1990 TOYOTA PAINT CODES AND REFINISH FORMULA CODES

0

Filed Under (Toyota Manuals) by admin on 20-10-2011

download
Attached for your reference is a listing of all 1990 paint codes and refinish paint codes for five refinish paint manufacturers – BASF, DuPont, PPG Industries, Sherwin Williams and Sikkens. Please Note: All colors listed in bold are new for 1990. Colors listed as Pearl or Metallic (M) have a clearcoat top coat finish. Colors 042 (Pearl White), 049 (Pearl White) and 051 (Diamond White Pearl) are tricoats (three stage paints), consisting of a base color coat, pearl (mica) coat and a clearcoat. Sikkens paint formulas are not separately listed in this bulletin since their paint codes simply add the characters “TOY” to our color codes in their literature. For example: Toyota color code 8D8 (Light Blue Metallic) is identified by Sikkens as “TOY 8D8.” PLEASE CONTACT YOUR LOCAL PAINT REPRESENTATIVE FOR THE ACTUAL PAINT MIXING FORMULAS OR FOR ADDITIONAL ASSISTANCE FOR COLOR MATCHING

MOUNTAIN BIKE AIR SHOCK SET-UP AND TUNING GUIDE

0

Filed Under (Tips and Review) by admin on 01-12-2010

download
DETAILED SET-UP 2. Installing Air Pressure – Remove the air cap from the Schrader valve on the end of the shock body. Attach the pump to the Schrader valve. Some people damage their pumps by screwing them on too far. As soon as the gauge registers pressure, screw 1/2 turn more and pump to the desired level. Use the release button on the pump to reduce air pressure. The hiss you hear when unscrewing the pump is only the air from the pump and not from the shock! Likewise, when you install the pump again, you will also hear a hiss as air from the shock fills the pump and reduces the registered pressure you previously installed. All perfectly normal when pressurizing the shock! After removing the pump, be sure to reinstall the Schrader valve cap. If the shock does not dampen properly after pressurizing, the air pressure may have been lost during pump removal as a result of a worn pump fitting o-ring that needs replacement. Do not ride the bike until the shock is properly pressurized. 3. Main Air Spring Pressure Adjustments – Air Spring adjustments are made by inflating or deflating the main air spring chamber. Since your IFP air pressure adjustment (outlined above) also affects your starting spring force, you should always adjust your IFP pressure before adjusting the main air spring pressure. You can refer to the online Quick Start guide at: www.progressivesuspension.com/literature.html for accurate main air spring pressure and sag settings matched to your bike model and body