Yamaha TW200N/ TW200NC SPECIFICATIONS AND SUPPLEMENTARY SERVICE MANUAL

0

Filed Under (Yamaha) by admin on 26-04-2011

download
GENERAL INFORMATION MOTORCYCLE IDENTIFICATION EAS00017 VEHICLE IDENTIFICATION NUMBER The vehicle identification number 1 is stamped into the right side of the steering head pipe. EAS00018 MODEL CODE The model code label 1 is affixed to the frame. This information will be needed to order spare parts CABLE ROUTING 1 Throttle cable 2 Front brake light switch lead 3 Right handlebar switch lead 4 Clutch cable 5 Left handlebar switch lead 6 Clutch switch lead 7 Front turn signal/position light lead (left) 8 Main switch lead 9 Indicator lights lead 0  Speedometer cable A Meter light lead B Headlight coupler C Wire harness D Front turn signal/position light lead (right) E Brake hose ب Fasten the brake hose with a plastic locking tie to the brake hose grommet. ة Fasten the wire harness with a plastic locking tie PERIODIC CHECKS AND ADJUSTMENTS INTRODUCTION This chapter includes all information necessary to perform recommended checks and abjustments.If followed, these preventive maintenance procedures will ensure more reliable vehicle operation, a longer service life and reduce the need for costly overhaul work.This information applies to vehicles already in service as well as to new vehicles that are being prepared for sale.All service technicians should be familiar with this entire chapter. PERIODIC MAINTENANCE CHART FOR EMISSION CONTROL SYSTEM

BMW R1200 GS Rider's Manual

0

Filed Under (BMW) by admin on 28-11-2010

download
General view, left side 1 Adjuster, springpreload, front (63) 2 Adjustment of windscreen (60) 3 Adjuster for headlight beam throw (underneath the in- strumentpanel) (69) 4 Clutch-fluid reservoir (116) 5 Type plate (on frame, behind side cover) 6 Seat lock (69) 7 Power socket (96) 8 Adjuster for damping characteristic, rear suspension (64) 9 Engine-oil filler neck (110) 10 Engine oil level indicator (109) 2 11 z General views
2 12 z General views General view, right side 1 Adjuster for springpreload, rear (63) 2 Fuel filler neck (84) 3 Brake-fluid reservoir, front (114) 4 Vehicle Identification Number (VIN) (on steering-head bearing) 5 Air filter (behind right side panel) (132) 6 Brake-fluid reservoir, rear (115) 2 13 z General views Underneath the seat 1 Rider’sManual 2 Battery (135) 3 Toolkit, Payload table (in tool tray), Tyre pressures table (in tool tray) 4 Helmet holder (71) 2 14 z General views Handlebar fitting, left 1 Operating the odometer (47), Operating the on- boardcomputerOE (49) 2 Operating the ABSOE (56), Operating ASCOE (58) 3 Operating ESAOE (66) 4 Horn 5 Flashing turn indicators, left (54), Hazard warn- ingflashers (55) 6 Headlight flasher and high- beam headlight (53) 2 15 z General views Handlebar fitting, right 1 Emergency off switch (kill switch) (56) 2 Starter button (76) 3 Grip heating 4 Flashing turn indicators, right (55), Hazard warn- ingflashers (55) 5 Cancel button, flashing turn indicators (55), Pushbut- ton, cancel hazard warning flashers (56)

BMW K1300S Rider's Manual

0

Filed Under (BMW) by admin on 27-11-2010

download
General view, right side 1 Engine oil level indicator (101) 2 Fuel filler opening (79) 3 Battery compartment (127) 4 Brake-fluid reservoir, front (102) 5 Vehicle identification number (ontheupperfront wheel control) 6 Type plate (on rear cross tube) 7 Brake-fluid reservoir, rear (105) 2 13 z Overviews Left handlebar fitting 1 High-beam headlight and headlight flasher (55) 2 Operating odometer (49) with onboardcomput- erOE Operating onboard computer (51) 3 Hazard warning flashers (56) 4 Operating turn indicators (56) 5 Horn 6 with Electronic Suspen- ionAdjustment (ESA II)OE Operating ESA (64) 7 ABS operation (58) with automatic Stability ControlOE Operating the ASC (59) 2 14 z Overviews Handlebar fitting, right 1 with heated handlebar gripsOE Heated handgrips (60) 2 Starter button (72) 3 Emergency ON/OFF switch (57) 2 15 z Overviews Underneath seat 1 Luggage loops 2 Rider’sManual (US Model) 3 Tire inflation pressure table 4 Payload table 5 Helmet holder (68) 6 Toolkit (100) 7 Engine oil fill location (102)

