HARLEY DAVIDSON FRONT BRAKE DISC LOCK INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 20-03-2011

download
INSTALLATION Do not operate vehicle with brake disc lock in place. Operation with lock on disc will restrict movement of the wheel, which could result in death or serious injury. (00457b) NOTE Insert key all the way to the bottom of the cylinder. Turn key clockwise 180 degrees to the open position. DO NOT FORCE KEY! Key should turn freely. If key does not freely rotate, try turning key slightly left and right while inserting to align disks inside cylinder. Failure to insert key all the way to the bottom of cylinder could cause key to jam. For Models with Hydraulic Fork Front Ends 1. See Figure 1. Insert reminder cord (3) into slot on disc lock (1). 2 1 3 is 01599 1. Lock 2. Caliper 3. Reminder cord Figure 1. Installing Disc Lock 2. Slide lock (1) over front brake disc as close to rearward edge of brake caliper (2) as possible. Push button completely down to lock. 3. Roll motorcycle forward slowly until lock gently contacts caliper. 4. See Figure 3. After installing disc lock, place loop end (1) of reminder cord (2) over handlebar grip. For Models with Springer Front Ends 1. See Figure 2. Insert reminder cord (5) into slot on disc lock