TOYOTA SPECIALTY AND REPLACEMENT PARTS

0

Filed Under (Toyota Manuals) by admin on 30-09-2011

download
73-3844 Replaces: 3977775, 3078511 CLIP -HOOD INSULATION Head Dia.: 2″ Length: 3/4″ G.M. ’64/ UNIT PACKAGE 100 79-5126 Replaces: 20064875 CLIP -HOOD INSULATION Head Dia.: 1 21/32″ Length: 3/4″ G.M. ’78/ UNIT PACKAGE 50 79-5127 Replaces: 20030401 CLIP -HOOD INSULATION Head Dia.: 1 3/8″ Length: 1″ G.M. ’80/ UNIT PACKAGE 50 79-5100 Replaces: 388908-S RETAINER -HOOD INSULATION Head Dia.: 1-3/4″ Ford ’80/ UNIT PACKAGE 100 74-3945 Replaces: 385330-S, 6003351 FASTENER -HOOD INSULATION Ford & Chrysler Products ’73/ AMC 4005513 ’76 UNIT PACKAGE 100 92-7067 Replaces: 15678493, 21039141 RETAINER -HOOD INSULATION Head Dia.: 1-9/16″ Length: 1/2″, Hole: 1/4″ Plastic Saturn ’91/ UNIT PACKAGE 25 67-3119 Replaces: 389809, C6GY-16776-A CLIP -HOOD INSULATION RETAINER 1-1/2″ x 1-1/2″ Plastic G.M., Ford Products UNIT PACKAGE 50 72-3718 Replaces: 389089 FASTENER -HOOD INSULATION 2″ x 2″ Plastic G.M. Cars UNIT PACKAGE 50 99-8032 Replaces: 385595-S, 386553-S RETAINER -HOOD INSULATION Plastic Formerly 74-3944 For Heavier Type Insulation Head: 1-3/16 Ford ’74/ UNIT PACKAGE 50 95-7382 Replaces: N-803613-S RETAINER -HOOD INSULATION Hole: 1/4″, Head: 1-3/4″ Stem Length: 7/8″ Plastic Ford Explorer ’91/, Taurus, Sable, Mustang, Continental ’92/ UNIT PACKAGE 50 95-7369 Replaces: W700671-S300 RETAINER -HOOD INSULATION Head Dia.: 25MM, Hole: 8MM Black Plastic Ford Contour & Mercury Mystique ’95/ UNIT PACKAGE 15 96-7577 Replaces: 01644290, 15678979, 01553-0075U RETAINER -SPEAKER, DOOR SILL, BUMPER, HOOD INSULATOR Black Plastic Hole: M6, Barb Length: 12MM Head Dia.: 11MM, O/L: 19MM G.M. Various Models ’86/, Nissan Altima & Maxima 2002/

Incoming search terms:

YAMAHA XVS 650AK (C) SERVICE MANUAL

0

Filed Under (Yamaha) by admin on 26-04-2011

download
IMPORTANT INFORMATION N 300-008 300-016 EB101000 IMPORTANT INFORMATION PREPARATION FOR REMOVAL PROCEDURES 1.Remove all dirt, mud, dust and foreign material before removal and disassembly. 2.Use proper tools and cleaning equipment. Refer to the “SPEClAL TOOLS” section. 3.When disassembling the machine, always keep mated parts together. This includes gears, cylinders, pistons and other parts that have been “mated” through normal wear. Mated parts must always be reused or replaced as an assembly. 4.During machine disassembly, clean all parts and place them in trays in the order of disassembly. This will speed up assem~ bly and allow for the correct installation of all parts. 5.Keep all parts away f REPLACEMENT PARTS 1.Use only genuine Yamaha parts for all replacements. Use oil and grease recom- mended by Yamaha for all lubrication jobs. Other brands may be similar in function and appearance, but inferior in quality. E8101020 GASKETS, OIL SEALS AND O-RINGS 1.Replace all gaskets, seals and O-rings when overhauling the engine. All gasket surfaces, oil seal lips and O-rings must be cleaned. 2.Properly oil all mating parts and bearings during reassembly. Apply grease to the oil seal lips. Page 18 IMPORTANT INFORMATION I 1 T33? WASHERS/PLATES AND COTTER PINS BEARINGS AND OIL SEALS 1.lnstall bearings and oil seals so that the manufacturer’s marks or numbers are visible. When installing oil seals, apply a light coating of  lightweight lithium base grease to the seal lips. Oil bearings liberally when installing, if appropriate. (D Oil seal Do not use compressed air to spin the bear ings dry. This will damage the bearing sur faces. (D Bearing

