HONDA XL 1000 V VARADERO 2005 AKRAPOVIC SLIP- ON SP SERIES EXHAUST SYSTEM

0

Filed Under (Honda) by admin on 21-11-2011

download
coat the bolt and interior side of the metal clamp with Akrapovic anti-seize lead-free copper paste (black tube)
2. correctly position and install the graphite inner sleeve and metal clamp 3. slide the link pipe onto the stock collector 4. hand tighten the bolt of the link pipe bracket 5. make sure the link pipes are not touching the frame and other parts 6.
perform the process on both sides of the motorcycle installing the muffler: 1. position the muffler correctly and slide it onto the outlet side of the link pipe (Figure 17) 2. attach the springs at the muffler – link pipe joint (Figure 18) 3. correctly position the carbon-fiber clamp and slide it onto the muffler – bear in mind the left offset of the carbon-fiber clamp for the right muffler and the right offset for the left muffler viewed from the rear. WARNING: open the clamp to slightly wider than the diameter of the outer sleeve of the muffler – do not scrape it along the muffler outer sleeve! (Figure 19) 4. hand tighten the carbon-fiber clamp onto the stock chassis hanging bracket – use the bolts, washer and spacers supplied in the Akrapovic kit. Do not fully tighten. Make sure the additional parts from the Akrapovic kit are correctly installed. (Figure 20, 21, 22) 5. make sure the muffler is not touching other parts of the motorcycle 6. perform the process on both sides of the motorcycle final installation: 1. tighten the bolt of the link pipe bracket (Figure 23) 2. tighten the carbon-fiber clamp (Figure 24) 3. tighten the metal clamp at the Akrapovic link pipe – stock collector joint (Figure 25) 4. perform the process on both sides of the motorcycle 5. clean grease spots: a. muffler – titanium outer sleeve: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40 or equivalent) b. muffler – carbon-fiber outer sleeve: use a soft dry cloth c. stainless steel link pipe: use a soft cloth sprayed with a contact cleaner, then wipe with a soft dry cloth Cleaning will prevent spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the sticker. 6. reattach side panels (Figure 26) 7. reconnect the electric connectors for turn signal lamps (Figure 27) 8. reattach the cable for locking / unlocking the seat (Figure 28) 9. reattach the passenger handlebars and top case plate (Figure 29, 30, 31, 32) 10. reattach both seats (Figure 33) 11. position of the installed Akrapovic Slip-on SP series system (Figure 34)

Aprilia RSV4 Exhaust Systems Installation instructions

0

Filed Under (Aprilia) by admin on 26-10-2010

download
REMOVAL OF STOCK EXHAUST SYSTEM 1. 2. 5 Figure 3 Figure 4 Remove the metal collar and rubber damper from the stock muffler hanging bracket (Figure 3, 4). 3. 6 Unscrew the marked bolts and remove the plastic fasteners from the left and right side of the cowling (Figure 5, 6). 4. Figure 5 Figure 6 7 Unscrew the marked bolts and remove the lower part of the cowling (Figure 7). 5. Figure 7
8 Figure 8 Figure 9 Coat the bolt and interior of the metal clamp with spring hook whit Akrapovič anti-seize lead-free copper paste (black tube) and correctly install it onto the stock collector. Hand tighten the bolt (Figure 9, 10). WARNING: use anti-seize copper paste on bolt threads and interior of the metal clamp! 2. 1. Coat the bolt and interior of the metal clamp with Akrapovič antiseize lead-free copper paste (black tube) and correctly install it onto the link pipe (Figure 8). WARNING: use anti-seize copper paste on bolt threads and interior of the metal clamp