2004 Harley Davidson Micro Tach Tachometer Installation Instructions

0

Filed Under (Harley Davidson) by admin on 26-03-2012

download
Tachometer Installation Instructions for 2004+ Harley Davidson Sportster Custom Look for other model instructions online at www.speedwayinstruments.com Introduction: Installation of the Speedway Instruments microTach+ TM tachometer Tachometer requires some basic mechanical skills, including removing decorative covers, cutting protective tubing around wires, and using suitcase splice connectors to splice existing wiring harness. These actions may void your warranty, and if done incorrectly may cause damage to your motorcycle. Only you know your capabilities, if you do not feel capable of making modification please have a qualified motorcycle technician install it. Speedway Instruments, LLC is not responsible for damage to your motorcycle due to improper installation. These instructions utilize a 2004 Harley Davidson XL1200C motorcycle as basis for the all descriptions and pictures. Variations in location, color and procedure may be required for different year and make. Please refer to the Service manual to confirm the proper color and location of wires. Please make sure you have the proper service manual and tools before starting the installation. 1. Turn ignition off and disconnect Battery. 2. Determine a mounting position. Each motorcycle is unique and the microTach+TM tachometer is small enough to be placed in many different locations to provide an attractive appearance and vital engine status. Possible locations are: a. Front Brake Reservior b. Top handle bar clamp

Incoming search terms:

1999-2003 Harley Davidson TC88 Micro Tach TM Tachometer Installation Manual

0

Filed Under (Harley Davidson) by admin on 10-03-2012

download
Installation of the Speedway Instruments microTach+TM tachometer requires some basic mechanical skills, including removing decorative covers, cutting protective tubing around wires, and using suitcase splice connectors to splice existing wiring harness. These actions may void your warranty, and if done incorrectly may cause damage to your motorcycle. Only you know your capabilities, if you do not feel capable of making modification please have a qualified motorcycle technician install it. Speedway Instruments, LLC is not responsible for damage to your motorcycle due to improper installation. The microTach+ TM tachometer designed for 1999-2003 TC88 Harley Davidson motorcycles is designed to operate when connected to a dedicated Tachometer signal from the Electronic Ignition Controller. It is not intended to run off signals going to the ignition coil unless utilizing a Speedway Instruments Tach Adapter. WARNING: Damage may occur to the microTach+ TM tachometer or your motorcycle if micro Tach+ TM tachometer is connected directly to coil signals, you must use a Speedway Instruments tach Adapter (sold seperately) ! ! 1. Turn ignition off and disconnect Battery. 2. Determine a mounting position. Each motorcycle is unique and the microTach+TM tachometer is small enough to be placed in many different locations to provide an attractive appearance and vital engine status. Possible locations are: a. Front Brake Reservoir

Incoming search terms:

2008 ALU-RACK TRIUMPH Street Triple 675 Mounting Instruction

0

Filed Under (Triumph) by admin on 06-11-2010

download
experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. SW-MOTECH takes no responsibility for damages caused by improper installation. All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: All screws, bolts and nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite”) should be used to secure all screws, bolts and nuts

TRIUMPH Speed Triple Alu-Rack Mounting Instructions

0

Filed Under (Triumph) by admin on 30-10-2010

download
Montagehinweise Mounting Instructions Alu-Rack Alu-Rack SW-MOTECH GmbH & Co. KG Bahnhofstrasse 44d 35282 Rauschenberg -Germany- Tel.: ++ 49 (0) 6425 816 800 Fax: ++ 49 (0) 6425 816 810 www.sw-motech.com SW-MOTECH products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. SW-MOTECH takes no responsibility for damages caused by improper installation. All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: All screws, bolts and nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite”) should be used to secure all screws, bolts and nuts. Max. Load On Rear Carrier: 7,5 Kg (16,5 lbs) inclusive case and adapter or the motorcycle manufacturer’s weight limit, whichever is less

TRIUMPH Tiger 1050 Nonshock GPS-Halter Cockpit Mounting Instructions

0

Filed Under (Triumph) by admin on 30-10-2010

download
Mounting Instructions SW-MOTECH products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. SW Motech takes no responsibility for damages caused by improper installation. All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: All screws, bolts and nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite”) should be used to secure all screws, bolts and nuts. Alle vom Motorrad gelösten Schrauben sind gemäß Herstellerangaben wieder zu montieren, oder mit von SW- MOTECH gelieferten Schrauben zu ersetzen. Falls nicht anderweitig definiert, diese Schrauben nach Tabelle anziehen. Gegebenenfalls Schrauben mit flüssiger Schraubensicherung einkleben. Prüfen Sie nach 50 km alle Verbindungen auf festen Sitz. GPS.11.458.10000/B Revision: 00 SW-MOTECH GmbH & Co. KG Ernteweg 8/10 35282 Rauschenberg Germany Tel. +49 (0) 64 25/8 16 8-00 Fax +49 (0) 64 25/8 16 8-10 info@sw-motech.com www.sw-motech.com M5 5,5 Nm M6 9,6 Nm M8 23 Nm M5 5,5 Nm M6 9,6 Nm M8 23 Nm 6 GPS.00.085.003 Anzahl/ Pcs. 2 Verbindungsblech Connector Lug 5 GPS.00.085.006 Anzahl/ Pcs. 1 GPS-Trägerblech GPS-Bracket 01 00 10 GPS.00.085.004 Anzahl/ Pcs. 2 Fixierblech Fixing Lug 9 M5 x 16 DIN 7380 Anzahl/ Pcs. 4 Linsenkopfschrau be Lenshead Screw 2 M8 x 50 DIN 6912 Anzahl/ Pcs. 4 3 Unterlegscheibe Washe

Incoming search terms:

2009 Ducati 696 Fuel Controller Installation and Operation Manual

0

Filed Under (Ducati) by admin on 25-10-2010

download
this product fail to perform for either of the above reasons, two brothers racing will repair or replace it with an equivalent product at no charge, except for postage, to the original retail purchaser. to obtain the benefits of this warranty, the retail purchaser must return the product and proof of purchase to the place of original purchase. We recommend that this performance part be installed by a qualified motorcycle technician. If you have any doubts as to your ability to install this performance part, please consult with your local motorcycle dealer. Read all instructions first before starting installation. Make sure the vehicle and exhaust system are completely cool before starting the installation. Also, make sure the vehicle is secure during installation. Be sure to save all stock components for possible use later. The Juice Box™ is legal ONLY for closed course race vehicles. The Juice Box™ is not applicable, nor inteded for use on EMISSIONS CONTROLLED street, highway or off-road vehicles. The Juice Box™ is not applicable, nor inteded for use on aircraft. Thank *you*for*purchasing*a*genuine*Two*Brothers*Racing* JUICE*BOX™. **This*product*represents*a*radical*step* forward *in*tuning*fuel-injected*motorcycles*and*ATVs*for* optimal *performance*using*”load-based”*technology.** We *at*Two*Brothers*Racing*hope*that*you*will*find*this* development *as*exciting*and*useful*as*we*do. **And* remember: **Proper*Fuel*=*Maximum*Power! Make *sure*the*vehicle*is*completely*cool*before*starting* the *installation. *Also, *make*sure*the*vehicle*is*secure*and* will *not*roll*around. * Remove *the*seat*assembly. * Remove *the*fuel*tank*top*cover*screws. * (fig.1) Remove *fuel*tank*top*cover. * (fig.2) Remove *side*fuel*tank*covers. * (fig.3) Remove *fuel*tank*by*removing*lower*bolt*that*secures* tank *from*sliding*rear-ward. * (fig.4)

Incoming search terms: