Kawasaki ZX6R/ RR 2003-2004 Frame Slider Installation Instructions

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
1. Locate and remove right engine stud. Tip: Both main engine studs on the ZX6R tend to be very tight from the factory, use a stubby socket to remove stud. Make sure you have good engagement or the head of the bolt can strip. 2. Mount Right side frame slider using 99-HB-SH101250110 Socket Cap 10 X 1.25 X 110 Main Engine Stud and torque down to OEM torque specs. 3. Remove the left side OEM motor mount bolt. 4. Using the 10 X 1.25 X 110 Bolt supplied in the kit: Use the 99-SP-750-4200-L Left Side Bell Type Spacer Black Anodized 5. The small end of the (99-SP-750-4200-L Left Side Bell Type Spacer Black Anodized) goes against the left side of the frame. The longer of the two frame sliders goes on top of the spacer. Using the 10 X 1.25 X 110 Socket Cap mount and torque down to OEM specs