2003-2004 Harley-Davidson V-Rod Power Commander Installation Instructions


Filed Under (Harley Davidson) by admin on 05-04-2012

1 Remove the seat, air box shell, and airbox cover. 2 Remove the left hand side cover by removing the 5mm allen bolt (Fig. A). Fig. A Fig. B Fig. C Remove this bolt Unplug the stock connector from the ECM Route harness from PCIII under frame rail PC connectors
5 Route the PCIII harness behind the stock wires (Fig. D). 6 Plug the connectors from the PCIII in line of the stock wiring harness and ECM (Fig E). 7 Tuck the two connectors in the lower right corner of the frame (Fig. F)