Honda 300 2×4 Lift Kit Installation Instructions

0

Filed Under (Honda) by admin on 11-12-2011

download
This product is designed for us e on ATVs on which additional ground clearance and fender clearance is desired. It is designed for utility type, slower-speed use on relatively flat terrain in deep mud or snow. Although we have many thousands of satisfied lift kit customers and over 400 franchised dealers selling and installing lift kits, purchasers should be aware that use of this product may increase the frequency of required maintenance, part wear, and will raise the center of gravity on your ATV increasing risk of roll-over on side hills, ditches or other steep terrain. We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to improve stability of the ATV. Riders should be advised that the handling characteristics of a taller ATV are different and require extra care when riding on side hills or off-camber situations. If you further raise the center of gravity by adding heavy loads to racks or seats, the ATV must be operated with care, at slower speeds or on relatively flat ground. Operation of an ATV with or without a lift kit, while or shortly after consuming alcohol or drugs, subjects the rider to the risk of serious bodily harm or possible death. This is compounded if the rider does not wear an approved helmet and other safety gear. High Lifter urges that all approved safety gear be worn when riding an ATV. If this is not what you expected, or is not consistent with your intended use, you should return the product immediately to the seller, before installation, for a refund of the purchase price; less any fees. After installation, product is warranted for 90 days for defects in workmanship and materials. Warranty is limited to refund of the purchase price or replacement of the kit, at the seller’s option.

2002 Ducati Monster 620ie Dark SPECIFICATIONS AND PERFORMANCE DATA

0

Filed Under (Ducati) by admin on 02-12-2010

download
Type: ……………. air-cooled, 90°L-twin Valvetrain: ..desmodromic, two valves per cylinder, shim-on-valve-stem Size: ……………………………………618cc Bore/stroke:……….80.0mm x 61.5mm Comp. ratio: ………………………. 10.7:1 Fueling: ……………………Marelli 5.9 EFI with two 45mm throttle bodies Exhaust:………………………………2-1-2 DRIVE TRAIN Transmission: …………………. 5-speed Final drive: ……..No. 530 O-ring chain, RPM @ 65 mph/redline….4890/9500 DIMENSIONS Wheelbase: ………………………….. 56.7″ Rake/trail……………………..24.0°/3.54″ Ground clearance: ……………………4.4″ Seat height :…………………………..29.9″ GVWR: …………………………….881 lbs. Wet weight: …………………….. 424 lbs. Carrying capacity: ………………457 lbs. SUSPENSION Front: 43mm inverted cartridge forks, non-adjustable, 5.1″ travel Rear: ……..Sachs monoshock damper with progressive rocker linkage, adj. preload and reb. damping, 5.8″ travel BRAKES Front:……single 320mm disc, Brembo four-piston, double-action caliper Rear: …………………………245mm disc, twin-piston, double-action caliper TIRES & WHEELS Front: …….. 120/60ZR17 Dunlop D205 Sportmax on 3.50″ x 17″ wheel Rear:………. 160/60ZR17 Dunlop D205 Sportmax on 4.50″ x 17″ wheel ELECTRICS Battery: …………………………12V, 12AH Ignition: …………..digital-mapped with throttle position sensor Headlight: …………………………55/60W FUEL Tank capacity: ……………………4.0 gal. High/low/avg. mpg: ….47.7/56.0/ 51.9 MISCELLANEOUS Instruments: ………………speedo, tach, odometer, tripmeter, Indicators: …….. hi-beam, t/s, neutral, oil pressure, immobilizer, LCD clock MSRP: ……………………………… $6495 Valve adj. interval: ……………. 6000 mi. Warranty: ….2 years, unlimited miles. Color: …………………………matte black PERFORMANCE Measured top speed……116.0 mph 0-1/4 mile………………12.52 sec. @ 104.24 mph 0-60 mph………………..4.31 sec. 0-100 mph………………12.29 sec. 60-0 mph……………………113.7′ Power to Weight Ratio……..1:7.81 Speed @ 65 mph indicated ….62.5 Low end Mid-range Top end The 620′s motor produces plenty of thrust with a wide, torquey powerband. High-tech fuel injection gives excellent throttle response and delivers terrific gas mileage, too. The 90°V- twin is smooth running and looks good exposed. TEST NOTES PICKS Terrific value for the price, especially for a Ducati Highly tuned engine doesn’t disappoint Light weight and good handling adds up to fun PANS Clutch shudders and grabs when hot Mirrors need to be wider and further forward Matte black everything isn’t particularly flattering

Wangye WY250T SPECIFICATION AND USER MANUAL

0

Filed Under (Wangye) by admin on 25-11-2010

download
item Data Item Data L×W×H mm 2015×680×1210 Front Tyre T 130/160-13 Wheelbase mm 1350 Rear Tyre 110/180-10 Ground Clearance mm 101 Air Pressure of Fr tyre 200 kPa Dry weight kg 160kg Air Pressure of Rr tyre 250 kPa Max Load kg 150kg Transmission system CVT Turning angle of steering handle ≤48° Ratio 5.12~15.05 Brake base mm ≤7(30km/h) Engine Type 169MM Single Cylinder、4 stroke、 water-cooled Max Speed km/h ≥85km/h Bore×stroke mm 69×66.8 Consumption L/100km ≤3.1L/100km Displacement ml 249.8 Climb ability º ≥18 Clutch automatically centrifugal Light vertical angle -1.3% Fuel tank L 7 Starting system Electric Battery 12V 9Ah – 4 – Table 2 Item specification Item Specification Lubricative System Press & splash Ignition System CDI Rated Power 10.5kW/6500(r/min) Fuse 15 A Max Torque 17.6N.m/5000(r/min) Front light 12V 35W/35W×2 Compression ratio 10.01 ∶ Tail/stop light 12V P21/5W Spark Plug Model DPR7EA(NGK) 、D7RTC或DPR6EA License light 12V 5W Spark plug gap mm 0.6~0.7 mm Turning light 12V 10W×4 Gap of valve 0.1(cold) Fuel RQ90 above Idling speed (1500±150)r/min Gearbox oil SAE 80W/90 Engine oil SF SAE 10W/40 capacity of gear box 0.18L Capacity of engine oil 1.1L

Incoming search terms:

SUZUKI VX800 SPECIFICATIONS AND SERVICE MANUAL

0

Filed Under (Suzuki) by admin on 25-11-2010

download
DIMENSIONS AND DRY MASS Overall length ………………………… 2280 mm (89.8 in) . . . E15, 16, 17, 22, 25, 39 2355 mm (92.7 in) . . . El8 2255 mm (88.8 in) . . . Others Overall width ………………………… Overall height ………………………… Wheel base …………………………… 805 mm (31.7 in) 1115 mm (43.9 in) . . . E03, 28,33 1085 mm (42.7 in) . . . Others 1565 mm (61.6 in) . . . E03,33 1555 mm (61.2 in) . . . Others Ground clearance ……………………… Seat height ………………………….. Dry mass …………………………… 145 mm ( 5.7 in) 800 mm (31.5 in) . . . EOI, 03, 28,33 795 mm (31.3 in) . . . Others 214 kg (472 Ibs). . . E33 213 kg (470 Ibs) . . . Others ENGINE Type ………………………………. Valve clearance ……………………….. Number of cylinders. …………………… Bore ………………………………. Stroke …………………………….. Piston displacement ……………………. Compression ratio …………………….. Carburetor, Front. …………………….. Rear ……………………… Air cleaner ………………………….. Starter system ……………………….. Lubrication system …………………….. Four-stroke, water-cooled, OHC, TSCC, 45″ V-twin 0.08 – 0.13 mm (0.003 – 0.005 in) 2 83.0 mm (3.268 in) 74.4 mm (2.929 in) 805 cm3 (49.12 cu. in) 10.0 : 1 MI KUN I BDS36SS, single MI KUN I BS36SS, single Polyester fiber element Electric starter motor Wet sump TRANSMISSION Clutch …………………………….. Transmission ………………………… Gearshift pattern ……………………… Primary reduction ratio …………………. Gear ratios, Low ……………………… 2nd ………………………. 3rd ………………………. 4th ………………………. Top ……………………… Secondary reduction ratio ……………….. Wet multi-plate type 5-speed constant mesh 1 -down, 4-up 1.690 (71/42) 2.285 (32/14) 1.631 (31/19) 1.227 (27/22) 1 .OOO (25/25) 0.851 (23/27) 1.133 (17/15x 30/30) . . . E03,33 1.096 (17/15x 30/31) . . . Others 3.090 (34/l 1) Final reduction ratio …………………… Drive system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shaft drive

Rokon Motorcycle Trail-Breaker SPECIFICATION

0

Filed Under (Rokon) by admin on 23-11-2010

Model: Rokon Trail-Breaker
Engine and transmission
Displacement: 172.00 ccm (10.50 cubic inches)
Engine type: Single cylinder, four-stroke
Power: 6.60 HP (4.8 kW)) @ 4000 RPM
Fuel system: Carburettor
Ignition: Electronic Magneto
Cooling system: Liquid
Gearbox: 3-speed
Fuel consumption: 0.45 litres/100 km (222.2 km/l or 522.71 mpg)
Greenhouse gases: 10.4 CO2 g/km. (CO2 – Carbon dioxide emission)
Exhaust system: Muffler with US Forestry approved spark arrestor
Chassis, suspension, brakes and wheels
Front tyre dimensions: 5.90-15
Rear tyre dimensions: 5.90-15
Front brakes: Single disc
Rear brakes: Single disc
Physical measures and capacities
Dry weight: 94.3 kg (208.0 pounds)
Power/weight ratio: 0.0700 HP/kg
Overall height: 762 mm (30.0 inches)
Overall length: 2,007 mm (79.0 inches)
Overall width: 787 mm (31.0 inches)
Ground clearance: 381 mm (15.0 inches)
Wheelbase: 1,295 mm (51.0 inches)
Fuel capacity: 10.18 litres (2.69 gallons)

