Harley Davidson BoonDocker Nitrous System Installation MANUAL

0

Filed Under (Harley Davidson) by admin on 01-03-2012

download
BoonDocker Liquid Nitrous – 1589 Hollipark Dr. Idaho Falls, ID 83401 – (208) 542-4411 web site: www. boon dockers. com – email: info@boon dockers. com Revised 02-27-04 Page 2 of 10 This manifold is also designed to vary the float bowl pressure in relation to nitrous pressure, thus keeping the nitrous and fuel delivery in sync. Fluctuations in bottle temperature greatly affect nitrous pressure, which affects nitrous delivery. By automatically adjusting the fuel delivery as nitrous pressure varies, this manifold makes nitrous safe, reliable, and easy to use. Be sure to understand and follow the tuning instructions at the end of these instructions. Proper tuning is an important part of any performance-enhancing product. Part I – Bottle Installation A. Bottle Valve Fittings Insert the 4AN x 1/8″ NPT fitting and the 1/8″ NPT Plug into the bottle valve (these are attached to the lid of the box for the bottle) . Use Teflon tape to seal the threads – be sure not to get tape inside the threads! B. Bottle Mounting Position With nitrous in the bottle, both nitrous liquid and nitrous gas are present under high pressure (760 psi at 70 deg F) . Due to gravity and acceleration forces, the liquid portion of the nitrous will be at the bottom and rearward parts of the bottle. For this nitrous system to work properly, it is important that nitrous liquid be drawn from the bottle. Nitrous vapor will cause a significant decrease in performance. For best results, the bottle should be mounted so the valve is pointed down and towards the back of the vehicle as shown below. ************** *************** ******** ********* *************** (can be installed on top or bottom of air boot) ********** ********* push-button switch (mounts on handlebar) +12 V *********** ************ **** ****** *! “**#$******%* *! “**#$*#*%* 20 deg to 90 Front of motorcycle Rear of motorcycle BoonDocker Liquid Nitrous – 1589 Hollipark Dr. Idaho Falls, ID 83401 – (208) 542-4411 web site: www. boon dockers. com – email: info@boon dockers. com Revised 02-27-04 Page 3 of 10 Bottle mounted inside airbox: For some applications, a small bottle can be mounted inside the airbox as shown. Note: because of the restricted space, it was necessary to mount this bottle at a non-optimal angle (the valve is pointed towards the front instead of the rear)

Incoming search terms:

HONDA CT 70 Owner's Manual

0

Filed Under (Honda) by admin on 23-04-2011

download
INSTRUMENT AND INIHCATOH LAMP Speedometer I) is located on the headlight case and odometer 2′. incorporated in the speedometer indicates total distance travelled. Gear speed range indicators l’_§t‘- are Curved bare shown on the Epeeciometer dial plate to indicate the recommended operating range of the respective gears. High beam indicator lamp tredi i is located at the right side of the speedometer. This lamp will he on when headlight is on high beam. mph
‘.1_ Speedometer -fgi Odometer -Ffij Gear speed r.|nge indicators L @ High boom indicator lamp I “5′ Page 13 I  ELECTRICAL CONTRUIB I lGilTIUi’~l SWIICH The ignition switch is located on the left side of the main pipe. Functions of the respective 5″.’t'lt’C|’t positions are shuvvn in the chart helovv. t lgtttttttn sti, |tch Kev position I unction ii] OFF Slfitigiertzttrical circuit I5 opened, engine ‘t.’t.’||| not I3. Electrical circttit is closed, engine can be started {for day time operattioni 4 Eiectrical circuit is closed, engine can be “-3 started {for night time operation? Key removal Key can be
removecl Kev can not be removed Kev can not he removed age 14 10 0 HEADLILIHT BEAM CDH’TROL SWITCH The headlight beam control switch {D is located on the left handle grip. “L” is low beam position llow beam light and tail light on]. “H” is high beam light and tail light on. The headlight will only operate when the ignition switch is in the on posi- tion. Reler to ignition switch page 9.eat “$2, i 1| ma‘ ‘ aw Lg; Headlight beam contxul switclr -”‘ @ “I.” position {ii “ll” position , ._ _. i HORN BUTTON This is a push button switch Q) to-zated on the right handte grip. When the horn button switch is depressed the horn wlll operate

BMW R 1200 RT-P Supplementary Instructions

0

Filed Under (BMW) by admin on 26-10-2010

download
Switch Layout – Left The left handlebar switch contains the standard operating controls for the police motor. The horn switch also operates the siren air horn when the ignition is turned “On”. A supplementary switch holder is standard, containing two switch blank plugs A & B. These locations are reserved for options such as Cruise Lights, Radio Rebroadcast, Radio Speaker “off” or other desired optional rocker switches. Siren Switch: The BMW/Code 3 siren is operated by one momentary push button switch, but only when the ignition is “on”. Pressing the button engages the siren into wail tone. Each subsequent press of the button advances to yelp, then hyper-yelp, then back to wail (California models only have wail and yelp). Press and hold to turn-off siren at any time. The siren has been programmed to accept a push of the button similar to clicking a computer mouse. This was done to avoid accidentally activating siren by nudging the button. A quick, clean press or “poke” of the button provides crisp activation. Switch Layout – Right The right handlebar switch contains the standard operating controls for the police motor including starter button. However, the additional switch functions are as follows: (A) Emergency Lights: This three-position switch controls the switching power to all emergency lights. Rocking the switch down to the middle position engages rear channel for the emergency lights (remember switch (C) must be down), rocking switch (A) down further engages front and rear channels – all emergency lights (adding front and side lights). With the switch in this position, rocking switch (C) up will cancel rear lights, but keep front and side lights operating. An LED indicator display can be seen through the back of the right front LED emergency light housing, showing whether the rear or front and rear emergency light channels are switched “on

Incoming search terms: