HONDA 2005 CRF 50 F AKRAPOVIC RACING EXHAUST SYSTEM INSTALLATION

0

Filed Under (Honda) by admin on 03-12-2011

download
put the motorcycle on a side standn 2. unscrew and remove the bolts from the rear and front part of the motorcycle cowling (Figure 1, 2, 3, 4) m3. remove complete cowling together with the seat (Figure 5) 4. unscrew the bolt from the metal bracket for the muffler (Figure 6) 5. unscrew and remove the bolts on the flange of the header tube (Figure 7) 6. remove the stock exhaust system (Figure 8) 7. remove the stock heat shield (Figure 9) INSTALLATION OF THE AKRAPOVIC RACING EXHAUST SYSTEM installing the header tube: 1. attach the stock heat shield onto the Akrapovic header tube (Figure 10, 11) 2. set up the Akrapovic header tube and hand tighten the flange; use stock gasket; (Figure 12, 13) 3. make sure the header tube is not touching the engine or frame installing the muffler:
1. correctly position the muffler and slide it onto the header tube (Figure 14) 2. attach the spring at the muffler – header tube joint igure 15) 3. attach the muffler to the chassis hanging bracket – use the bolt, washer and spacers supplied in the Akrapovic kit. Do not
fully tighten. Make sure the additional parts from the Akrapovic kit are correctly installed. (Figure 16, 17) 4. make sure the header tube is not touching the engine or frame final installation: 1. tighten fully the bolts of the muffler metal bracket and header tube flange (Figure 18, 19) 2. reattach the complete cowling (Figure 20, 21, 22, 23, 24) 3. clean grease spots: a. muffler – titanium outer sleeve: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40 or equivalent) b. stainless steel header tube: use a soft cloth sprayed with a contact cleaner, then wipe with a soft dry cloth Cleaning will prevent spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the sticker. 4. position of the correctly installed Akrapovic RACING system (Figure 25)
5. Check the operation of the brakes and suspension. Make sure all the bolts are sufficiently tightened. In case the exhaust system touches the cowling or other parts repeat the adjustment of the exhaust system or contact your authorized dealer

HONDA XL 1000 V VARADERO 2005 AKRAPOVIC SLIP- ON SP SERIES EXHAUST SYSTEM

0

Filed Under (Honda) by admin on 21-11-2011

download
coat the bolt and interior side of the metal clamp with Akrapovic anti-seize lead-free copper paste (black tube)
2. correctly position and install the graphite inner sleeve and metal clamp 3. slide the link pipe onto the stock collector 4. hand tighten the bolt of the link pipe bracket 5. make sure the link pipes are not touching the frame and other parts 6.
perform the process on both sides of the motorcycle installing the muffler: 1. position the muffler correctly and slide it onto the outlet side of the link pipe (Figure 17) 2. attach the springs at the muffler – link pipe joint (Figure 18) 3. correctly position the carbon-fiber clamp and slide it onto the muffler – bear in mind the left offset of the carbon-fiber clamp for the right muffler and the right offset for the left muffler viewed from the rear. WARNING: open the clamp to slightly wider than the diameter of the outer sleeve of the muffler – do not scrape it along the muffler outer sleeve! (Figure 19) 4. hand tighten the carbon-fiber clamp onto the stock chassis hanging bracket – use the bolts, washer and spacers supplied in the Akrapovic kit. Do not fully tighten. Make sure the additional parts from the Akrapovic kit are correctly installed. (Figure 20, 21, 22) 5. make sure the muffler is not touching other parts of the motorcycle 6. perform the process on both sides of the motorcycle final installation: 1. tighten the bolt of the link pipe bracket (Figure 23) 2. tighten the carbon-fiber clamp (Figure 24) 3. tighten the metal clamp at the Akrapovic link pipe – stock collector joint (Figure 25) 4. perform the process on both sides of the motorcycle 5. clean grease spots: a. muffler – titanium outer sleeve: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40 or equivalent) b. muffler – carbon-fiber outer sleeve: use a soft dry cloth c. stainless steel link pipe: use a soft cloth sprayed with a contact cleaner, then wipe with a soft dry cloth Cleaning will prevent spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the sticker. 6. reattach side panels (Figure 26) 7. reconnect the electric connectors for turn signal lamps (Figure 27) 8. reattach the cable for locking / unlocking the seat (Figure 28) 9. reattach the passenger handlebars and top case plate (Figure 29, 30, 31, 32) 10. reattach both seats (Figure 33) 11. position of the installed Akrapovic Slip-on SP series system (Figure 34)

HARLEY DAVIDSON PUSHBUTTON FUEL CONSOLE DOOR RELEASE INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 20-02-2011

download
INSTALLATION 1. Open the fuel door. Remove and discard stock lock and nut. 2. See Figure 1. Install pushbutton lock (2) and nut (1) on fuel door. 3. Remove screws (A) and replace the stock hinge mounting clip with the hinge mounting clip (3) from the kit. Install stock screws. Do not over-tighten. 4. Close the fuel door. A small amount pressure will be needed to close the fuel door because it is now spring- loaded. NOTE To keep the pushbutton lock assembly operating smoothly, lightly spray lubricant on the mechanism as needed. SERVICE PARTS 1 2 3 B C A is05361 Figure 1. Service Parts: Console Pushbutton Fuel Door Release Table 1. Service Parts Part Number Description (Quantity) Item 84850-92 Nut, hex 1 Not Sold Separately Fuel release, pushbutton 2 10334 Clip, hinge mounting 3 Items mentioned in text, but not included in kit. Screw (2) A Hinge pin B Fuel door

1995 – 1999 HONDA CBR 900RR AKRAPOVIC BOLT-ON STREET LEGAL EXHAUST SYSTEM Installation instructions

0

Filed Under (Honda) by admin on 12-12-2010

download
REMOVAL OF STOCK EXHAUST SYSTEM 1. put the motorcycle on a side stand, we recommend a racing stand 2. unscrew and remove bolts from the muffler at the muffler – link pipe (header assembly) connection (Figure 1) 3. unscrew and remove the bolt from the metal hanging bracket and remove the muffler (Figure 2 & 3) INSTALLATION OF THE AKRAPOVIC BOLT-ON EXHAUST SYSTEM installing the muffler: 1. remove the stock gasket and install the copper gasket from the Akrapovic kit in the groove in the CNC ALU flange (Figure 4) 2. correctly orient the muffler and place it near the link pipe/header assembly 3. when the muffler and the link pipe are together, attach using the titanium bolts from the Akrapovic kit. Coat each bolt individually with bolt sealant before installing. (Figure 5) Tighten the bolts only hand tight – do not fully tighten! (Figure 6) 4. correctly position the carbon-fiber clamp and slide it onto the muffler – bear in mind the left offset of the carbon-fiber clamp viewed from the rear (Figure 7). WARNING: open the clamp to slightly wider than the diameter of the outer sleeve of the muffler – do not scrape it along the muffler outer sleeve! (Figure 8) 5. tighten the carbon-fiber clamp onto the stock bracket on the frame – use the stock bolts or the replacements from the Akrapovic kit, if supplied (Figure 9) 6. make sure that the BOLT-ON system is not touching any other parts of the motorcycle ! 7. example of the correct position of the installed Akrapovic BOLT-ON system (Figure 10) final installation: 1. Tighten the titanium bolts on the CNC ALU flange at the muffler – link pipe connection and also tighten the bolts on all of the brackets and clamps to which the exhaust system and the other dismounted parts of the motorcycle are attached 2. clean grease spots: a. muffler – titanium outer sleeve: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40 or equivalent) b. muffler – carbon-fiber outer sleeve: use a soft dry cloth Cleaning will prevent spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the sticker. 3. Check the operation of the brakes and suspension. Make sure all the bolts are sufficiently tightened. In case the exhaust system touches the cowling or other parts repeat the adjustment of the exhaust system or contact your authorized dealer.

1998 – 2002 KAWASAKI ZX 6R AKRAPOVIC BOLT-ON STREET LEGAL EXHAUST SYSTEM Installation instructions

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
1. install the copper gasket from the Akrapovic kit in the groove in the CNC ALU flange (Figure 4) 2. correctly orient the muffler and place it near the link pipe/header assembly (Figure 5) 3. when the muffler and the link pipe are together, attach using the titanium bolts from the Akrapovic kit. Coat each bolt individually with bolt sealant before installing. (Figure 6) Tighten the bolts only hand tight – do not fully tighten! (Figure 7) 4. correctly position the carbon-fiber clamp and slide it onto the muffler – bear in mind the left offset of the carbon-fiber clamp viewed from the rear (Figure 8). WARNING: open the clamp to slightly wider than the diameter of the outer sleeve of the muffler – do not scrape it along the muffler outer sleeve! (Figure 9) 5. tighten the carbon-fiber clamp onto the stock bracket on the frame – use the stock bolts or the replacements from the Akrapovic kit, if supplied (Figure 10) 6. make sure that the BOLT-ON system is not touching any other parts of the motorcycle ! 7. example of the correct position of the installed Akrapovic BOLT-ON system (Figure 11) final installation: 1. Tighten the titanium bolts on the CNC ALU flange at the muffler – link pipe connection and also tighten the bolts on all of the brackets and clamps to which the exhaust system and the other dismounted parts of the motorcycle are attached 2. clean grease spots: a. muffler – titanium outer sleeve: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40 or equivalent) b. muffler – carbon-fiber outer sleeve: use a soft dry cloth Cleaning will prevent spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the sticker. 3. Check the operation of the brakes and suspension. Make sure all the bolts are sufficiently tightened. In case the exhaust system touches the cowling or other parts repeat the adjustment of the exhaust system or contact your authorized dealer.

APRILIA SPORTCITY 250/ 200/ 125 STREET LEGAL EXHAUST SYSTEM Installation instructions

0

Filed Under (Aprilia) by admin on 26-10-2010

download
1. Put the motorcycle on a central stand. Make sure, that surface is solid and flat. 2. Unscrew the bolt from the metal clamp at the muffler – collector joint, all muffler brackets and remove the muffler (Figure 1, 2, 3, 4). T-handle 10mm wrench T-handle 12mm wrench T-handle 13mm wrench T-handle 5mm three hexagon key wrench Spring puller Figure 1 Figure 2 Figure 3 Figure 4
NAV – 333 3 INSTALLATION OF THE AKRAPOVIC SLIP-ON EXHAUST SYSTEM: 1. Insert the graphite gasket into the inlet bush of the link-pipe and correctly attach the metal clamp on the inlet bush of the link-pipe (Figure 5, 6). Slide the link pipe onto the stock collector (Figure 7, 8). Insert the catalytic converter into the link- pipe as shown (Figure 9, 10). Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 NAV – 333 4 Figure 15 Figure 16 2. Slide the muffler onto the link-pipe and attach the springs (Figure 11, 12). Correctlyassemble the bolt, washer and aluminium distance bushe (Figure 13, 14). Tighten the bolts of muffler bracket and metal clamp (Figure 15, 16). 5.9Nm 4.3 ftlb 21Nm 15ftlb Figure 11 Figure 12 Figure 13 Figure 14 NAV – 333 5 final installation: 1. Clean grease spots: a. Muffler – titanium outer sleeve: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40 or equivalent). b. Carbon-fiber outlet cap: use a soft dry cloth. c. Stainless steel link pipe: use a soft cloth sprayed with a contact cleaner, then wipe with a soft dry cloth Cleaning will prevent spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the sticker.

KAWASAKI ZX 6R, ZX 6RR AKRAPOVIC RACING AND EVOLUTION EXHAUST SYSTEM Installation instructions

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
REMOVAL OF STOCK EXHAUST SYSTEM 1. put the motorcycle on a side stand, we recommend a racing stand 2. remove the lower cowling (complete) – unscrew all bolts and remove the plastic bushings (Figure 1, 2, 3, 4) 3. unscrew the bolt for the metal clamp on the link pipe (at the link pipe – collector joint) (Figure 5) 4. unscrew and remove the bolt for the muffler clamp (Figure 6) 5. remove the link pipe together with the muffler (link pipe and muffler are welded together). We recommend spraying the joint with a multi-purpose spray lubricant (WD-40 or equivalent) 6. if you are mounting the optional carbon-fiber muffler bracket, remove the stock muffler bracket 7. unscrew and remove the bolts on the lower radiator brackets and move the radiator out of the way – do not damage the radiator cooling fins (Figure 7, 8) 8. remove the bolts on the flanges (Figure 9) 9. remove the header tubes together with the flanges (Figure 10) INSTALLATION OF THE AKRAPOVIC RACING OR EVOLUTION SYSTEM installing the header tubes: 1. check the position of the radiator – be careful not to damage the fins 2. use the stock gaskets installed in the exhaust port, or place them on the Akrapovic sleeves 3. install the sleeves together with the flanges and tensioning springs – make sure they are correctly oriented and correctly installed, and that the holes for the springs line up with the holes on the tabs on the header tubes (Figure 11 & 12) 4. tighten the flanges 5. mount the header tubes, which come together with the collector (Figure 13) 6. attach the springs (Figure 14) 7. make sure the header tubes are not touching the engine, the radiator, tubes, electrical installations etc. installing the independent link pipe: 1. if installing the EVOLUTION model use ceramic anti-seizing grease 2. slide the link pipe (inlet side) onto the collector (Figure 15) 3. check the orientation of the link pipe – the holes for the springs must line up 4. attach the springs 5. make sure the link pipe is not touching the frame and other parts installing the muffler: 1. install the carbon-fiber muffler bracket, if applicable 2. position the muffler correctly and slide it onto the outlet side of the link pipe; if installing a titanium link pipe use ceramic anti-seizing grease