POLINI XP 65 R USE AND MAINTENANCE MANUAL

0

Filed Under (Polini) by admin on 24-11-2010

download
The following instructions give the most practical order for assembling the various parts of your motorcycle. 1- Remove the motorcycle from the crate (photo 1). 2- Remove all the parts needed to reassemble the motorcycle from the crate and check them thoroughly (photo 2). WASHER 6X18X1 No. 4 PLASTIC TIE No. 1 FRONT WHEEL SPINDLE No. 1 WHEEL SPINDLE SPACER No. 1 M12 WHEEL SPINDLE NUT No. 1 FOOTREST SPRING No. 2 TCEI SCREW M8X40 No. 2 TB SCREW M6X16 No. 4 TBEI SCREW M6X40 No. 1 NUMBER PLATE No. 1 NUMBER PLATE SPACER No. 1 RIGHT FOOTREST No. 1 LEFT FOOT REST No. 1 M8 SELF-LOCKING NUT No. 2 TCEI SCREW M8X75 No. 4 HANDLEBAR CLAMP No. 2 HANDLEBAR CLAMP SPACER No. 4 HANDLEBAR WITH FOAM ROLLNo. 1 FRONT WHEEL WITH DISK No. 1 FRONT MUDGUARD No. 1 3- Fit the rear shock-absorber, using the M10 hexagonal head screw and the two washers with the M10 nut. Fit one of the washers at the bolt side and the other at the nut side. The nut, bolt, spacers and washers have been pre-fitted in their seats on the swinging arm (photos 3). 4- Open the front brake disk pads. 5- Fit the front wheel using the special spindle; fit the spacer on the disk side of the wheel 6- Insert the spindle and the nut and tighten with a torque wrench (See section 6.2 ) (photo n.4). 1 2 3 XP65R_instructions.qxd 5-09-2007 10:45 Pagina 3
7- Tighten the spindle locking bolt with a torque wrench (See section 6.2 ) (photo 5). 8- Inflate the front and rear tyres (See section 4.12 ). 9- Fit the front mudguard with the provided 4 screws and the TBM6X16 washers (photo 6). 10- Cut the transport tie securing the front brake master cylinder. Fit the handlebar and fix it to the top fork with the two handlebar clamps and the four Allen bolts M8X75 (See section 6.2 ) (photo 7). 11- Regulate the front fork height as per photo No. 8 (see section 6.2 for tightening torque) ATTENTION! For safety reasons the front fork must be extracted within notch No. 4 (minimum) and No. 5 (maximum) (photo No. 8). 12- Remove the throttle control cover and fit the cable as shown in photo 9. Re-fit the cover. (See section 4.9 ). 13- Fit the front brake lever and secure the clamp with the provided screws 14- Fit the engine stop button and fix it to the handlebar with its mounting clamp 15- Fit the clutch lever and adjust the travel of the lever as you prefer using the regulator (photo 10) (See section 4.11 ). Fit the number plate fixing it with the related spacers and screw TBEI M6X40 and insert the front brake cable in the slide. 16- Fit the footrests (photo 11) 17- Fill the engine coolant circuit (See sections 4.5 and 4.6 ) (photo 12)

Incoming search terms:

KTM 990 SUPER DUKE 950 SUPERMOTO 950 SUPER ENDURO REPAIR MANUAL

0

Filed Under (KTM) by admin on 22-11-2010

download
Adjusting the position of the compression and rebound damping Rebound damping: -Turn in the adjusting screw 1 in a clockwise direction all the way to the stop. -Turn back the respective number of clicks in a counterclockwise direction. Compression damping, low speed: -Turn in the adjusting screw 2 in a clockwise direction all the way to the stop. -Turn back the respective number of clicks in a counterclockwise direction. Compression damping, high speed: -Turn in the adjusting screw 3 in a clockwise direction all the way to the stop. -Turn back the respective number of clicks in a counterclockwise direction. Adjusting the spring preload NOTE: the spring preload is the difference between the unloaded and preloaded length of the spring. -Tighten the adjusting nut 4 with the special tool T106 until you have the prescribed spring preload. -Tighten the lock screw on the adjusting nut Disassembling the shock absorber -Write down the spring preload. -Write down the rebound and compression damping settings, counting the clicks or number of turns while turning in a clockwise direction. -Unscrew all of the adjusting screws in a counterclockwise direction. -Clamp the upper part of the shock absorber in a vise as shown in the photo, using protective jaws. -Loosen the lock screw 1 (AH 4 mm), loosen the adjusting nut 2 using the special tool T106 3 and relieve the spring. NOTE: mark the position of the lock screw. -Press the spring down with the special tool T101S and pull out the spring retainer 4 . -Remove the washers 5 and spring 6 . 4-2 Repair manual WP Shock absorber 990 Super Duke, 950 Supermoto, 950

Incoming search terms:

YAMAHA TW125 SERVICE MANUAL

0

Filed Under (Yamaha) by admin on 19-11-2010

download
Dimensions: Overall length Overall width Overall height Seat height Wheelbase Minimum ground clearance Minimum turning radius 2,140 mm , 810 mm 1,120 mm , 805 mm 1,330 mm , 260 mm 2,100 mm Basic weight: With oil and full fuel tank 125 kg Engine: Engine type Cylinder arrangement Displacement Bore stroke Compression ratio Compression pressure (STD) Starting system Lubrication system: Air-cooled 4-stroke, SOHC Forward-inclined single cylinder 0.124 L (124 cm3) 57.0 48.8 mm 10.0 : 1 1,200 kPa (12.0 kg/cm2, 12.0 bar) at 1,000 r/min Electric starter Wet sump Oil type or grade: Engine oil API standard: “SE” or higher grade ACEA standard: G4 or G5 Periodic oil change With oil filter replacement Total amount 1.0 L 1.1 L 1.3 L Air filter: Wet type element Fuel: Type Fuel tank capacity Fuel reserve capacity Regular unleaded gasoline 7.0 L 1.0 L 2-2 GENERAL SPECIFICATIONS SPEC Model TW125 Carburetor: Type/quantity Manufacturer Y24P/1 TEIKEI Spark plug: Type Manufacturer Spark plug gap DR8EA NGK 0.6 0.7 mm Clutch type: Wet, multiple-disc Transmission: Primary reduction system Primary reduction ratio Secondary reduction system Secondary reduction ratio Transmission type Operation Gear ratio 1st 2nd 3rd 4th 5th Spur gear 74/20 (3.700) Chain drive 50/14 (3.571) Constant mesh 5 speed Left foot operation 36/16 (2.250) 31/21 (1.476) 27/24 (1.125) 25/27 (0.926) 23/29 (0.793) Brake: Front brake type operation Rear brake type operation Single disc brake Right hand operation Drum brake Right foot operation Suspension: Front suspension Rear suspension Telescopic fork Swingarm (Monocross) Shock absorber: Front shock absorber Rear shock absorber Coil spring/Oil damper Coil gas spring/Oil damper Wheel travel: Front wheel travel Rear wheel travel 160 mm 150 mm Electrical: Ignition system Generator system Battery type Battery capacity C.D.I. C.D.I. magneto GM 7CZ-3D 12 V 7 AH Headlight type: Bulb type Bulb wattage quantity:

Incoming search terms:

Victory vision ENGINE SPECIFICATION

0

Filed Under (Victory) by admin on 13-11-2010

download
Type: Air/oil-cooled SOHC 4-valve-per- cylinder 50° V-twin 4-stroke Displacement: 1731cc Compression ratio: 9.4:1 Bore x stroke: 101 x 102mm Starting system: Electric Engine management: Electronic ignition Fuel system: Electronic fuel injection with 45mm throttle bodies Clutch: Wet multiplate Transmission: 6-speed Final drive: Belt FRAME Type: Tubular steel Swingarm: Aluminium Front suspension: Conventional 43mm dia. telescopic fork Rear suspension: Linkage-type w/single gas-charged shock absorber, air adjustable Brakes: Linked system comprising twin 300mm rotor floating discs with 3-piston calipers up front & single 300mm floating rotor with 2-piston caliper rear Wheels: Cast aluminium 18 x 3.0 in. front & 16 x 5.0 in. rear Tyres: Dunlop Elite 130/70R18 front & 180/60R16 rear DIMENSIONS Wheelbase: 1670mm Rake/Trail: 29°/137mm Seat height: 673mm Dry weight: 365kg Fuel tank capacity: 22.7The engine is reasonably quiet and remarkably smooth in cruise mode. It has the lovely pulse that a massive V-twin develops when you gas it up, but on cruise it takes a conscious effort to find even the slightest tick from the donk. I was incredulous at times. The range on a tankful varied with how sportily I pushed the bike along, but it was about ‘big tourer’ standard. It rides harder than you might expect; it’s an enjoyable bike to toss around too. Stopping is taken care of by a set of three 300mm discs, twin floating rotors with three-piston calipers up front and one two-piston unit aft. They are linked, provided good feel and were confidence

Incoming search terms:

VESPA GTS SUPER SPORT 300 Technical specification

0

Filed Under (Vespa) by admin on 11-11-2010

download
Engine Single-cylinder, catalysed, QUASAR 4 stroke, 4 valve electronic injection Capacity 278cc Power 16.4 Kw / 7500 rpm Max Torque 22Nm / 6500 rpm Cooling Liquid Starter Electric Transmission Automatic Twist and Go Front Suspension Single arm, dual chamber hydraulic shock absorber with coaxial spring Rear Suspension Two dual effect shock absorbers with adjustable preload Front Brake ø 220mm disc brake Rear Brake ø 220mm disc brake Front Tyre Tubeless 120/70-12″ Rear Tyre Tubeless 130/70-12″ Running weight 158kg Length/Width/Height 2230mm / 755mm / 1170mm Fuel Tank Capacity 9 litres Emissions Euro 3 Accessories • Flyscreen (clear or tinted) • Windscreen • 42 litre Top Box Kit • Chrome Front & Rear Rack • Chrome Bumper Guard • Chrome Rear Side Protection • Alarm, Chain Lock, Vehicle Cover, Leg Cover Colours Grigio Titanio

Incoming search terms:

Vespa GTS Super Specification

0

Filed Under (Vespa) by admin on 11-11-2010

download
Gts super 300 ie Gts super 125 ie s 125cc s 50cc Gts 250 ie Gts 125cc LX 125cc LX 50cc 2 stroke Engine Single-cylinder, catalised, QUASAR 4 stroke, 4 valve electronic injection Single-cylinder LEADER 4 stroke with electronic injection Single-cylinder LEADER 4 stroke Single-cylinder HI-PER 2 stroke Single-cylinder, catalised, QUASAR 4 stroke, 4 valve electronic injection Single-cylinder, catalised, LEADER 4 stroke, 4 valve Single-cylinder LEADER 4 stroke Single-cylinder HI-PER 2 stroke Capacity 278cc 124cc 124cc 50cc 249cc 124cc 124cc 49cc Power 16.4 kW / 7500 rpm 10.5 Kw / 9500 rpm 7.65 Kw / 8250 rpm 3.2 Kw / 7500 rpm 15.7 Kw / 8500 rpm 7.65 Kw / 8250 rpm 7.65 Kw / 8250 rpm 2.5 Kw / 8500 rpm Max Torque 22Nm / 6500 rpm 12 Nm / 8000rpm 9.6 Nm / 7250 rpm 4.4 Nm / 6500 rpm 20.1 Nm / 6500 rpm 9.6 Nm / 7250 rpm 9.6 Nm / 7250 rpm 3.3 Nm / 6500 rpm Cooling Liquid Liquid Forced Air Forced Air Liquid Liquid Forced Air Forced Air Starter Electric Electric Electric and kick starter Electric and kick starter Electric Electric Electric and kick starter Electric and kick starter Transmission Automatic twist and go Automatic twist and go Automatic twist and go Automatic twist and go Automatic twist and go Automatic twist and go Automatic twist and go Automatic twist and go Front Suspension Single arm, dual chamber hydraulic shock absorber with coaxial spring Single arm link with coil spring and double hydraulic shock absorber Single arm link with coil spring and double hydraulic shock absorber Single arm link with coil spring and double hydraulic shock absorber Single sided trailing link with hydraulic shock absorber Single sided trailing link with hydraulic shock absorber Single sided trailing link with hydraulic shock absorber Single sided trailing link with hydraulic shock absorber Rear Suspension Two dual effect shock absorbers with adjustable preload Coil spring and double hydraulic shock absorber Coil spring and double hydraulic shock absorber Coil spring and double hydraulic shock absorber Twin hydraulic shock absorbers with preload adjuster Twin hydraulic shock absorbers with preload adjuster Hydraulic shock absorbers with preload adjuster Hydraulic shock absorber Front Brake ø 220mm disc brake 220mm disc brake ø 200mm disc brake ø 200mm disc brake ø 220mm disc brake ø 220mm disc brake ø 200mm disc brake ø 200mm disc brake Rear Brake ø 220mm disc brake 220mm disc brake ø 110mm drum brake ø 110mm drum brake ø 220mm disc brake ø 220mm disc brake ø 110mm drum brake ø 110mm drum brake Front Tyre Tubeless 120/70-12″ Tubeless 120/70 – 12″ Tubeless 110/70 – 11″ Tubeless 110/70 – 11″ Tubeless 120/70-12″ Tubeless 120/70-12″ Tubeless 110/70 – 11″ Tubeless 110/70-11″ Rear Tyre Tubeless 130/70-12″ Tubeless 130/70 – 12″ Tubeless 120/70 – 10″ Tubeless 120/70 – 10″ Tubeless 130/70-12″ Tubeless 130/70-12″ Tubeless 120/70 – 10″ Tubeless 120/70-10″ Running weight 158kg 158kg 114kg 96kg 151kg 145kg 114kg 96kg Length/Width/Height 2230mm / 755mm / 1170mm 1930mm / 755mm / 1930mm 1770mm / 740mm / 1140mm 1755mm / 740mm / 1140mm 1930mm / 755mm / 1170 mm 1940mm / 755mm / 1180 mm 1770mm / 740mm / 1140mm 1755mm / 740mm / 1140mm Fuel Tank Capacity 9 litres 9 litres 8.5 litres 8.5 litres 9.2 litres 10 litres 8.5 litres 8.5 litres Emmissions Euro 3 Euro 3 Euro 3 Euro 2 Euro 3 Euro 3 Euro 3 Euro 2 Colours Rosso Dragon Nero Lucido Montebianco Rosso Dragon Nero Lucido Montebianco Taormina Nero Lucido Montebianco Taormina Nero Lucido Montebianco Marrone Terra Di Toscana Bronzo Perseo Nero Vulcano Blu Midnight

Incoming search terms:

Ural Motorcycle Repair Manual

0

Filed Under (Ural) by admin on 11-11-2010

download
FLUID CAPACITIES TOURIST & -10 Models Sportsman Solo Gasoline tank 19 L / 5 Gal 19L / 5 Gal 18.5 L / 4.9 Gal Reserve 2L / 0.5 gal 2L / 0.5 gal 2L- / 0.5 Gal Engine crankcase 2 L / 2 qt. + 3.6 oz. 2.0L / 2.11 qt 2 L / 2 qt. + 3.6 oz. Gearbox 0.9L / 1 qt 0.9L / 1 qt 0.9L / 1 qt Final drive 110 ml / 3.85 oz. 150 ml / 5.25 oz. 110 ml / 3.85 oz. Telescopic Forks (-10 & solo models) N/A on Tourist N/A on Sportsman 135 ml / 4.56 oz. Shock Absorbers 105 ml / 3.55 105 ml / 3.55 oz 105 ml / 3.55 oz
RUNNING GEAR TOURIST / SPORTSMAN SOLO Frame Tubular welded Rear wheel suspension Swing arm with hydraulic spring shock absorbers Sidecar: same as -40 Solo: Lower spring rate Front fork Leading link Telescopic spring Sidecar Cushioned body (on rubber cushions) and wheel on long-lever suspension with hydraulic spring shock absorber N/A Brakes Shoe-type with mechanical drive on front, rear and sidecar wheels, front wheel has dual cams. Tires 4″ x 19″ Front & Side: 22 psi cold Rear: 36 psi cold 3.5″ x 18″ Solo: Front 25 psi cold Rear: 32 psi cold -10′s: Front & side: 25 psi cold Rear: 36 psi cold CLEARANCES mm in Valves with engine cold 0.05 0.002 Between spark plug electrodes 0.50 – 0.65 0.020 – 0.026 Between brake shoes and drum 0.3 – 0.70 0.012 – 0.028 Backlash between tooth faces of bevel gears in final drive 0.1 – 0.3 0.004 Between rotor and ignition pickup 0.3 – 0.4 .012 – .016 FREE TRAVEL / ADJUSTMENTS mm in Hand brake control lever 5 – 8 0.2 – 0.3 Clutch control lever 5 – 8 0.2 – 0.3 Foot brake drive pedal ¼ of full stroke of pedal, 25 – 30 1.0 – 1.2 Toe-in throughout motorcycle center distance (exception: Sportsman 0 ° toe-in) 10 N/A Angle of motorcycle inclination to vertical plane (camber angle of rear wheel) 1° away from sidecar N/A Headlight installation (with motorcycle laden) horizontal (high beam) TORQUE SPECIFICATIONS Metric (in repair manual) US Equivalent Location on Bike 29 to 33 Nm 22 ft/lb. to 30 ft/lb. cylinder heads 22 to 25 kgf-m 175 ft/lb. to 185 ft/lb. fly wheel tightening screws 3.8 to 4.2 kgf-m 30 ft/lb. to 40 ft/lb. cylinder 2.1 to 3.0 kgf-m top 14 ft/lb. to 22 ft/lb. shock absorber 3.6 to 5.0 kgf-m bottom 28 ft/lb. to 36 ft/lb. shock absorber 3.0 to 3.4 kgf-m 22 ft/lb. to 26 ft/lb. bearing nut 3.0 to 3-4 kgf-m 22 ft/lb. to 26 ft/lb. final drive to swing arm bolts 1.6 to 1.8 kgf-m 12 ft/lb. to 14 ft/lb. oil pump bolt .8 to 1.0 kgf-m 5 ft/lb. to 8 ft/lb. engine sump 1.4 to 1.8 kgf-m 10 ft/lb. to 14 ft/lb. final drive case nuts 7 to 9 kgf-m 50 ft/lb. to 66 ft/lb. nut fastening the pinion bearing 2.2 to 2.8 kgf-m 16 ft/lb. to 20 ft/lb. reverse gear brake lever 1.8 to 2.0 kgf-m 14 ft/lb. to 16 ft/lb. generator gear nut 14.0 to 16.8 kgf-m 100 ft/lb to 120 ft/lb steering stem nut CONVERSIONS To convert from mm to in, divide by 25.4 (there are 25.4 mm per inch). To convert from liters to gallons, divide by 3.785 (there are 3.78 liters per gallon). To convert from liters to quarts, multiply by 1.056 (there are 1.056 quarts per liter). To convert from liters to pints, multiply by 2.112 (there are 2.112 pints per liter). To convert from km to miles, multiply by .62 (there is .62 mile per km). To convert from km/hr to mph, multiply by .62. To convert from Newton-meter (Nm) to inch-pound, multiply by 8.86. To convert from cm 3 (cc) to pints, divide by 473 (there are 473 cc per pint). To convert Celsius to Fahrenheit, F° = C° x 1.8 = 32°. To convert Fahrenheit to Celsius,C ° = (F° – 32° ) divided by 1.8

Incoming search terms:

APRILIA SL 750 SHIVER Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Aprilia V90 Four stroke longitudinal 90° V twin. Liquid cooling. Double overhead camshaft with mixed gear/chain drive; four valves per cylinder. Fuel Unleaded petrol. Bore x stroke 92 x 56.4 mm Total displacement 749.9 cc Compression ratio 11 : 1 Maximum power at the crank 95 HP at 9000 rpm. Maximum torque at the crank 8.25 kgm at 7000 rpm. Fuel system Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies Ignition Digital electronic, integrated with the injection, two spark plugs per cylinder Starting Electric Exhaust Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe Generator 450 W at 6000 rpm. Lubrication Wet sump Gearbox six speed, transmission ratio: 1° 36/14 (2.57) 2° 32/17 (1.88) 3° 30/20 (1.5) 4° 28/22 (1.27) 5° 23/26 (0.88) 6° 24/25 (0.96) Clutch Multi-plate in oil bath, cable operated. Primary drive Spur gears, transmission ratio: 60/31 (1.75) Final drive Chain Transmission ratio: 16/44 Frame Dismountable steel trellis connected with high strength bolts to aluminium side plates. Dismountable rear frame. Front suspension 43 mm upside-down fork. 120 mm wheel travel Rear suspension Aluminium alloy swingarm with reinforcement truss. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm. Brakes Front: Double stainless steel floating disc (Ø 320 mm ). Four piston radial calipers. Metal braided brake line. Rear: Steel disk (∅ 245 mm) with twin piston caliper. Metal braided brake line. Wheels In aluminium alloy Front: 3.50 X 17″ Rear: 6.00 X 17″ Tyres Radial tubeless; front: 120/70 ZR 17 rear: 180/55 ZR 17 Dimensions Overall length 2066 mm Overall width: 815 mm (at handlebars) Overall height: 1132 mm Seat height: 810 mm Wheelbase: 1449 mm Trail: 109 mm Rake angle: 25.7° Dry weight 189 kg Tank capacity 15 lt

Aprilia Sportcity One 125 Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Single cylinder 4-stroke. Forced air cooling. 2 valve head with overhead camshaft. Fuel Unleaded petrol. Bore and stroke 57 x 48.6 mm. Displacement 124 cc. Compression ratio 12:11 (125 cc). Maximum power 7.0 kW (9.52 HP) at 8,000 rpm. Max torque 10.04 Nm at 7,000 rpm. Fuel system Carburettor, Ø 26 mm. Ignition Electronic inductive discharge ignition with variable advance. Starting Electric. Alternator 300 W. Lubrication Wet sump. Forced circulation with mechanical pump. Gearbox Automatic variator. Clutch Automatic centrifugal dry clutch. Primary drive V belt. Final drive Gearbox. Frame Single cradle frame in high strength steel tube. Front suspension Hydraulic telescopic fork with 32 mm stanchions. Wheel travel 85 mm. Rear suspension Engine unit acting as swingarm. Single hydraulic shock absorber with adjustable spring preload. Wheel travel 84 mm. Brakes Front: 220 mm stainless steel disc with twin piston floating caliper. Rear: 140 mm drum. Wheels Light alloy. Front: 3.00 x 14″. Rear: 3.50 x 14″. Tyres Tubeless. Front: 120 / 70 x 14″. Rear: 120 / 70 x 14″. Dimensions Overall length: 1950 mm. Overall width: 740 mm. Wheelbase: 1358 mm. Seat height: 775 mm. Fuel tank Capacity 7.5 litres (including 1.5 litre reserve)

Aprilia SPORTCITY CUBE Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Single cylinder 4 stroke Displacement 278 cm3 Bore and Stroke 75 mm x 63 mm Fuel Unleaded fuel Compression ratio 11:1 Max power 16,1 kw (21,9 hp) a 7.250 rpm Max torque 23 Nm a 6.000 rpm Fuel system Electronic fuel injection Starting Electric Generator 380 W Ignition Inductive electronic ignition with variable timing Lubrication Wet sump, mechanical orbital pump Gearbox Automatic variator Clutch Automatic centrifugal Primary drive V belt Final drive Gearbox Frame Single cradle frame in high tensile strength steel Front suspension Hydraulic fork, wheel travel 100 mm Rear suspension Engine unit acting as swingarm. double hydraulic shock absorber with adjustable spring preload, wheel travel 80 mm Brakes Front D ∅ 260 mm twin disc with twin piston calipers Rear D ∅ 220 mm with single piston caliper Wheels Light alloy Front 2,75 x 15″ Rear 3,00 x 15″ Tyres Tubeless Front 120/70 15″ Rear 130/80 15″ Dimensions Length 2000 mm Width 730 mm Wheelbase 1375 mm Seat height 790 mm Tank capacity 8,5L (1,5L reserve) Under seat storage Large enough to hold a Jet helmet Aprilia Emissions Euro 3 Accessories Top Box City 35L, Top Box New Concept 32L embossed, Kit windshield, Kit sportive windshield, Cover Top Box City 35L, Seat cushion Top Box City 35L, Seat cushion Top Box New Concept 32L, Anti-vibration weights bars Colours 2009 Aprilia Black, Escape Grey

Incoming search terms: