HARLEY DAVIDSON CLEAR/ SMOKED DOMED OR FLAT TURN SIGNAL LENS KITS INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 09-02-2011

download
CLEAR/SMOKED DOMED OR FLAT TURN SIGNAL LENS KITS Installation NOTE A Service Manual for your motorcycle is available from your Harley-Davidson Dealer. 1. See Figure 1. Remove existing turn signal lenses and discard. Retain lens mounting screws for installation. 2. Remove bulbs from turn signal assemblies. 3. Obtain new amber bulbs from kit. Install bulbs marked 1157A (Dual Filament) to the front turn signal assem- blies. Install bulbs marked 1156 (Single Filament) to the rear turn signal assemblies. 4. Refer to Figure 1. Using screws saved during removal, install the new turn signal lenses to front and rear turn signal assemblies. 5. Check turn signals for proper operation