2007 Honda CBR600RR Power Commander Installation Instructions


Filed Under (Honda) by admin on 16-11-2011

Remove the bolt that holds the ground wires and bracket for the alternator connectors to the frame on the left hand side of the bike. This allows access to the Throttle Position Sensor connector. Unplug the stock wiring harness from the Throttle Position Sensor (Fig. F).Remove the main seat and the passenger seat. Remove the fuel tank cover. Remove the left hand fairing. Prop the fuel tank up. Lay the PCIII in the tail section temporarily and route the harness underneath the tail sec- tion (Fig. A). Removing the 4 bolts that hold the tail sectionb in place will make this easier Route the harness towards the throttle bodies (Fig. B) Attach the ground wire from the PCIII to the negative side of the battery.