YAMAHA FJR 1300 2006 GPS-Halter INSTALLATION MANUAL

0

Filed Under (Yamaha) by admin on 10-01-2012

download
Mounting Instructions SW-MOTECH products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. SW Motech takes no responsibility for damages caused by improper installation. All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: All screws, bolts and nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite”) should be used to secure all screws, bolts and nuts. Alle vom Motorrad gelösten Schrauben sind gemäß Herstellerangaben wieder

TRIUMPH Speed Triple Alu-Rack Mounting Instructions

0

Filed Under (Triumph) by admin on 30-10-2010

download
Montagehinweise Mounting Instructions Alu-Rack Alu-Rack SW-MOTECH GmbH & Co. KG Bahnhofstrasse 44d 35282 Rauschenberg -Germany- Tel.: ++ 49 (0) 6425 816 800 Fax: ++ 49 (0) 6425 816 810 www.sw-motech.com SW-MOTECH products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. SW-MOTECH takes no responsibility for damages caused by improper installation. All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: All screws, bolts and nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite”) should be used to secure all screws, bolts and nuts. Max. Load On Rear Carrier: 7,5 Kg (16,5 lbs) inclusive case and adapter or the motorcycle manufacturer’s weight limit, whichever is less

ALU-RACK TRIUMPH Tiger 1050 Mounting Instruction

0

Filed Under (Triumph) by admin on 30-10-2010

download
responsibility for damages caused by improper installation. All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: All screws, bolts and nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite”) should be used to secure all screws, bolts and nuts. Max. Load On Rear Carrier: 5 Kg (11 lbs) inclusive case and adapter or the motorcycle manufacturer’s weight limit, whichever is less

TRIUMPH Tiger 1050 Nonshock GPS-Halter Cockpit Mounting Instructions

0

Filed Under (Triumph) by admin on 30-10-2010

download
Mounting Instructions SW-MOTECH products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. SW Motech takes no responsibility for damages caused by improper installation. All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: All screws, bolts and nuts should be checked after driving the first 50 km to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite”) should be used to secure all screws, bolts and nuts. Alle vom Motorrad gelösten Schrauben sind gemäß Herstellerangaben wieder zu montieren, oder mit von SW- MOTECH gelieferten Schrauben zu ersetzen. Falls nicht anderweitig definiert, diese Schrauben nach Tabelle anziehen. Gegebenenfalls Schrauben mit flüssiger Schraubensicherung einkleben. Prüfen Sie nach 50 km alle Verbindungen auf festen Sitz. GPS.11.458.10000/B Revision: 00 SW-MOTECH GmbH & Co. KG Ernteweg 8/10 35282 Rauschenberg Germany Tel. +49 (0) 64 25/8 16 8-00 Fax +49 (0) 64 25/8 16 8-10 info@sw-motech.com www.sw-motech.com M5 5,5 Nm M6 9,6 Nm M8 23 Nm M5 5,5 Nm M6 9,6 Nm M8 23 Nm 6 GPS.00.085.003 Anzahl/ Pcs. 2 Verbindungsblech Connector Lug 5 GPS.00.085.006 Anzahl/ Pcs. 1 GPS-Trägerblech GPS-Bracket 01 00 10 GPS.00.085.004 Anzahl/ Pcs. 2 Fixierblech Fixing Lug 9 M5 x 16 DIN 7380 Anzahl/ Pcs. 4 Linsenkopfschrau be Lenshead Screw 2 M8 x 50 DIN 6912 Anzahl/ Pcs. 4 3 Unterlegscheibe Washe

Incoming search terms: