios in manual mode. 3 mappings (Touring, Sport, Rain) in automatic mode. Gear change by pedal or handlebar control. The user can switch from automatic to sequential mode at any moment. Clutch: Automatic Primary drive: Belt Final drive: Chain Frame: High strength steel trellis Front suspension: 43 mm upside-down fork. Wheel travel: 120 mm. Rear suspension: Aluminium alloy single-piece swingarm. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 125 mm Brakes: Front: double stainless steel floating disc (Æ 320 mm). Radial calipers with four pistons Rear: stainless steel disc (Æ 260 mm). Single piston caliper Wheels: Aluminium alloy. Front: 3.50 x 17″ Rear: 6.00 x 17″ Tyres: Radial tubeless. Front: 120/70 ZR 17 Rear: 180/55 ZR 17 Dimensions: Overall length: 2080 mm Overall width: 800 mm (at handlebars) Overall height: 1130 mm Seat height: 800 mm Wheelbase: 1463 mm Trail: 103 mm Rake angle: 24° Fuel tank capacity: 16 litres Other: Colours, specifications and technical data may be subject to change without prior notice.

Aprilia PEGASO 650 Technical specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Single-cylinder four-stroke with light alloy cylinder. Liquid cooling with three way pressurised circuit. Single overhead cam with chain timing drive; four valves. Anti-vibration balancer shaft. Euro 3. Fuel Unleaded fuel. Bore and stroke 100 x 84 mm. Total displacement 660 cc. Compression ratio 10:1. Max. power at crankshaft 48 HP (35 kW) at 6,000 rpm. Max. torque at crankshaft 6.01 kgm ( 59 Nm) at 5,000 rpm. Fuel system Integrated electronic engine management system. Electronic fuel injection. 44 mm throttle body. Ignition Electronic. Starting Electric starter. Alternator 290 W Lubrication Dry sump with oil pump. Gearbox 5 speed. Transmission ratios: 1st 12/30 2 nd 16/26 3rd 20/23 4th 22/20 5th 26/20 Clutch Multi-plate in oil bath. Cable operated. Primary drive Spur gears. Transmission ratio: 36/75. Final drive Chain. Transmission ratio: 15/44. Frame Steel, open cradle, single spar frame. Front suspension 45 mm fork. Wheel travel 140 mm. Rear suspension High strength steel swingarm. Aprilia Progressive System (APS) rising rate linkages. Sachs hydraulic monoshock with adjustable rebound and preload. Wheel travel 130 mm. Brakes Front: stainless steel floating disc, ∅ 320 mm, four piston caliper. Rear: stainless steel disc, ∅ 240 mm, two piston caliper. Wheels Alloy wheels with twinned spokes. Front: 3.50 x 17″. Rear: 4.50 x 17″.

Aprilia Shiver 750 Sport Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Type Aprilia V90 four-stroke longitudinal 90° V-twin engine, liquid cooled, double overhead camshaft with mixed gear/chain timing system, four valves per cylinder. Capacity 749.9 cc Bore and stroke 92 x 56.4 mm Compression ratio 11 : 1 Maximum power at crank 95 HP at 9000 rpm. Max Torque at crank 8.25 kgm at 7000 rpm. Fuel supply Ignition Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies. Digital electronic, integrated with the injection. Exhaust system Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe. Clutch Multi-plate in oil bath. Hydraulically operated. Lubrication Wet sump Frame Modular tubular steel frame fastened to aluminium side plates by high strength bolts. Removable rear subframe. Front suspension 43 mm upside-down fork. 120 mm wheel travel. Rear suspension Aluminium alloy swingarm with swingarm stiffener brace. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm. Front brakes Wave stainless steel floating disc (Ø 320 mm). Four piston radial callipers. Metal braided brake line. Rear brake Wave Stainless steel disc (∅ 240 mm) with single piston calliper. Metal braided brake line. Wheels Aluminium alloy Front : 3.50 X 17″ Rear : 5.50 X 17″ Length 2265 mm Width 800 mm (at handlebars) Height Tank Capacity 1135 mm (at instruments) 15 Litres

APRILIA DORSODURO FACTORY 750 Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine type Aprilia V90 four-stroke longitudinal 90° V-twin engine, liquid cooled, double overhead camshafts with mixed gear/chain timing system, four valves per cylinder. Fuel Unleaded petrol Bore and stroke 92 x 56.4 mm Total engine capacity 749.9 cc Compression ratio 11: 1 Maximum power at crankshaft 67.3 kW (92 cv) at 8,750 rpm Maximum torque at crankshaft 8.4 kgm (82 Nm) at 4,500 rpm Fuel system Integrated engine management system. Injection with Ride by Wire throttle opening management and triple mapping Ignition Digital electronic ignition integrated with injection system. Starting Electric Exhaust system 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and lambda probe Alternator 450 W at 6,000 rpm Lubrication Wet sump Gearbox 6 speeds, drive ratio: 1st 14/36 (2.57) 2nd 17/32 (1.88) 3rd 20/30 (1.5) 4th 22/28 (1.27) 5th 23/26 (1.13) 6th 24/25 (1.04) Clutch Multiple discs in oil bath, hydraulically operated Primary drive Straight cut gears, drive ratio: 38/71 (1.87) Secondary drive Chain. Drive ratio: 16/46 Chassis Modular tubular steel frame fastened to aluminium side plates with by high strength bolts. Removable rear subframe. Front suspension Multi-adjustable Sachs upside-down fork with Ø 43 mm diam. stanchions. Wheel travel 160 mm. Rear suspension Aluminium alloy swingarm Gas-operated shock absorber with piggy back with adjustable spring preload and compression and rebound damping. Wheel travel 160 mm. Brakes Front: Dual Ø 320 mm diam. stainless steel floating discs. Radial callipers with four pistons. Metal braided brake pipe. Rear: Stainless steel disc Ø 240mm. Single piston calliper. Metal braided brake pipe. Wheel rims Aluminium alloy Front: 3.50 X 17″ Rear: 6.00 x 17″ Tyres Radial tubeless tyres; front: 120/70 ZR 17 rear: 180/55 ZR 17 Dimensions Max. length 2,216 mm Max. width 905 mm (at handlebar) Max. height 1,185 mm (at instrument panel) Saddle height 870 mm Wheelbase 1,505 mm Trail 108 mm Steering angle 26° Tank 12 lt (range > 200 km)