2002 YAMAHA BT 1100 SERVICE MANUAL

0

Filed Under (Yamaha) by admin on 29-11-2010

download
1. Remove all dirt, mud, dust and foreign material before removal and disassembly. 2. Use proper tools and cleaning equipment. Refer to the “SPECIALTOOLS” section. 3. When disassembling the machine, always keep mated parts together. This includes gears, cylinders, pistons and other parts that have been “mated” through normal wear. Mated parts must always be reused or replaced as an assembly. 4. During machine disassembly, clean all parts and place them in trays in the order of disassembly. This will speed up assembly and allow for the correct installation of all parts. 5. Keep all parts away from any source of fire. EB101010 REPLACEMENT PARTS 1. Use only genuine Yamaha parts for all replacements. Use oil and grease recommended by Yamaha for all lubrication jobs. Other brands may be similar in function and appearance, but inferior in quality. EB101020 GASKETS, OIL SEALS AND O-RINGS 1. Replace all gaskets, seals and O-rings when overhauling the engine. All gasket surfaces, oil seal lips and O-rings must be cleaned. 2. Properly oil all mating parts and bearings during reassembly. Apply grease to the oil seal lips.
GEN INFO IMPORTANT INFORMATION 1-3 EB101030 LOCK WASHERS/PLATES AND COTTER PINS 1. Replace all lock washers/plates 1and cotter pins after removal. Bend lock tabs along the bolt or nut flats after the bolt or nut has been tightened to specification. EB101040 BEARINGS AND OIL SEALS 1. Install bearings and oil seals so that the manufacturer’s marks or numbers are visible. When installing oil seals, apply a light coating of lightweight lithium base grease to the seal lips. Oil bearings liberally when installing, if appropriate. 1Oil seal Do not use compressed air to spin the bearings dry. This will damage the bearing sur- faces. 1Bearing CAUTION: EB101050 CIRCLIPS 1. Check all circlips carefully before reassembly. Always replace piston pin clips after one use. Replace distorted circlips. When installing a circlip 1, make sure that the sharp-edged corner 2is positioned opposite the thrust 3 it receives. See sectional view

YAMAHA YW50X SERVICE MANUAL

0

Filed Under (Yamaha) by admin on 25-11-2010

download
1. Before removal and disassembly, remove all dirt, mud, dust and foreign material. 2. Use only the proper tools and cleaning equipment. Refer to the “SPECIAL TOOLS”. 3. When disassembling, always keep mated parts together. This includes gears, cylinders, pistons and other parts that have been “mated” through normal wear. Mated parts must always be reused or replaced as an assembly. 4. During disassembly, clean all of the parts and place them in trays in the order of disassembly. This will speed up assembly and allow for the correct installation of all parts. 5. Keep all parts away from any source of fire. EAS00021 REPLACEMENT PARTS Use only genuine Yamaha parts for all replacements. Use oil and grease recommended by Yamaha for all lubrication jobs. Other brands may be similar in function and appearance, but inferior in quality. EAS00022 GASKETS, OIL SEALS AND O-RINGS 1. When overhauling the engine, replace all gaskets, seals and O-rings. All gasket surfaces, oil seal lips and O-rings must be cleaned. 2. During reassembly, properly oil all mating parts and bearings and lubricate the oil seal lips with grease.
1-3 GEN INFO IMPORTANT INFORMATION EAS00023 LOCK WASHERS/PLATES AND COTTER PINS After removal, replace all lock washers/plates 1 and cotter pins. After the bolt or nut has been tightened to specification, bend the lock tabs along a flat of the bolt or nut. EAS00024 BEARINGS AND OIL SEALS Install bearings and oil seals so that the manufacturer’s marks or numbers are visible. When installing oil seals, lubricate the oil seal lips with a light coat of lithium-soap-based grease. Oil bearings liberally when installing, if appropriate. 1 Oil seal c C Do not spin the bearing with compressed air because this will damage the bearing surfaces. 1 Bearing

SUZUKI GSX-R1000 SERVICE MANUAL

0

Filed Under (Suzuki) by admin on 12-11-2010

download
Cover the throttle bodies to prevent anything from dropping into the engine. 1. Remove the front seat and disconnect the battery. (Refer to Service Manual, Page 8-8) 2. Lift up the fuel tank. (Refer to Service Manual, Page 5-3) 3. Remove the air cleaner box. (Refer to Service Manual, Page 5-14) 4. Remove and replace the ISC valve. (Refer to Service Manual, Page 5-25) NOTE: Since the ECM is also being replaced there is no need to perform the ISC valve preset operation. 5. Install the air cleaner box in reverse order of removal. (Refer to Service Manual, Page 5-14) 6. Lower the fuel tank. (Refer to Service Manual, Page 5-3) 7. Remove the upper seat rail plate. Disconnect and remove the ECM. (Figure 1) @ ISC Valve Mounting Screw Torque: 2.1± ±0.6 N.m (1.5± ±0.4 lb-ft) ! Carefully insert the ISC valve straight into the throttle body hole to prevent damaging the o-ring. Turn the ISC valve slightly to confirm that the o-ring has not twisted. Using the new screw provided in the replacement parts kit, make sure the screw is completely seated on the plate after the screw has been tightened to the specified torque. 4. Remove and replace the ISC valve. (Refer to Service Manual, Page 5-25) NOTE: Since the ECM is also being replaced there is no need to perform the ISC valve preset operation. ! Cover the throttle bodies to prevent anything from dropping into the engine. 1. Remove the front seat and disconnect the battery. (Refer to Service Manual, Page 8-8) 2. Lift up the fuel tank. (Refer to Service Manual, Page 5-3) 3. Remove the air cleaner box. (Refer to Service Manual, Page 5-14) REPLACEMENT PROCEDURE: 8. Install the new ECM in reverse order of removal. Apply thread lock to the upper plate mounting bolts when reinstalling the upper seat rail plate.

Incoming search terms:

Harley Davidson V-Rod SUPERCHARGER KIT Installation Manual

0

Filed Under (Harley Davidson) by admin on 24-10-2010

download
Your Sprintex® Supercharger Installation can only be carried out by an Authorised Sprintex® Approved Supercharger Specialist. No unauthorised service or alteration may be undertaken to the Sprintex Supercharger kit or standard motorcycle Specification. Any modification or alterations from the Sprintex or Harley-Davidson specification shall affect your Warranty. 2. FUEL SPECIFICATIONS V ROD® Minimum 95RON Premium Unleaded Fuel 3. SUPERCHARGER BELT AND PULLEY Must be inspected at every routine service and the belt replaced when required. 4. OIL SPECIFICATION (ENGINE ONLY) Harley-Davidson Type Viscosity Harley-Davidson Rating Lowest Ambient Temperature Cold Weather Starts Below 50F (10C) HD Multigrade SAE10W40 HD360 Below 40°F (4°C) Excellent HD Multigrade SAE20W50 HD360 Above 40°F (4°C) Good 5. SPRINTEX V ROD SUPERCHARGER The Sprintex V Rod® Supercharger warranty provides a guarantee against any manufacturing defect during the warranty period, 12 months from the date of purchase or 20,000 Kms, whichever occurs first. The warranty guarantees the replacement of any parts of the Supercharger Installation which fail as a result of a manufacturing defect in normal operating conditions and excludes circuit racing, speed trials, drag racing and any form of motor sport activities. In addition, any unauthorised alteration to the motorcycles original specification or failure to meet the approved service requirements will affect your warranty. 6. EXCLUSIONS The following items will void your Sprintex Warranty: a. Alteration from standard specification b. Unauthorised Service or repair works c. Fitting of non Sprintex approved replacement parts d. Use of non standard air filter e. Installation by any non Approved Sprintex Agent

Incoming search terms:

Incoming search terms: