TOYOTA/ LEXUS Transponder Bypass TYPE 1 & 2 INSTALLS

0

Filed Under (Toyota Manuals) by admin on 16-09-2011

Download
The 1100X/F-TL interface module is used when installing remote start
products in Toyota/Lexus vehicles equipped with a factory immobilizer.
The 1100X/F-TL allows for easy interfacing between the remote start and
the factory immobilizer, while maintaining the integrity of the OEM sys-
tem. The factory transponder-based anti-theft system uses a small elec-
tronic chip hidden in the key to send a code to the vehicle’s transceiver
when the ignition is energized. The key must be placed in the ignition
and turned to the RUN position. This energizes a coil surrounding the
key, which in turn energizes the chip, which sends a code to the vehicle. If
the vehicle does not detect the code being sent, the vehicle will start and
then immediately shut off or will just crank, and the anti-theft light will
flash. The 1100X/F-TL provides a valid code to the vehicle whenever it is
remote started, but does not affect the immobilizer system during normal
vehicle operation; the immobilizer system remains fully functional

Incoming search terms:

Toyota Corolla 5 Door Hatchback SPECIFICATIONS

0

Filed Under (Toyota Manuals) by admin on 12-06-2011

Download
The Toyota Diagnostic Tester and CAN Interface Module may also be used to perform 2005 model year Corolla Repair Manual, Engine/Hybrid System – Engine

HARLEY DAVIDSON ADVANCED AUDIO HANDS FREE PHONE INTERFACE KIT INSTALLATION

0

Filed Under (Harley Davidson) by admin on 12-04-2011

download
The Hands Free interface module in this kit requires proximity to a BluetoothTM-enabled cellular phone in order to function. The phone must be a model that is compatible with the interface module (go to to view the compatibility chart), and must be paired to the interface module according to the instructions included with the cell phone. NOTE The cell phone MUST be available to the installer in the final steps of the installation (prior to re-installation of the outer fairing) in order to program and test the hands free functions. To avoid unnecessary delays, please take this into consideration when scheduling the installation. FLHT models will require prior installation of an Advanced Audio AM/ FM/ CD Radio Kit (Part Number 76412-06) and a Tour-Pak Mount AM/ FM Antenna Kit (Part Number 76317-06). FLHT, FLHX and FLTR models will require the prior installation of a Tour Pak®. See a Harley-Davidson dealer for avail- ability of color-matched King or Chopped Tour-Paks to match your vehicle, and additional items that may be required when mounting the Tour-Pak to your model. Unless one has already been fitted as part of another Advanced Audio kit installation: FLHTCU models will require the additional purchase of an Ultra Overlay Harness (Part Number 70164-06). FLHT, FLHTC and FLHX models will require the separate purchase of a Communication Switch Kit (Part Number 77173- 06). FLHX models will require the separate purchase of: •a fuel tank console (Part Number 61270-98A), •a console extension (Part Number 52447-96), •a rubber molding (71294-89), •a 1/4-20 clip nut (Part Number 7964), •a button-head screw (Part Number 3652), •a plastic wire clip (Part Number 10120), and •an adhesive-backed metal wire clip (Part Number 10103). FLTR models will require the separate purchase of: •a Console Pod Assembly (Part Number 77136-03), and •three pan-head screws (Part Number 2462). NOTE See a Harley-Davidson dealer for availability of optional decorative inserts for the Console Pod Assembly. ALL models will require the additional purchase of: •a Non-Ultra Overlay Harness (Part Number 70169-06), and EITHER : •a Premium Stereo Helmet Headset (Part Number 77147- 98) OR a Hand-Held CB Microphone Kit (Part Number 76312-98

Incoming search terms:

Incoming search terms: