Kawasaki Versys Handlebar Riser Removal and Installation Instructions

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
1) Remove four plastic screw caps with a small screwdriver or by hand, and keep them for the future Create PDF files without this message by purchasing novaPDF printer Unscrew the four handlebar screws with the 6 mm Allen wrench, as shown 3) Place a towel on the tank area to protect it and pull back the handlebar assembly, as shown 4) Position the handlebar riser as shown, so the top holes are spread further apart than bottom ones Create PDF files without this message by purchasing novaPDF printer C MOTOWERK ™ 3 5) Insert the handlebar riser in between the two existing handlebar assembly parts as shown Create PDF files without this message by purchasing novaPDF printer Copyright Screw the two M-8 screws provided into the top holes with the 6 mm Allen wrench, as shown 7) Screw the two M-8 screws provided into the bottom holes with the 6 mm Allen wrench, as shown