Toyota Body & Paint Preferred Partner Program

0

Filed Under (Toyota Manuals) by admin on 29-05-2011

Download
That’s why Toyota has created the innovative Body & Paint Preferred Partner Programme. Having tested a wide range of Body & Paint repair products, Toyota has selected a number of companies whose products are of the highest calibre and offer superior results, and who offer reliable, Europe-wide distribution and support. It recommends that all Toyota Authorised Repairers across Europe use products supplied by these companies. They are of course free to choose which supplier they work with from this list of recommendations. Whilst Toyota has negotiated competitive parameters with each partner, exact contract details should be agreed between the partner and the Toyota Authorised Repairer. The programme allows savings made to be reinvested into further improvement of Body & Paint activities

Toyota Tacoma 2001-2003 DASH PAD RATTLE REPAIR MANUAL

0

Filed Under (Toyota Manuals) by admin on 27-05-2011

Inspect locating pins of defroster nozzle and add 3M Squeak Reduction Tape (P/N 3M
06356) to locating pins as shown in Figure 2. 2. Add 3M Window Weld (P/N 3M 08611) to each of the four defroster nozzle assembly mounting points on the body. Noise Coming from Broken Dash Mounting Clips 1. Remove broken clips and pins (see Figure 3). 2. Install new clips and pins. 3. Apply 3M Squeak Reduction Tape (P/N 3M 06356) to pins (refer to the Tacoma Repair Manual, page BO-55, for applicable year)

Incoming search terms:

Toyota Tacoma 2001-2003 Dash Pad Removal & Installation Procedures

0

Filed Under (Toyota Manuals) by admin on 26-05-2011

Download

During a test drive, locate the noise source by using the palm of your hand to apply
pressure on the suspect area or by grasping and holding onto the suspected source.
When disassembling the dash, it is suggested that all of the identified noise reducing
countermeasures be performed, as shown below.
Noise Located at Defroster Duct
1. Remove instrument panel (refer to the Tacoma Repair Manual Volume 2, pages BO-
52 to BO-54, for applicable year).
2. Remove plastic defroster nozzle assembly and discard.
3. Add EPT sealer to the inlet and outlet surfaces of a new defroster nozzle assembly
(P/N 559501-04020).
4. Install the new defroster nozzle assembly.
5. Insulate all clips, pins and connectors used.

Incoming search terms:

Toyota Camry, 1992-1996 Avalon Repair & Service Manual

0

Filed Under (Toyota Manuals) by admin on 25-05-2011

epair manual covers all Toyota Camry 1992-1996, and Toyota Avalon models, 1995-1996.

Table of Contents

* Introduction: Vehicle identification numbers. Buying parts. Safety. Maintenance techniques. Chemical and lubricants, and more.
* Tune-up and routine maintenance
* Four-cylinder engine
* V6 engines
* General engine overhaul procedures
* Cooling, heating and air-conditioning systems
* Fuel and exhaust systems
* Engine electrical systems
* Emissions control systems
* Transmission

Incoming search terms:

Toyota Camry L4 – 2.4L 2004 Brakes and Traction Control Disc Brake System Service and Repair

0

Filed Under (Toyota Manuals) by admin on 24-05-2011

Download
REMOVE FRONT DISC BRAKE CYLINDER SLIDE BUSH 10. Remove the cylinder slide bush from the cylinder slide pin.
a. REMOVE FRONT DISC BRAKE BUSH DUST BOOT 11. Remove the 2 bush dust boots from the disc brake cylinder mounting. a. REMOVE FRONT DISC BRAKE CYLINDER MOUNTING LH 12. Remove the 2 bolts and disc brake cylinder mounting LH. a. REMOVE CYLINDER BOOT 13. Using a screwdriver, remove the set ring and cylinder boot.
a. REMOVE FRONT DISC BRAKE PISTON 14. Place a piece of cloth or similar, between the piston and the disc brake cylinder. a. Use compressed air to remove the piston from the disc brake cylinder. CAUTION: Do not place
your fingers in front of the piston when using compressed air. NOTICE: Do not spatter the brake fluid

PowerMax Turbo System XS21-1200 2000-02 Toyota Celica GT-S Installation Manual

0

Filed Under (Toyota Manuals) by admin on 24-05-2011

Download
Please bear in mind that the conversion from a normally aspirated engine into a turbocharged one is no easy task. This is the reason why we strongly suggest that only experienced professionals install this turbocharger system. In addition, we suggest that this turbocharger system only be installed on engines that are in good condition. Please
inspect the following: 1. Cooling system – make sure that this is within or better than factory specifications.
2. Ignition system – make sure that this is within or better than factory specifications and that the ignition timing is stock. 3. Fuel delivery system – make sure that the fuel pump, fuel filter, and fuel injectors are all working within or better than factory specifications. Also, make sure that the fuel used is at least 91 octane.

All 2002 – 2007 Toyota & 2004 – 2007 Scion Models REPAIR MANUAL SUPPLEMENT VEHICLE PULLING TO ONE SIDE

0

Filed Under (Toyota Manuals) by admin on 23-05-2011

Download
Relationship Between Tire Characteristics and Vehicle Pulling to One Side When radial tires are rotating, they have the characteristic of generating force in the lateral direction between the tire and the road surface. This lateral force is comprised of two factors: S Ply-steer, which changes direction according to the rotation direction of the tires.
S Conicity, which is generated in a fixed direction regardless of the tire rotation direction. If these lateral forces are too strong, vehicle pulling will occur. A. Ply-Steer Lateral force due to ply-steer is produced by the construction of the belts inside the tire tread. With radial tires, the wire of the belt is slanted as shown in the illustration below. Thus, it is in the lateral direction that tire tread easily changes shape (stretches), and lateral force is generated between the tire and the road surface in the lateral direction.

Incoming search terms:

Toyota Yaris 2006 up models 5 speed and Automatic Instruction Manual

0

Filed Under (Toyota Manuals) by admin on 23-05-2011

Download
Using the ⑥ bolt (1) and #15 bracket spacer B (1), attach #5 alternator bracket as shown in illustration. Install the alternator upside down. Using the ⑧ head bolt (1) and washer (1), attach alternator to #5 Alternator Bracket.
6. Using ⑱ bolt (1) and ⑬ nut (1), attach the alternator on bottom alternator mount (lowest hole on Bracket A).
7. After installing alternator, make sure the A/C line does not interfere with belts. If it does, push the A/C line forward and make sure the alternator has enough clearance. ⑧Bolt Washer 8. Some models will have addition A/C lines near engine mount (not shown here). Please adjust A/C line to clear alternator pulley. Please find a suitable spot where the A/C line will not interfere with the pulleys and tie theline down with zip ties

TOYOTA TRUCK 1985 & 4-RUNNER Gasoline REPAIR MANUAL

0

Filed Under (Toyota Manuals) by admin on 21-05-2011

Download
Use fender seat and floor covers to keep the vehicle clean and prevent damage.2. During disassembly, keep parts in order to facilitate re- assembly. 3. Observe the following: (a) Before performing electrical work, disconnect the cable from the battery terminal. (b) If it is necessary to disconnect the battery for inspec- tion or , always disconnect the cable from the negative ( —) terminal which is grounded to the vehi- cle body. (c) To prevent damage to the battery terminal post, loosen the terminal nut and raise the cable straight up without twisting it or prying it. (d) Clean the battery terminal posts and cable terminals with a shop rag. Do not scrape them with a file or such.

(e) Install the cable terminal to the battery post with the nut loose, and tighten the nut after installation. Do not use a hammer or such to tap the terminal on- to the post. (f ) Be sure the cover for the positive ( + ) terminal is pro- perly in place. Check hose and wiring connectors to make sure that tir
are secure and correct

Toyota Camry, Avalon, Solara, Lexus ES 300 1997-2001 repair and service manual

0

Filed Under (Toyota Manuals) by admin on 20-05-2011

repair manual covers all US and Canadian models of Toyota Camry, Avalon, Solara, and Lexus ES 300, 1997 through 2001.Table of ContentsIntroduction: Vehicle identification numbers; Buying parts; Maintenance techniques, and more. Tune-up and routine maintenance; Engine and overhaul procedures; Cooling, heating and air-conditioning systems; Fuel and exhaust systems; Engine electrical systems; Emissions control systems; Transmission;