2008 Triumph Rocket III specifications and pictures

0

Filed Under (Triumph) by admin on 06-11-2010

download
Triumph Rocket III 2008 Picture credits – Triumph . Click to submit more pictures. 2008 Triumph Rocket III More pictures… Discuss this bike Rate this motorbike This bike’s rating Write a review Sell this motorcycle Such bikes for sale Tip a friend List related bikes General information Model: Triumph Rocket III Year: 2008 Category: Custom / cruiser Rating: 68.5 out of 100. Show full rating and compare with other bikes Engine and transmission Displacement: 2294.00 ccm (139.98 cubic inches) Engine type: In-line three Stroke: 4 Power: 140.00 HP (102.2 kW)) @ 6000 RPM Torque: 147.00 Nm (15.0 kgf-m or 108.4 ft.lbs) @ 2500 RPM Compression: 8.7:1 Bore x stroke: 101.6 x 94.3 mm (4.0 x 3.7 inches) Fuel system: Injection. Multipoint sequential electronic fuel injection Fuel control: DOHC Ignition: Digital – inductive type – via electronic engine management system Cooling system: Liquid Gearbox: 5-speed Transmission type final drive: Shaft drive (cardan) Clutch: Wet. multi-plate Physical measures Dry weight: 319.3 kg (704.0 pounds) Seat height: 739 mm (29.1 inches) If adjustable, lowest setting. Overall height: 1,166 mm (45.9 inches) Overall length: 2,499 mm (98.4 inches) Overall width: 970 mm (38.2 inches) Wheelbase: 1,694 mm (66.7 inches) Chassis and dimensions Frame type: Tubular steel. twin spine Rake (fork angle): 32.0° Front suspension: 43mm upside down forks Rear suspension: Chromed spring twin shocks with adjustable preload Front tyre dimensions: 150/80-R17 Rear tyre dimensions: 240/50-R16 Front brakes: Double disc Front brakes diameter: 320 mm (12.6 inches) Rear brakes: Single disc Rear brakes diameter: 316 mm (12.4 inches) Speed and acceleration Fuel capacity: 23.84 litres (6.30 gallons) Color options: Claret. Phantom Black Further information Parts and accessories Check out parts and accessories from our partners. Ask questions Join the 08 Triumph Rocket III discussion group, the new Triumph forum at Bikez.name or the new Custom / cruiser forum at Bikez.name. Insurance, loans, testsSearch the web for dealers, loan and insurance costs, tests, customizing, etc. Related bikes List related bikes for comparison of specs

Incoming search terms:

Aprilia PEGASO 650 FACTORY – Technical specifications

0

Filed Under (Aprilia) by admin on 26-10-2010

download
Engine Single-cylinder four-stroke with light alloy cylinder. Liquid cooling with three way pressurised circuit. Single overhead cam with chain timing drive; four valves. Anti- vibration balancer shaft. Fuel Unleaded fuel. Bore and stroke 100 x 84 mm. Total displacement 660 cc. Compression ratio 10:1. Max. power at crankshaft 48 HP (35 kW) at 6,000 rpm. Max. torque at crankshaft 6.01 kgm ( 59 Nm) at 5,000 rpm. Fuel system Integrated electronic engine management system. Electronic fuel injection. 44 mm throttle body. Ignition Electronic. Starting Electric starter. Alternator 290 W Lubrication Dry sump with oil pump. Gearbox 5 speed. Transmission ratios: 1st 12/30 2nd 16/26 3rd 20/23 4th 22/20 5th 26/20 Clutch Multi-plate in oil bath. Cable operated. Primary drive Spur gears. Transmission ratio: 36/75. Final drive Chain. Transmission ratio: 15/44. Frame Steel, open cradle, single spar frame. Front suspension 45 mm fork. Wheel travel 140 mm. Rear suspension High strength steel swingarm. Aprilia Progressive System (APS) rising rate linkages. Sachs hydraulic monoshock with adjustable rebound and preload. Wheel travel 130 mm. Brakes Front: FTE stainless steel floating disc, ∅ 320 mm. Four piston radial caliper with radial master cylinder. Rear: stainless steel disc, ∅ 240 mm. Floating caliper