Yamaha XV 1300 V star XVS13AW OWNER'S MANUAL

0

Filed Under (Yamaha) by admin on 04-12-2010

download
1. Front turn signal/position lights (page 6-34) 2. Headlight (page 6-32) 3. Seat lock (page 3-11) 4. Fuel injection system fuse (page 6-30) 5. Fuse box (page 6-30) 6. Main fuse (page 6-30) 7. Helmet holder (page 3-12) 8. License plate light (page 6-35) 9. Rear turn signal light (page 6-34) 10.Engine oil level check window (page 6-11) 11.Shift pedal (page 3-8) 12.Engine oil filler cap (page 6-11) DESCRIPTION 2-2 2 EAU10420 Right view 1. Tail/brake light (page 6-33) 2. Rear brake fluid reservoir (page 6-22) 3. Owner’s tool kit (page 6-1) 4. Battery (page 6-29) 5. Air filter element (page 6-15) 6. Fuel tank cap (page 3-9) 7. Front brake fluid reservoir (page 6-22) 8. Brake pedal (page 3-9) 9. Engine oil filter cartridge (page 6-11) 10.Engine oil drain bolt (page 6-11) 11.Coolant reservoir (page 6-14) 12.Shock absorber assembly spring preload adjusting ring (page 3-12) DESCRIPTION 2-3 2 EAU10430 Controls and instruments 1. Clutch lever (page 3-8) 2. Left handlebar switches (page 3-6) 3. Multi-function meter unit (page 3-3) 4. Main switch/steering lock (page 3-1) 5. Right handlebar switches (page 3-6) 6. Throttle grip (page 6-16) 7. Brake lever (page 3-8) INSTRUMENT AND CONTROL FUNCTIONS 3-1 3 EAU10460 Main switch/steering lock The main switch/steering lock controls the ignition and lighting systems, and is used to lock the steering. The various positions are described below. EAU10540 ON All electrical circuits are supplied with power, and the meter lighting, taillight, license plate light and position lights come on, and the engine can be started. The key cannot be removed. NOTE: The headlight comes on automatically when the engine is started and stays on until the key is turned to “OFF”, even if the engine stalls. EAU10660 OFF All electrical systems are off. The key can be removed. EAU10680 LOCK The steering is locked, and all electrical systems are off. The key can be re- moved. To lock the steering 1. Turn the handlebars all the way to the left. 2. Push the key in from the “OFF” position, and then turn it to “LOCK” while still pushing it. 3. Remove the key.

Incoming search terms:

STROKE DOWNHILL MOUNTAIN BIKE SHOCK SPECIFICATIONS

0

Filed Under (Tips and Review) by admin on 01-12-2010

download
The shock has an adjustable rebound and standard Hi/low compression. The optional independent hi/ low compression adjuster has a low speed brass screw and a seperate blue high speed hex. The rebound adjuster is at the bottom of the shock. The standard setting is 8 clicks out (counter clockwise) from full hard. To increase rebound damping turn the adjuster in (clockwise), this will slow the extension of the shock. To decrease rebound damping turn the adjuster out (counter clockwise) this will quicken the extension of the shock. The standard compression adjuster has a the slotted brass screw on the reservoir. The standard setting is 12 clicks out low/hi speed brass screw(counter clockwise) and 1.75 turns out on the blue hex high speed adjuster from full hard. To increase compression damping turn the adjuster in (clockwise) – this will stiffen the compression of the shock. The low speed compression adjuster will soften small bumps and improve traction. The optional high speed adjuster will firm up the damping for big hits with no loss in small bump compliance, firmer settings will improve pedaling as well, lighter settings will smooth out square edge hits. Spring preload can also be changed to tune the shock to the weight of the rider. The shock spring preload can be varied by tightening or loosening the preload collars. The standard preload is 1.5 turns, (min 1 turn / max 3 turns). The rider sag must be adjusted to 1/3 of the total stroke with the rider sitting on the bike. This is the difference from fully extended position to the rider sitting. The ride height can be raised or lowered ± 5 mm to quicken or slow steering within the range of preload settings

HARLEY DAVIDSON FL SOFTAIL PROFILE LOW FRONT SUSPENSION KIT INSTALLATION

0

Filed Under (Harley Davidson) by admin on 30-11-2010

download
Fork Spring Removal 1. Elevate and support the vehicle so the front tire is off the floor and the forks are fully extended. 4 9 3 1 10 11 2 5 6 7 8 is04004 1. Slider tube cap 2. Spacer washer 3. Oil seal 4. Clamp bolt and washer 5. Fork tube plug 6. O-ring 7. Fork spring 8. Tight-wound end of spring 9. Fork slider tube 10. Fork slider 11. Drain screw and washer Figure 1. Front Fork NOTE Remove the brake caliper from the fork slider. DO NOT remove the brake line from the caliper. 2. Remove the front wheel. See FRONT WHEEL: FLSTC/FLSTF/FLSTN in the Service Manual. 3. Remove the front fender. See FRONT FENDER in the Service Manual. 4. See Figure 1. Remove the slider tube cap (1), spacer (2) and oil seal (3) from the top of one fork side. Save the cap and spacer. The oil seal can be discarded. 5. Loosen the clamp bolt (4) and pull the fork from the brackets. 6. Repeat Steps 4 and 5 for the other fork side. -J00280 1 of 4 Wear saf ety glasses or gog gles when ser vicing f ork assembly. Do not remove slider tube caps without relieving spring preload or caps and springs can fly out, which could result in death or serious injury. (00297a) NOTE Be careful not to damage the O-ring. 7. See Figure 1. Remove the fork tube plug (5) and O-ring (6). Pull the spring (7) out of the slider tube (9). Remove the drain screw and washer (11), and drain the fork. Reinstall the drain screw and washer, and tighten to 52-78 in-lbs (5.9-8.9 Nm). 8. Repeat Step 7 for the other fork side. NOTE The Profile® Low Front Suspension Kit requires a different amount of H-D TYPE E FORK OIL than is listed in the Service Manual. NOTE Measure the oil level from the top of the fork tube with the fork spring removed and the fork fully compressed. 9. See FRONT FORK OIL in the Service Manual, but substitute the measures below. Fill the forks with Harley- Davidson TYPE E FORK OIL: • 1986 through 1999 models: •11.7 oz (345 cc) of oil, or •5.2 inch (132 mm) from top of oil level to top of tube. • 2000 and later models: •13.4 oz (396 cc) of oil, or •4.1 inch (104 mm) from top of oil level to top of tube. Fork Spring Installation 1. Insert a new Profile Low spring (7) from the kit into each slider tube (9), with the tight-wound portion (8) toward the bottom of the fork slider. NOTE Be careful not to damage the O-ring. 2. Install the fork tube plug (5) and O-ring (6) assembly into the slider tube and tighten securely. Be sure that one flat on each fork tube plug faces toward the inside of the fork. 3. Insert both fork side assemblies up through the slider covers, the fork stem and bracket, and the upper bracket. 4. Obtain two new oil seals (3), H-D Part Number 45733-48, and the spacer washers (2) and slider tube caps (1) saved earlier. Place an oil seal, followed by a spacer washer, onto each fork tube plug. 5. Insert the threads of a slider tube cap through each washer and seal, and into the fork tube plugs. Tighten to 40-60 ft- lbs (54.2-81.3 Nm). 6. Tighten the fork stem bracket clamp bolts (4) to 30-35 ft- lbs (40.7-47.5 Nm). 7. Install the front fender. See FRONT FENDER in the Service Manual. Install the front wheel and brake caliper. See FRONT WHEEL: FLSTC/FLSTF/FLSTN in the Service Manual. Jiffy Stand Removal/Installation 1. Move the jiffy stand to the retracted (up) position. Wear safety glasses or goggles when removing or installing spring. Spring tension can cause spring, attached components and/or hand tools to fly out which could result in death or serious injury. (00477c) 2. See Figure 3. Unfasten the jiffy stand leg spring (A) from the vehicle. Remove the hex bolt (B), lock washer (C), flat washer (D) and leg stop (E) from the threaded end of the jiffy stand leg. Discard the jiffy stand leg, but retain all other components. 3. Clean and inspect the jiffy stand attaching parts and mounting bracket for wear or damage. If parts replacement is necessary, refer to the Jiffy Stand section of your Service Manual for replacement procedures

BMW F800 GS Rider's Manual

0

Filed Under (BMW) by admin on 26-11-2010

download
General view, left side 1 Power socket (74) 2 Seat lock (55) 3 Engine-oil filler neck and oil dipstick (87)
2 12 z General views General view, right side 1 Fuel filler neck (66) 2 Brake-fluid reservoir, rear (91) 3 Vehicle Identification Number (VIN) (on steering-head bearing), Type plate (on steering-head bearing) 4 Brake-fluid reservoir, front (90) 5 Coolant level indicator (behind side panel) (91), Coolant filler neck (behind side panel) (92) 6 Adjuster for springpreload, rear (51) 7 Adjuster for damping characteristic, rear suspension (52)
Underneath the seat 1 Location of first-aid kit (OA) 2 Toolkit 3 Payload table 4 Table of tyre pressures 5 Helmet holder (56) 6 Rider’sManual 7 Tool for adjusting spring preload (51) 2 14 z General views Underneath the trim panel 1 Battery (112) 2 Air-filter housing (110) Handlebar fitting, left 1 Operating the on-board computerOE (39) 2 Operating the ABSOE (49) 3 Horn 4 Flashing turn indicators, left (46), Hazard warn- ingflashers (47) 5 High-beam headlight and headlight flasher (45)

2011 Kawasaki W800 Specifications

0

Filed Under (Kawasaki) by admin on 17-11-2010

ENGINE

* Engine type Air-cooled, 4-stroke Vertical Twin
* Displacement 773 cm³
* Bore x stroke 77.0 x 83.0 mm
* Compression ratio 8.4:1
* Valve/Induction system SOHC, 8 valves
* Fuel system Fuel injection:?34 mm x 2 with sub-throttles
* Ignition Digital
* Starting Electric
* Lubrication Forced lubrication, wet sump

DRIVETRAIN

* Transmission 5-speed, return
* Final Drive Chain
* Primary reduction ratio 2.095 (88/42)
* Gear ratios: 1st 2.353 (40/17)
* Gear ratios: 2nd 1.590 (35/22)
* Gear ratios: 3rd 1.240 (31/25)
* Gear ratios: 4th 1.000 (28/28)
* Gear ratios: 5th 0.851 (23/27)
* Final reduction ratio 2.467 (37/15)
* Clutch Wet multi-disc, manual

FRAME

* Frame type Double-cradle, high-tensile steel
* Wheel travel, front 130 mm
* Wheel travel, rear 105 mm
* Tyre, front 100/90-19M/C 57H
* Tyre, rear 130/80-18M/C 66H
* Rake/Trail 27° / 108 mm
* Steering angle, left / right 37° / 37°

SUSPENSION

* Suspension, front 39 mm telescopic fork
* Suspension, rear Twin shocks
* Type: Twin shocks
* Spring preload: 5-way

BRAKES

* Brakes, front Type: Single 300 mm disc
* Caliper: Twin-piston
* Brakes, rear Type: Drum, 160 mm

DIMENSIONS

* Dimensions (L x W x H) 2,180 x 790 x 1,075 mm
* Wheelbase 1,465 mm
* Ground Clearance 125 mm
* Seat height 790 mm
* Curb Mass 216 kg
* Fuel capacity 14 litres

Incoming search terms:

APRILIA SL 750 SHIVER Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Aprilia V90 Four stroke longitudinal 90° V twin. Liquid cooling. Double overhead camshaft with mixed gear/chain drive; four valves per cylinder. Fuel Unleaded petrol. Bore x stroke 92 x 56.4 mm Total displacement 749.9 cc Compression ratio 11 : 1 Maximum power at the crank 95 HP at 9000 rpm. Maximum torque at the crank 8.25 kgm at 7000 rpm. Fuel system Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies Ignition Digital electronic, integrated with the injection, two spark plugs per cylinder Starting Electric Exhaust Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe Generator 450 W at 6000 rpm. Lubrication Wet sump Gearbox six speed, transmission ratio: 1° 36/14 (2.57) 2° 32/17 (1.88) 3° 30/20 (1.5) 4° 28/22 (1.27) 5° 23/26 (0.88) 6° 24/25 (0.96) Clutch Multi-plate in oil bath, cable operated. Primary drive Spur gears, transmission ratio: 60/31 (1.75) Final drive Chain Transmission ratio: 16/44 Frame Dismountable steel trellis connected with high strength bolts to aluminium side plates. Dismountable rear frame. Front suspension 43 mm upside-down fork. 120 mm wheel travel Rear suspension Aluminium alloy swingarm with reinforcement truss. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm. Brakes Front: Double stainless steel floating disc (Ø 320 mm ). Four piston radial calipers. Metal braided brake line. Rear: Steel disk (∅ 245 mm) with twin piston caliper. Metal braided brake line. Wheels In aluminium alloy Front: 3.50 X 17″ Rear: 6.00 X 17″ Tyres Radial tubeless; front: 120/70 ZR 17 rear: 180/55 ZR 17 Dimensions Overall length 2066 mm Overall width: 815 mm (at handlebars) Overall height: 1132 mm Seat height: 810 mm Wheelbase: 1449 mm Trail: 109 mm Rake angle: 25.7° Dry weight 189 kg Tank capacity 15 lt

Incoming search terms:

Aprilia Sportcity One 125 Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Single cylinder 4-stroke. Forced air cooling. 2 valve head with overhead camshaft. Fuel Unleaded petrol. Bore and stroke 57 x 48.6 mm. Displacement 124 cc. Compression ratio 12:11 (125 cc). Maximum power 7.0 kW (9.52 HP) at 8,000 rpm. Max torque 10.04 Nm at 7,000 rpm. Fuel system Carburettor, Ø 26 mm. Ignition Electronic inductive discharge ignition with variable advance. Starting Electric. Alternator 300 W. Lubrication Wet sump. Forced circulation with mechanical pump. Gearbox Automatic variator. Clutch Automatic centrifugal dry clutch. Primary drive V belt. Final drive Gearbox. Frame Single cradle frame in high strength steel tube. Front suspension Hydraulic telescopic fork with 32 mm stanchions. Wheel travel 85 mm. Rear suspension Engine unit acting as swingarm. Single hydraulic shock absorber with adjustable spring preload. Wheel travel 84 mm. Brakes Front: 220 mm stainless steel disc with twin piston floating caliper. Rear: 140 mm drum. Wheels Light alloy. Front: 3.00 x 14″. Rear: 3.50 x 14″. Tyres Tubeless. Front: 120 / 70 x 14″. Rear: 120 / 70 x 14″. Dimensions Overall length: 1950 mm. Overall width: 740 mm. Wheelbase: 1358 mm. Seat height: 775 mm. Fuel tank Capacity 7.5 litres (including 1.5 litre reserve)

Aprilia SPORTCITY CUBE Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Single cylinder 4 stroke Displacement 278 cm3 Bore and Stroke 75 mm x 63 mm Fuel Unleaded fuel Compression ratio 11:1 Max power 16,1 kw (21,9 hp) a 7.250 rpm Max torque 23 Nm a 6.000 rpm Fuel system Electronic fuel injection Starting Electric Generator 380 W Ignition Inductive electronic ignition with variable timing Lubrication Wet sump, mechanical orbital pump Gearbox Automatic variator Clutch Automatic centrifugal Primary drive V belt Final drive Gearbox Frame Single cradle frame in high tensile strength steel Front suspension Hydraulic fork, wheel travel 100 mm Rear suspension Engine unit acting as swingarm. double hydraulic shock absorber with adjustable spring preload, wheel travel 80 mm Brakes Front D ∅ 260 mm twin disc with twin piston calipers Rear D ∅ 220 mm with single piston caliper Wheels Light alloy Front 2,75 x 15″ Rear 3,00 x 15″ Tyres Tubeless Front 120/70 15″ Rear 130/80 15″ Dimensions Length 2000 mm Width 730 mm Wheelbase 1375 mm Seat height 790 mm Tank capacity 8,5L (1,5L reserve) Under seat storage Large enough to hold a Jet helmet Aprilia Emissions Euro 3 Accessories Top Box City 35L, Top Box New Concept 32L embossed, Kit windshield, Kit sportive windshield, Cover Top Box City 35L, Seat cushion Top Box City 35L, Seat cushion Top Box New Concept 32L, Anti-vibration weights bars Colours 2009 Aprilia Black, Escape Grey

Aprilia Shiver 750 Sport Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Type Aprilia V90 four-stroke longitudinal 90° V-twin engine, liquid cooled, double overhead camshaft with mixed gear/chain timing system, four valves per cylinder. Capacity 749.9 cc Bore and stroke 92 x 56.4 mm Compression ratio 11 : 1 Maximum power at crank 95 HP at 9000 rpm. Max Torque at crank 8.25 kgm at 7000 rpm. Fuel supply Ignition Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies. Digital electronic, integrated with the injection. Exhaust system Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe. Clutch Multi-plate in oil bath. Hydraulically operated. Lubrication Wet sump Frame Modular tubular steel frame fastened to aluminium side plates by high strength bolts. Removable rear subframe. Front suspension 43 mm upside-down fork. 120 mm wheel travel. Rear suspension Aluminium alloy swingarm with swingarm stiffener brace. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm. Front brakes Wave stainless steel floating disc (Ø 320 mm). Four piston radial callipers. Metal braided brake line. Rear brake Wave Stainless steel disc (∅ 240 mm) with single piston calliper. Metal braided brake line. Wheels Aluminium alloy Front : 3.50 X 17″ Rear : 5.50 X 17″ Length 2265 mm Width 800 mm (at handlebars) Height Tank Capacity 1135 mm (at instruments) 15 Litres

Incoming search terms: