YAMAHA FJR 1300 2006 GPS-Halter INSTALLATION MANUAL

0

Filed Under (Yamaha) by admin on 10-01-2012

download
Mounting Instructions SW-MOTECH products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. SW Motech takes no responsibility for damages caused by improper installation. All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: All screws, bolts and nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite”) should be used to secure all screws, bolts and nuts. Alle vom Motorrad gelösten Schrauben sind gemäß Herstellerangaben wieder

HONDA VFR800, CBR1100XX Blackbird, ST 1300 Sport Brake Lever Part INSTALLATION

0

Filed Under (Honda) by admin on 02-11-2011

download
Congratulations on your purchase of an ASV C/5 Sport Streetbike lever. The correct installation of control
levers on a sport/street motorcycle is critical. Incorrect installation or the installation of an incorrect part
can result in a malfunction of your clutch and / or front brake system. This lever should be installed by a
certified mechanic; preferably at your local motorcycle dealer service dept. ASV Inventions, Inc. accepts no
liability for malfunctions as a result of incorrect installation or the installation of a part that was not
designed specifically for your motorcycle. Please check the list below to confirm that the correct year, make
and model of your motorcycle is listed. If the correct year, make and model of your motorcycle is not listed
below, then this part is not the correct part for your motorcycle and must not be installed onto your
motorcycle. ASV C/5 Sport front brake lever part number: BRC541 fits only the following motorcycles:
Please disregard any dashes or letters after this part number that are listed on the part number label of
this box that your lever came in, (ex; BRC541-SK) Any dashes or letters following your part number are for
colors and/or length of the lever and do not affect the application of the lever to the bike.

Incoming search terms:

APRILIA PEGASO 650 STRADA Assembling instructions

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Centre stand APRILIA PEGASO 650 STRADA Item-No.: 505.791 2 quantitem no. description 1 712.1002centre stand 2 151.124 bolt 17,7 x ø40 2 150.994 washer ø19 x ø30 x 2,7 4 150.995 washer ø8,4 x 3 2 150.841 hexagon bolt screw M 8 x 30 2 150.978 retaining pin 3,2 x 40 1 150.979 spring set Typ 5 1 275.001 limitation rubber The kit includes the following parts: Please check now the function of your centre stand and control all screw connections after the assembly for tightness! General: Centrestand cornering clearance: HEPCO & BECKER centerstands are carefully designed and tested to eliminate reductions in cornering clearance and ground clearance under most driving conditions on an unmodified stock motorcycle, and are certified to be compliant with European ABE safety standards. Use of any centrestand may reduce corning clearance or ground clearance under extreme driving situations. HEPCO & BECKER products should be installed by a qualified, experienced motorcycle technican. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. HEPCO & BECKER takes no resposibility for demages caused by improper installation. All screws, bolts, and nuts, including all replacement hard ware provided by HEPCO & BECKER, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: M 6 – 9,6 Nm M 8 – 23 Nm M 10 – 46 Nm All screws, bots und nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., „Locktite”

2009 NINJA 250R STREET Specifications

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
Your new Kawasaki motorcycle comes with a 12-month/unlimited mileage limited factory warranty. Read the next paragraph to find out how you can extend your coverage inexpensively, or ask your dealer for details about the factory warranty and available extended coverage. Up to Three Years Additional Coverage* Let Kawasaki protect your new machine for years to come* with the exclusive Good Times™ Protection Plan. This plan repairs or replaces most components free of charge if found defective in material or workmanship. Everything about the plan is easy: There’s no deductible. It’s honored at every authorized Kawasaki motorcycle dealer nationwide. It’s transferable to another owner with no fee. Just ask your dealer how you can buy additional coverage of 24 or 36 months depending on the model. Imagine, for just pennies a day, you can ride with no worry and no hassle. Just tell your dealer you want the Good Times Protection Plan. * Depending on the program purchased. Specifications subject to change without notice. Availability may be limited. Always wear a helmet and appropriate apparel. sAfe riDi Ng’s more fuN ride responsibly. kawasaki believes safety begins with us and continues with you. always wear a helmet, eye protection, and proper apparel. Passengers, too. ride defensively. if riding off-highway, use authorized areas only. obey the Basic speed law. Never ride under the influence of drugs or alcohol. riding is more fun on a well-maintained motorcycle… follow the instructions in your owner’s manual. remember, riding safe is smart. Action Photography: Professional riders on a closed course. ® p/N 99969-2307e printed in Canada To view our complete accessory catalogue, find your nearest dealer or take an in-depth tour of this machine visit: Specifications Ninja® 250R Engine type 4-stroke, liquid-cooled, DOHC, parallel twin Displacement 249cc Bore x stroke 62.0 x 41.2mm Compression ratio 11.6:1 Maximum torque 22 N-m @ 9,500 rpm (16.2 lb-ft @ 9,500 rpm) Fuel system Two Keihin CVK30 carburetors Cooling system Liquid Ignition Digital Starting Electric Transmission 6-speed Final drive Chain Frame type Semi-double cradle, high-tensile steel Rake/trail 26˚/83 m (3.2 inches) Suspension / front wheel travel 37mm hydraulic telescopic fork / 120 mm (4.7 in.) Suspension / rear wheel travel Bottom-Link UNI-TRAK® with 5-way adjustable preload / 130 mm (5.1 in.) Tire, front/rear 110/70-17; 130/70-17 Brakes, front Single 290mm hydraulic disc with two-piston caliper Brakes, rear Single 220mm petal disc with two-piston caliper Wheelbase 1400 mm (55.1 inches) Seat height 775 mm (30.5 inches) Length, width, height 2085 x 715 x 1110 mm (82.1 in / 28.1 in / 43.7 in) Fuel capacity 18 litres (4 gallons) Curb weight 170 kg (374.9 pounds) Colours Special Edition Lime Green or Candy Thunder Blue or Metallic Diablo Black or Sunbeam Red

Incoming search terms:

TRIUMPH Speed Triple Alu-Rack Mounting Instructions

0

Filed Under (Triumph) by admin on 30-10-2010

download
Montagehinweise Mounting Instructions Alu-Rack Alu-Rack SW-MOTECH GmbH & Co. KG Bahnhofstrasse 44d 35282 Rauschenberg -Germany- Tel.: ++ 49 (0) 6425 816 800 Fax: ++ 49 (0) 6425 816 810 www.sw-motech.com SW-MOTECH products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. SW-MOTECH takes no responsibility for damages caused by improper installation. All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: All screws, bolts and nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite”) should be used to secure all screws, bolts and nuts. Max. Load On Rear Carrier: 7,5 Kg (16,5 lbs) inclusive case and adapter or the motorcycle manufacturer’s weight limit, whichever is less

TRIUMPH Tiger 1050 Nonshock GPS-Halter Cockpit Mounting Instructions

0

Filed Under (Triumph) by admin on 30-10-2010

download
Mounting Instructions SW-MOTECH products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. SW Motech takes no responsibility for damages caused by improper installation. All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: All screws, bolts and nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite”) should be used to secure all screws, bolts and nuts. Alle vom Motorrad gelösten Schrauben sind gemäß Herstellerangaben wieder zu montieren, oder mit von SW- MOTECH gelieferten Schrauben zu ersetzen. Falls nicht anderweitig definiert, diese Schrauben nach Tabelle anziehen. Gegebenenfalls Schrauben mit flüssiger Schraubensicherung einkleben. Prüfen Sie nach 50 km alle Verbindungen auf festen Sitz. GPS.11.458.10000/B Revision: 00 SW-MOTECH GmbH & Co. KG Ernteweg 8/10 35282 Rauschenberg Germany Tel. +49 (0) 64 25/8 16 8-00 Fax +49 (0) 64 25/8 16 8-10 info@sw-motech.com www.sw-motech.com M5 5,5 Nm M6 9,6 Nm M8 23 Nm M5 5,5 Nm M6 9,6 Nm M8 23 Nm 6 GPS.00.085.003 Anzahl/ Pcs. 2 Verbindungsblech Connector Lug 5 GPS.00.085.006 Anzahl/ Pcs. 1 GPS-Trägerblech GPS-Bracket 01 00 10 GPS.00.085.004 Anzahl/ Pcs. 2 Fixierblech Fixing Lug 9 M5 x 16 DIN 7380 Anzahl/ Pcs. 4 Linsenkopfschrau be Lenshead Screw 2 M8 x 50 DIN 6912 Anzahl/ Pcs. 4 3 Unterlegscheibe Washe

Incoming search terms: