Honda CRF230 And CRF150 Enduro Lighting Kit Installation


Filed Under (Honda) by admin on 02-12-2011

Control Switch Installation: Install the high/low/off switch on the left handlebar next to the grip. Do not tighten the screws too tight as the threads in the body of the switch can be stripped out. Zip-tie the switch wiring down along the bottom of the handlebar and over the front of the top triple-clamp. Wiring Harness Installation: Attach the plastic connector from the switch to its corresponding mate from the provided wiring harness. Route the harness back along the left side of the bike following the stock wiring harness to the area on top of the airbox. Make sure the key is in the off position before making these wiring connections. -Run the black wire with the ring terminal and the fused lead with the ring terminal down to the battery.