2006-2007 Honda TRX450R SR4 4 Stroke racing system INSTALLATION

0

Filed Under (Honda) by admin on 30-11-2011

download
Install Motoworks header pipe using stock nuts, finger tight at this point ( Fig 4) 2. Install Motoworks tailpipe with muffler using bolt and spacer supplied in kit on upper rear mount, use stock nut and bolt on lower mount finger tight at this point. (Fig 5 and 6) 3. Torque header pipe nuts to 1.0 kg-m ( 7.3 lb-ft ) 4. Torque tailpipe mounting bolts to 2.5 kg-m ( 18 lb-ft ) 5. Re-check all your work 6. We recommend that you clean the entire exhaust system with a mild detergent, i.e. glass cleaner prior to starting as any oily residue may cause permanent stainingBefore operating check for proper clearance between Motoworks exhaust and ATV i.e. frame, plastic, brake line, fuel line etc if problems exist re-check work

Kawasaki KFX 400 SR4 4 Stroke racing system INSTALLATION MANUAL

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Installation Motoworks exhaust 1. Install Motoworks tailpipe with muffler using bolt supplied in kit. (Fig 3) 2. Tighten tailpipe mounting bolt. 3. RECHECK ALL YOUR WORK 4. We recommend that you clean the entire exhaust system with a mild detergent, i. e. glass cleaner prior to starting as any oily residue may cause permanent staining. 5. Before operating check for proper clearance between Motoworks exhaust and ATV i. e. frame, plastic, brake line, fuel line etc. if problems exist, recheck work. Note: It is normal for the new exhaust to emit white smoke the first time you start the ATV. This is from the oil used during manufacturing.

Incoming search terms: