2006 RIDGELINE MOTORCYCLE WHEEL GUIDE INSTALLATION And REMOVAL

0

Filed Under (Honda) by admin on 17-11-2011

download
Customer Information: The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures
should not be attempted by “do-it-yourselfers.” NOTE: • Be careful not to damage the body finish. • Determine the location of the wheel guide. One or more wheel guides can be installed in three different locations. 1. Remove the left front upper tie-down hook (two torx bolts). Remove the right front upper tie-down hook (two torx bolts). While wearing eye protection, enlarge the eight holes to 9 mm from the outer surface side of the front bed panel. Remove all burrs from the edges of the holes with a file.

Honda GL 500 Installation Manual

0

Filed Under (Honda) by admin on 21-11-2010

download
Wheel Alignment Wheel alignment is critical for proper tire wear and handling. With MiniTrike installed measure A and B . Loosen axle plates and align wheel so A and B are equal to within 1/16th of an inch. Tighten axle bolts and torque to 45 pounds. Repeat for C and D . It may be necessary to shim axle plates for proper alignment. NOTE : The measurement of A and B may not be the same as C and D. This is normal and presents no difficulty. Wheel Height / Traction Adjuster The wheel height/traction adjuster (right and left side) allows you to selectively adjust the position of your trike wheels in order to customize ride, handling, level, and traction characteristics. Your trike is shipped with the adjuster preset to an optimum position for your model of motorcycle however you can make whatever adjustments necessary to customize to your bike and personal preference. Shortening the adjuster arm raises the trike wheels and places more of the weight of your motorcycle on the motorcycle wheel. This increases motorcycle traction and gives a generally softer ride. 1) Loosen jam nuts 2) Shorten adjuster arm by turning adjuster nut A toward bolt C desired amount. 3) Turn adjuster nut B until it tightens against adjuster bracket and adjuster nut A 4) Tighten nuts A and B and jam nuts Lengthening the adjuster arm lowers the trike wheels and places more of the weight of your motorcycle on the trike wheels. This gives a firmer ride and increases handling/cornering. 1) Loosen jam nuts 2) Lengthen adjuster arm by turning adjuster nut B toward bolt D desired amount. 3) Turn adjuster nut A until it tightens against adjuster bracket and adjuster nut B 4) Tighten nuts A and B and jam nuts