HONDA GL 1500 FRONT FENDER EXTENSION INSTALLATION MANUAL

0

Filed Under (Honda) by admin on 27-02-2011

download
1. Remove items as shown using straight blade screwdriver. Pry off the two fork cover caps and with a 5mm allen wrench, unfasten the two bolts (Figure 1A). Remove fork cover. a. Pull outward and forward to remove left hand side covers. (Figure 1B) b. Using 8mm and 10mm wrenches, remove the three bolts from the left hand disc cover. Repeat for right side disc cover. (Note for re-installation; the top 10mm bolts (Figure 1C) do not have collars included.) c. Using the Phillips screwdriver, unfasten speedometer cable (figure 1D) d. Using the 8mm wrench, remove the left hand side fender bolts (figure 1E) e. Using the 8mm allen wrench, remove the four top bolts (figure 1F) from the fork stay bracket, and remove bracket. 2. With the rear fender off the motorcycle, hold front fender extension in place and using center punch and hammer, light tap the three drilling locations (figure A). Set the fender extension aside and drill three ΒΌ inch holes at marked locations (figure B). 3. Attach fender extension to fender with hardware provided (figure 3). 4. Re-install all items previously removed in step 1.

Piaggio 250 Installation And Removal Manual

0

Filed Under (Piaggio) by admin on 28-10-2010

download
1. Secure scooter inastableupright position. 2. Attach bracket E to underside of scooter frame -Forward cross brace on E attaches to existing holes on underside of scooter frame. Secure bracket E with new bolts provided. -Ensure bracket E is square with scooter and locate two rear holes on bracket E . Two rear holes on E will align with scooter frame rear cross brace. Drill 3/8 inch holes incross brace to align with rear holes on bracket E . Attach with bolts provided. 3. Attach top of bracket C (left) / D (right) to outside of rear shock mount using new bolt provided. NOTE: A shorter bracket Dis included and required on some MP3250 models. 4. Attach axles and wheels to MiniTrikeframe and orient frame in position behind scooter. 5. Attach bottom of C/D to rear mounting plate on Mini Trike frame