Incoming search terms:

2011 Kawasaki W800 Specifications

0

Filed Under (Kawasaki) by admin on 17-11-2010

ENGINE

* Engine type Air-cooled, 4-stroke Vertical Twin
* Displacement 773 cm³
* Bore x stroke 77.0 x 83.0 mm
* Compression ratio 8.4:1
* Valve/Induction system SOHC, 8 valves
* Fuel system Fuel injection:?34 mm x 2 with sub-throttles
* Ignition Digital
* Starting Electric
* Lubrication Forced lubrication, wet sump

DRIVETRAIN

* Transmission 5-speed, return
* Final Drive Chain
* Primary reduction ratio 2.095 (88/42)
* Gear ratios: 1st 2.353 (40/17)
* Gear ratios: 2nd 1.590 (35/22)
* Gear ratios: 3rd 1.240 (31/25)
* Gear ratios: 4th 1.000 (28/28)
* Gear ratios: 5th 0.851 (23/27)
* Final reduction ratio 2.467 (37/15)
* Clutch Wet multi-disc, manual

FRAME

* Frame type Double-cradle, high-tensile steel
* Wheel travel, front 130 mm
* Wheel travel, rear 105 mm
* Tyre, front 100/90-19M/C 57H
* Tyre, rear 130/80-18M/C 66H
* Rake/Trail 27° / 108 mm
* Steering angle, left / right 37° / 37°

SUSPENSION

* Suspension, front 39 mm telescopic fork
* Suspension, rear Twin shocks
* Type: Twin shocks
* Spring preload: 5-way

BRAKES

* Brakes, front Type: Single 300 mm disc
* Caliper: Twin-piston
* Brakes, rear Type: Drum, 160 mm

DIMENSIONS

* Dimensions (L x W x H) 2,180 x 790 x 1,075 mm
* Wheelbase 1,465 mm
* Ground Clearance 125 mm
* Seat height 790 mm
* Curb Mass 216 kg
* Fuel capacity 14 litres

ATK 450 MX SPECIFICATIONS

0

Filed Under (Atk) by admin on 16-11-2010

Model: ATK 450 MX Year: 2008 Category: Enduro / Engine and transmission Displacement: 449.00 ccm (27.40 cubic inches) Engine type: Single cylinder, four-stroke Power: 48.00 HP (35.0 kW)) @ 10000 RPM Compression: 12.3:1 Bore x stroke: 95.0 x 63.4 mm (3.7 x 2.5 inches) Fuel system: njection. EFI Fuel Injection Fuel control: DOHC Ignition: 12v Battery w Constant Energy Inductive Coil Cooling system: Liquid Gearbox: 5-speed Clutch: Magura Hydraulic Chassis, suspension, brakes and wheels Frame type: Aluminum Twin-Spar Front suspension: 46mm Ohlins 12” Travel Front suspension travel: 305 mm (12.0 inches) Rear suspension: Ohlins POS 12.6” Travel Rear suspension travel: 320 mm (12.6 inches) Front brakes: Single disc. Dual piston, 240mm Rotor Front brakes diameter: 240 mm (9.4 inches) Rear brakes: Single disc. Dual piston, 220mm Rotor Rear brakes diameter: 220 mm (8.7 inches) Physical measures and capacities Dry weight: 109.8 kg (242.0 pounds) Power/weight ratio: 0.4373 HP/kg Seat height: 965 mm (38.0 inches) If adjustable, lowest setting. Ground clearance: 361 mm (14.2 inches) Wheelbase: 1,486 mm (58.5 inches) Other specifications Starter: Electric

2010 EVEL ONE COMMEMORATIVE BOBBER Owners Manual

0

Filed Under (Tips and Review) by admin on 15-11-2010

download
Commemorative Bobber Year 2010 ∗ Rear Tire -Avon Cobra, 200/55R18,79V ∗ Front Tire – Avon Cobra, 120/70-21,62V ∗ Frame Type -Soft tail Bobber ∗ Engine Standard – 80cu.in/1340cc Evolution ∗ Transmission Standard – 6 Speed LSD ∗ Primary Drive – Wet, Chain drive BDL ∗ Final Drive – Belt ∗ Fuel Capacity -3.5 Gallons/13.24Liters ∗ Oil Capacity – 3 qt/2.83 Liters ∗ Seat Height – 25.5″/64.77 cm ∗ Ground Clearance – 5.25″/13.33 cm ∗ Wheelbase -65.5″/166.37cm ∗ Rake – 34Degrees ∗ Mass of Vehicle in Running Order – 617 lbs. /280 kgf ∗ Maximum technically permissible mass – 1016 lbs. /461 kgf ∗ Front Suspension – Telescoping ∗ Front Brake – 4 Piston ∗ Rear Suspension – Bobber Soft Tail Style ∗ Rear Brake – 4 Piston ∗ Charging Output – 32 Amp ∗ Battery CCA – 270 CCA ∗ Maximum Tire Pressure Front – 34 psi ∗ Maximum Tire Pressure Rear – 36 psi
Dimensions: Wheel base 166.37 cm Overall Length 242.03cm Overall Width 116.84cm Road Clearance 13.33cm Overall Height 122cm Saddle Height 64.77cm Weight: Mass of Vehicle in Running Order 280kgf Maximum technically permissible mass 461kgf Maximum technically permissible mass on each of the axles 158kgf Front, 303kgf Rear Capacities: Fuel Tank 13.24 liter Oil Tank 2.83liter Transmission 591ml-710ml Primary Chain Case 1124ml-1301ml

Vespa Rally 200 General specification

0

Filed Under (Vespa) by admin on 11-11-2010

download
Consumption (according to CUNA Standards) : 3 It 100 Km. (78 mls U.S. gals; 94 mls/imp. gals), gasoline-oil mixture i. e. 2% oil. Max. speed (CUNA Standards): 110 Km/h (68 mph). Carrying capacity: 2 persons and 10 Kg. (22 lbs.) of luggage. Range 280 Km (174 mls) Max fuel capacity: 8.2 It. (2.13 U.S. galls or 1.8 imp. galls) (incl. 1.8 It. s 0.47U.S. galls or 0.39 imp.galls of reserve). Wheel base: 1230 mm (48″.4) Handlebar width: 690 mm (27″.6) Total length 1770 mm (69″.6) Max height 1070 mm (42”.1) Min. ground clearance: 130 mm ( 5″.2) Turning radius: 1400 mm (55″.0) Total dry weight 103 Kg. (226.5 lbs) ENGINE: single horizontal cylinder, two stroke rotary distribution: i. e., carburated mixture is regulated bythecrankshaft rotation, with three transfer ports. Bore: 66.5 mm (2″.62) Stroke: 57 mm (2″. 24) Cylinder displacement: 197,97 cc. (12.076 cu. in.) Compression ratio: 1:8.2. IGNITION: by means of an electronic device that offers many advantages, i. e., allowing to produce a higher tension peak reached in a very short time and with a very limited length of the discharge. It follows: 1) Engine regular running also with spark-plugs very dirty. 2) Starting facility when cold. 3) Light ignition and combustion of the fuel. 4) Higher life of the spark – plugs because of a smaller electrodes wear. 5) Unalterability, during the time, of the ignition advance because the traditional mechanical devices exposed to the wear (as the contact breaker cam, contact breaker, sliding block etc.) are not longer present.

APRILIA PEGASO 650 STRADA Assembling instructions

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Centre stand APRILIA PEGASO 650 STRADA Item-No.: 505.791 2 quantitem no. description 1 712.1002centre stand 2 151.124 bolt 17,7 x ø40 2 150.994 washer ø19 x ø30 x 2,7 4 150.995 washer ø8,4 x 3 2 150.841 hexagon bolt screw M 8 x 30 2 150.978 retaining pin 3,2 x 40 1 150.979 spring set Typ 5 1 275.001 limitation rubber The kit includes the following parts: Please check now the function of your centre stand and control all screw connections after the assembly for tightness! General: Centrestand cornering clearance: HEPCO & BECKER centerstands are carefully designed and tested to eliminate reductions in cornering clearance and ground clearance under most driving conditions on an unmodified stock motorcycle, and are certified to be compliant with European ABE safety standards. Use of any centrestand may reduce corning clearance or ground clearance under extreme driving situations. HEPCO & BECKER products should be installed by a qualified, experienced motorcycle technican. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. HEPCO & BECKER takes no resposibility for demages caused by improper installation. All screws, bolts, and nuts, including all replacement hard ware provided by HEPCO & BECKER, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: M 6 – 9,6 Nm M 8 – 23 Nm M 10 – 46 Nm All screws, bots und nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., „Locktite”

Incoming search terms: