2010 APRILIA Shiver Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine type Aprilia V90 four-stroke longitudinal 90° V-twin engine, liquid cooled, double overhead camshaft with mixed gear/chain timing system, four valves per cylinder. Fuel Unleaded petrol Bore and stroke 92 x 56.4 mm Total engine capacity 749.9 cc Compression ratio 11: 1 Maximum power at crankshaft 95 hp at 9,000 rpm Maximum torque at crankshaft 8.25 kgm at 7,000 rpm Fuel system Ride by Wire integrated engine control system. Ignition Digital electronic ignition integrated with injection system. Starting Electric Exhaust system 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and lambda probe Alternator 450 W at 6,000 rpm Lubrication Wet sump Gearbox 6 speeds, drive ratio: 1st 36/14 (2.57) 2nd 32/17 (1.88) 3rd 30/20 (1.5) 4th 28/22 (1.27) 5th 23/26 (0.88) 6th 24/25 (0.96) Clutch Multiple discs in oil bath, hydraulically operated Primary drive Straight cut gears, drive ratio: 60/31 (1.75) Secondary drive Chain. Drive ratio: 16/44 Chassis Modular tubular steel frame fastened to aluminium side plates by high strength bolts. Removable rear subframe. Front suspension Upside down fork with * 43 stanchions. Wheel travel 120 mm. Rear suspension Aluminium alloy swingarm; with swingarm stiffener brace. Hydraulic shock absorber with adjustable rebound and preload. Wheel travel 130 mm. Brakes Front: Dual * 320 mm diam. wave stainless steel floating disc. Radial callipers with four pistons. Metal braided brake pipe. 2-channel Continental ABS system Rear: Stainless steel disc * 245 mm. Single piston calliper. Metal braided brake pipe. Wheel rims Aluminium alloy Front: 3.50 X 17″ Rear: 6.00 x 17″ Tyres Radial tubeless tyres; front: 120/70 ZR 17 rear: 180/55 ZR 17 Dimensions Max. length 2,265 mm Max. width 810 mm (at handlebar) Max. height 1,135 mm (at instrument panel) Saddle height 800 mm Centre to centre distance 1,440 mm Trail 109 mm Steering angle 25.7° Tank 15 lt

Incoming search terms:

Aprilia Shiver 750 Sport Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Type Aprilia V90 four-stroke longitudinal 90° V-twin engine, liquid cooled, double overhead camshaft with mixed gear/chain timing system, four valves per cylinder. Capacity 749.9 cc Bore and stroke 92 x 56.4 mm Compression ratio 11 : 1 Maximum power at crank 95 HP at 9000 rpm. Max Torque at crank 8.25 kgm at 7000 rpm. Fuel supply Ignition Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies. Digital electronic, integrated with the injection. Exhaust system Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe. Clutch Multi-plate in oil bath. Hydraulically operated. Lubrication Wet sump Frame Modular tubular steel frame fastened to aluminium side plates by high strength bolts. Removable rear subframe. Front suspension 43 mm upside-down fork. 120 mm wheel travel. Rear suspension Aluminium alloy swingarm with swingarm stiffener brace. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm. Front brakes Wave stainless steel floating disc (Ø 320 mm). Four piston radial callipers. Metal braided brake line. Rear brake Wave Stainless steel disc (∅ 240 mm) with single piston calliper. Metal braided brake line. Wheels Aluminium alloy Front : 3.50 X 17″ Rear : 5.50 X 17″ Length 2265 mm Width 800 mm (at handlebars) Height Tank Capacity 1135 mm (at instruments) 15 Litres

Aprilia Shiver GT ABS Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Technical Specifications Aprilia Shiver GT ABS Engine type Aprilia V90 four-stroke longitudinal 90° V-twin engine, liquid cooled, double overhead camshafts with mixed gear/chain timing system, four valves per cylinder. Tri-Map Ride-by- Wire system Fuel Unleaded Bore and stroke 92 x 56.4 mm Total engine capacity 749.9 cc Compression ratio 11: 1 Maximum power at crankshaft 95 hp at 9,000 rpm Maximum torque at crankshaft 8.25 kgm at 7,000 rpm Induction and fuel system Integrated engine management system. Injection system with Ride by Wire throttle opening system and Tri-Map mapping selection Ignition Digital electronic ignition integrated with injection system. Starter Electric Exhaust system 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and oxygen sensor Alternator 450 W at 6,000 rpm Lubrication Wet sump. Clutch Hydraulically operated multiplate wet clutch Primary drive Straight cut gears, drive ratio: 60/31 (1.75) Secondary drive Chain. Drive ratio: 16/44 Chassis Detachable steel frame linked with high resistant bolts and side aluminum plates. Removable rear sub frame. Front suspension Upside-down fork, stanchions ∅ 43. wheel travel 120 mm. Rear suspension Aluminum alloy swing arm; with swing arm stiffener brace. Hydraulic shock absorber with adjustable rebound and preload. Wheel travel 130 mm Brakes Front: Dual ∅ 320 mm diam. stainless steel floating discs. Radial calipers with four pistons. Metal braided brake pipe. Rear: ∅ 240 mm stainless steel disc. Single piston caliper. Metal braided brake pipe. Two-channel Continental ABS system Tyres Tubeless. Front: 120/70 ZR 17 Rear: 180/55 ZR 17 Dimensions Max Length: 2,265 mm Max Width: 800 mm Max height: 1,210 mm Tank 16 Litres

2007-2008 Kawasaki ER6 and Ninja 650R Lowering Kit Installation Instructions

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
1) Raise the motorcycle so the rear wheel is off the ground. As an example, you can use a motorcycle lift, two car jacks, or upside-down paint buckets placed under the foot pegs, but anything stable should do. ” Stable ” is the key word. Please take all precautions! 2) Using the 19 mm open wrench and the provided 8 mm hex wrench, loosen the button head bolt and locknut as shown This large washer will not be there on 2007 & 2008 models 3) Next, remove the locknut and the small washer from the back, and remove the button head bolt and the large washer from the front. You can pull out the button head bolt by slightly moving the rear suspension up and down at the same time. 4) 5) Lift the shock absorber and insert the spacer where the shock absorber was installed before. Note: The original bolt and washers (if any were on your bike) are not going to be used, but you should keep them for the future, in case you decide to uninstall the lowering kit. Slide over the main kit body and insert the provided hex head cap screw as shown Next, slide the provided hex head cap screw all the way through

Incoming search terms: