HARLEY DAVIDSON SOFTAIL SPROCKET KIT INSTALLATION NOTES

0

Filed Under (Harley Davidson) by admin on 29-01-2011

download
NORMAL TOOTH WARRANTY This extended warranty applies only to the normal wear that will occur to the tooth profile geometry on the rear belt sprocket. Normal wear is considered wear that occurs when the protective hard coating has worn away exposing the underlying aluminum, changing the profile of the sprocket tooth significantly. Warranty is for five years from date of purchase with unlimited mileage. Warranty claims will require a dated receipt showing proof of purchase from an authorized Harley-Davidson Dealer. Warranty only applies to original purchaser of the sprocket. Original owners name must appear on the receipt. All applications of the sprocket require installation of upper and lower original equipment belt guard, or Harley-Davidson accessory belt guards where applicable. Warranty is voided if these items are not installed. Excessive chips found in the tooth profile due to abnormal riding conditions will void warranty. Occasional chips in the tooth are to be considered normal and should not be considered a warranty issue. Decorative external chrome carries the standard parts and accessories 90 day warranty. Staking the flange on the backside of the sprocket will pierce through the chrome, this is to be considered a normal process and should not be considered an issue. All warranty claims must be pursued through your authorized Harley-Davidson Dealer

HARLEY DAVIDSON DETACHABLE DYNA SIDEPLATE KIT INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 29-01-2011

download
Additional Parts Required The appropriate docking hardware and possibly a directional relocation kit must be installed prior to installation of this side- plate kit. These kits must be purchased separately from a Harley-Davidson Dealer. Table 1. Docking Hardware Kits Model Year Docking Hardware Kit FXDWG 53964-06 only Table 2. Directional Relocation Kits Model Year Docking Hardware and Directional Relocation Kit All except FXDWG 53961-06 and 53968-06 If mounting this kit with Saddlebags, part number 53968-06 is not required. Loctite® 262 (red), Part Number 94759-99, is available from your Harley-Davidson Dealer. Kit Contents Table 3. Kit Contents Part Number Description (Quantity) 52869-06 Side Plate, detachable, right 52870-06 Side Plate, detachable, left 94592-98 Button head screws (4) SISSYBAR INSTALLATION 2 3 1 4 1 is 01079 1. Sideplate 2. Sissybar 3. Buttonhead screw 4. Rotary latch Figure 1. Detachable Sissybar Sideplate Assembly See Figure 1. Install new or existing sissybar (2) to detachable sideplates (1) using four buttonhead screws (3). Apply Loctite® 262 (red) to screws before installation. Tighten screws to 96- 120 in-lbs (11-14 N-m)

Incoming search terms:

HARLEY DAVIDSON CUSTOM SHIFTER PEG KIT INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 29-01-2011

download
Service Manual for your model motorcycle is available from a Harley-Davidson Dealer. Kit Contents See Figure 1 and Table 1. INSTALLATION 1. Remove and discard previously installed shifter peg from motorcycle. If needed, use a heat gun to apply heat to the shift lever and shifter peg threads to aid in peg removal. 2. See Figure 1. Insert the screw through the peg, tread, spacer (if required) into the shift lever. Tighten screw to 11-15 ft-lbs (15-20 Nm)

HARLEY DAVIDSON REAR THUNDERSTAR WHEELS INSTALLATION, MAINTENANCE AND CLEANING

0

Filed Under (Harley Davidson) by admin on 29-01-2011

download
INSTALLATION 1. Remove existing rear wheel assembly. Save axle, axle nut, brake disc and wheel spacers for kit installation. Refer to the service manual. NOTES Prior to removing or installing the wheel, the rear brake caliper must be removed. The cotter pin or spring clip for the axle nut must be replaced. They are available for purchase from a Harley-Davidson dealer. Do not re-use brake disc screws. Re-using disc screws can result in torque loss and damage to rotor and/or brake assembly. (00319b) Do not re-use sprocket mounting screws. Re-using sprocket mounting screws can result in torque loss and damage to the sprocket and/or belt assembly. (00480b) 2. See Figure 1. Install valve stem assembly (E) on wheel. Refer to the service manual. 3. Assemble wheel installation kit components, stock brake disc, and sprocket to wheel using the appropriate service parts table. Refer to the service manual. NOTES Install the primary bearing first, following the instructions in the service manual and using the WHEEL BEARING REMOVER/INSTALLER. The machined grooves in the hub face indicate the primary bearing side. 4. Install rear wheel (1), stock axle, and stock spacers to motorcycle. Refer to the service manual. MAINTENANCE AND CLEANING NOTE This wheel assembly includes plugs that have been installed in the openings between the brake disc mounting holes on one side of the wheel and in the compensator bowl of the 16×5 inch wheel. Missing or damaged plugs can be replaced using Wheel Plug Kit (44459-04) or individual plug (43871-09 – 16×5 inch wheel). Chrome parts must be maintained regularly so they keep their original shine and luster. 1. Clean heavily-soiled wheel surfaces using Harley-Davidson Wheel and Tire Cleaner, applied with Harley Wheel and Spoke Brush. 2. Thoroughly clean chrome with a good quality chrome cleaner, such as Harley Bright Chrome Cleaner. 3. After cleaning and polishing, seal the finish with a good quality sealer, such as Harley Glaze Polish and Sealant

Incoming search terms:

HARLEY DAVIDSON FENDER POUCH Installation Instructions

0

Filed Under (Harley Davidson) by admin on 29-01-2011

download
This kit is designed to fit 1986 and later Softail, 1991 and later Dyna, and 1986 and later XL model motorcycles, except models with luggage racks or Bobtail style fenders1. Remove license plate and bracket from fender. Save all hardware for reinstallation. 2. Remove license plate from license plate bracket. Save all hardware for reinstallation. 3. See Figure 1. Slip nylon “slip” (1) on fender pouch (2) over license plate bracket post (3). 4. Remove adhesive backing and place anti-abrasion tape (4) onto the fender where the pouch will make contact with the fender. Press firmly into place. The anti- abrasion tape, H-D Part Number 64269-04 is a serviceable item and can be purchased from your Harley-Davidson dealer. NOTE Failure to use anti-abrasion tape may result in scratches to the fender. 5. Reinstall license plate on license plate bracket. 6. Reinstall license plate bracket, with fender pouch nylon mount tab in between license plate bracket and fender, as shown