HARLEY DAVIDSON CHROME SADDLEBAG COVER WINGTIP TRIM KIT INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 15-03-2011

download
Installation NOTE The following procedures can be performed with the saddlebags on or off of the motorcycle, and the covers on or off of the saddlebags. Figures show saddlebag covers removed. 1. Open the saddlebags and remove all loose contents. 2. Thoroughly clean the left and right saddlebag covers, and let them dry completely. 3. See Figure 2 for your saddlebag material. Position a straightedge against the check strap mounting posts of one of the covers, and mark or scribe a guide line along the straightedge as shown. NOTE When applying the templates in the following steps, make sure the templates are aligned as instructed, and the respective “LEFTSIDE” or “RIGHTSIDE” lettering is clearly readable when applied to the applicable (left or right side) cover. The templates are designed to be easily removed from the first cover and re-applied to the remaining cover When applying the templates, ensure that each template is correctly positioned BEFORE drilling the first hole