HONDA VTX DESTINATIONS FUEL SYSTEM INSTALLATION

0

Filed Under (Honda) by admin on 10-02-2012

download
WHY CHOOSE A VTX? Riders have always chosen Hondas because they want to ride. Really ride. They like the performance. The reliability. The build quality. They know that a Honda is a bike you can rely on for decades, and thousands of miles. Our 2008 Honda VTX® cruisers still offer all that. But along the way, we’ve added another feature: drop-dead-gorgeous good looks. It used to be you had to choose between performance and style. Between reliability and looks. But with a Honda VTX, you can have it all. Maybe you’re content to trailer your bike places, or to just ride it ten minutes at a time and then get off and pose. Hey, whatever turns your crank—it’s your life. But when you want to actually ride, well, then there’s only one choice

Honda VTX C 1800/ 1300 Backrest Kit Installation Manual

0

Filed Under (Honda) by admin on 04-01-2012

download
We highly recommend use of Loctite о on all nuts and bolts and check your hardware on regular basis. 1) Install the backrest bars with the pad. Do not tighten the bolts until the backrest is assembled with the brackets Install the brackets and backrest. The longer collars go to the front mounting holes. Do NOT tighten all the bolts until everything is assembled. We highly recommend red loc-tite о or any other compound will prevent bolts getting loose from vibration. Check bolts and metal parts periodically to make sure they are securely fastened

HONDA VTX BRAKE CALIPER COVER INSTALLATION INSTRUCTIONS

0

Filed Under (Honda) by admin on 29-01-2011

download
1. Clean caliper face with rubbing alcohol making sure it is free of grease, oil & debris. 2. If the caliper is below 70 degrees, warm it with a hair dryer. 3. Peel off the self-adhesive backing, press into place & firmly hold for 30 seconds

HONDA VTX, VTX RETRO AND VALKYRIE DRIVE SHAFT COVER INSTALLATION INSTRUCTIONS

0

Filed Under (Honda) by admin on 21-12-2010

download
1. Place the cover over the drive shaft housing. 2. Hook one end of the springs provided into the lower holes. Wrap the springs around the backside of the drive shaft housing. Using a needle nose pliers stretch the springs and hook them into the upper holes. 3. Note; if springs are too long, shorten and reform end to be able to hook spring in place.

Incoming search terms: