HARLEY DAVIDSON INSTRUMENT GAUGE BEZEL COVER KIT INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 23-03-2011

download
INSTALLATION 1. Clean the instrument bezel and bezel cover with a mixture of 50-70% isopropyl alcohol and 30-50% distilled water. Allow to dry thoroughly. 2. See Figure 1. Cut the tape (1) into five equal pieces. 3. Remove the paper liner from one side of the tape, and apply the tape to the front face of the gauge, pressing firmly into place. Space all five pieces equally as shown. 4. Remove the outer liner from the tape. 5. Place the bezel over the gauge, and press firmly into place. 3 2 4 1 is00986a 1. Tape (cut into 5 pieces) 2. Instrument bezel 3. Instrument bezel cover 4. Apply tape to this surface Figure 1. Chrome Instrument Bezel Installation

HARLEY DAVIDSON CHROME INSTRUMENT BEZEL COVER KIT INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 05-03-2011

download
This kit is designed for installation on voltmeter, fuel gauge, oil pressure and air temperature gauges used on 1986 and later FLT and FLHT models. Kit Contents Table 1. Kit Contents Description Quantity Chrome bezel cover 2 Adhesive tape, double-sided strip 1 There are no Service Parts available with this kit. INSTALLATION NOTE Using a 50:50 mixture of isopropyl alcohol and water, wipe dirt, oil and grease off of instrument bezel and bezel cover before applying double-sided tape or tape may not adhere well. 1. See Figure 1. Cut tape (1) into six equal pieces. 2. Remove paper liner from one side of tape and apply tape to front face of gauge pressing firmly into place. Space all three pieces equally. 3. Remove outer liner from tape. 4. Place bezel over gauge and press firmly into place