SUZUKI SV1000S EMISSION CONTROL INFORMATION/ SERVICE MANUAL

0

Filed Under (Suzuki) by admin on 26-02-2011

download
EMISSION CONTROL SYSTEMS FUEL INJECTION SYSTEM SV1000S motorcycles are equipped with a fuel injection system for emission level control. This fuel injection system is precision designed, manufactured and adjusted to comply with the applicable emission limits. BEFORE-PRESSURIZED FUEL PRESSURIZED FUEL * I’ RELIEVED FUEL ~%~~~ Ift 0 0 9 0 0 0 EMISSION CONTROL INFORMATION 9-3 CRANKCASE EMISSION CONTROL SYSTEM The engine is equipped with a PCV system . Blow-by gas in the engine is constantly drawn into the crankcase, which is returned to the combustion chamber through the breather hose, air cleaner and throttle body . C * FRESH AIR FUEL/AIR MIXTURE 411111110 BLOW-BY GAS 9-4 EMISSION CONTROL INFORMATION EXHAUST EMISSION CONTROL SYSTEM (PAIR SYSTEM) The exhaust emission control system is composed of the PAIR system and THREE-WAY CATALYST system. The fresh air is drawn into the exhaust port with the PAIR solenoid valve and PAIR reed valve . The PAIR solenoid valve is operated by the ECM, and the fresh air flow is controlled according to the TPS, ECTS, IATS, ZAPS and CKPS. H02 sensor (Except for USA) I 0 0 0 0 0 NOISE EMISSION CONTROL SYSTEM TAMPERING WITH THE NOISE CONTROL SYSTEM PROHIBITED : Federal law prohibits the following acts or the causing thereof: 1. The removal or rendering inoperative by any person, other than for purposes of maintenance, repair or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use, or 2. The use of the vehicle after such device or element of design has been removed or rendered inoperative by any person. AMONG THOSE ACTS PRESUMED TO CONSTITUTE TAMPERING ARE THE ACTS LISTED BELOW : • * Removing or puncturing the muffler, baffles, header pipes, screen type spark arrester (if equipped) or any other component which conducts exhaust gases . • * Removing or puncturing the air cleaner case, air cleaner cover, baffles or any other component which conducts intake air . • * Replacing the exhaust system or muffler with a system or muffler not marked with the same model specific code as the code listed on the Motorcycle Noise Emission Control Information label . EVAPORATIVE EMISSION CONTROL SYSTEM (FOR E-33)

Moto Guzzi Breva V1100 Repair Manual

0

Filed Under (Moto Guzzi) by admin on 18-11-2010

download
1.2. GENERAL RULES 1.2.1. BASIC SAFETY RULES CARBON MONOXIDE When an operation must be performed with the engine running, position the motorcycle outdoors in a well-ventilated area. Never run the engine in an enclosed place. Use an exhaust emission extraction system when working indoors. DANGER Exhaust gases contain carbon monoxide, a poisonous gas which, if inhaled, may cause loss of consciousness or even death. FUEL DANGER The fuel used to operate engines is highly flammable and becomes explosive under particular conditions. Refueling and maintenance operations should be carried out in a well-ventilated area, with the engine off. Do not smoke when refueling or in the proximity of sources of fuel vapors. Avoid contact with bare flames, sources of sparks and any other source which may ignite fuel or lead to explosion. DO NOT DISPOSE OF FUEL IN THE ENVIRONMENT. KEEP AWAY FROM CHILDREN. HOT COMPONENT PARTS The engine and exhaust component parts become hot when the engine is running and will stay hot for some time after the engine has been stopped. Wear insulating gloves before handling these components or allow for the engine and the exhaust system to cool down before proceeding. USED GEARBOX AND FORK FLUIDS DANGER Wear latex gloves when servicing. Prolonged or repeated contact with gear fluid may cause severe skin damage. Wash your hands thoroughly after handling. Dispose of it through the nearest waste oil reclamation firm or through the supplier. Wear latex gloves when servicing. DO NOT DISPOSE OF FLUID IN THE ENVIRONMENT. KEEP AWAY FROM CHILDREN. BRAKE FLUID WARNING Brake fluid can damage plastic, rubber or painted parts. When servicing the brake system, protect all such parts with a clean cloth. Always wear safety glasses when servicing the brake system. Brake fluid is highly irritant. Avoid contact with the eyes. In case of contact with the eyes, rinse abundantly with cool, clean water and immediately seek medical attention. KEEP AWAY FROM CHILDREN