BMW F800 GS Rider's Manual

0

Filed Under (BMW) by admin on 26-11-2010

download
General view, left side 1 Power socket (74) 2 Seat lock (55) 3 Engine-oil filler neck and oil dipstick (87)
2 12 z General views General view, right side 1 Fuel filler neck (66) 2 Brake-fluid reservoir, rear (91) 3 Vehicle Identification Number (VIN) (on steering-head bearing), Type plate (on steering-head bearing) 4 Brake-fluid reservoir, front (90) 5 Coolant level indicator (behind side panel) (91), Coolant filler neck (behind side panel) (92) 6 Adjuster for springpreload, rear (51) 7 Adjuster for damping characteristic, rear suspension (52)
Underneath the seat 1 Location of first-aid kit (OA) 2 Toolkit 3 Payload table 4 Table of tyre pressures 5 Helmet holder (56) 6 Rider’sManual 7 Tool for adjusting spring preload (51) 2 14 z General views Underneath the trim panel 1 Battery (112) 2 Air-filter housing (110) Handlebar fitting, left 1 Operating the on-board computerOE (39) 2 Operating the ABSOE (49) 3 Horn 4 Flashing turn indicators, left (46), Hazard warn- ingflashers (47) 5 High-beam headlight and headlight flasher (45)

BMW F800 GS specification And Owner's Manual

0

Filed Under (BMW) by admin on 12-11-2010

download
General view, right side 1 Fuel filler neck (66) 2 Brake-fluid reservoir, rear (91) 3 Vehicle Identification Number (VIN) (on steering-head bearing), Type plate (on steering-head bearing) 4 Brake-fluid reservoir, front (90) 5 Coolant level indicator (behind side panel) (91), Coolant filler neck (behind side panel) (92) 6 Adjuster for springpreload, rear (51) 7 Adjuster for damping characteristic, rear suspension Standard status indicators Multifunction display 1 Clock (38) 2 Odometer and tripmeters (38) Telltale lights 1 High-beam headlight 2 Flashing turn indicators, left 3 Idle 4 Flashing turn indicators, right Service-due indicator If the next service is due in less than one month, the date for the next service is shown briefly after thePre-Ride Check completes. The month is shown as atwo- digit number and the year asa four-digit number, with a colon as separator, so in this example the next service is due in March 2007. 3 22 z Status indicators
If the motorcycle covers long dis- tancesinthe course of the year, under certain circumstances it might be necessary to have it serviced at a date in advance of the forecast due date. If the countdown distance to the odometer reading at whichaservice will be due is less than 1000 km, the distance is counted down in steps of 100kmandisshown briefly after the Pre-Ride Check completes. If service is overdue, the due date or the odometer reading at which service was due is accom- paniedbythe’General’warning light showing yellow. The word “Service”remains permanently visible. If the service-due indicator appears more than a month in advance of the actual due date or if the word “Service”does not show permanently even though a service is overdue, the date stored in memory in the instru- mentpanelis incorrect and must beset. This situation can occur if the battery was disconnected for a prolonged period of time. If you want to have the date set consulta specialist workshop, preferably an authorised BMW Motorraddealer. Status indicators with on-boardcomputerOE Multifunction display 1 Status-indicator panel of the on-boardcomputerOE (39) 2 Gear indicator (23) 3 Coolant temperature (24) 4 Fuel capacity (24) Gear indicator The gear engaged or N for neutral appears on the display.

Incoming search terms:

YAMAHA XVS1100 (L) SERVICE MANUAL

0

Filed Under (Yamaha) by admin on 07-11-2010

download
GENERAL INFORMATION MOTORCYCLE IDENTIFICATION EB100010 VEHICLE IDENTIFICATION NUMBER The vehicle identification number 1 is stamped into the right side of the steering head. MODEL LABEL The model label 1 is affixed to the frame. This information will be needed to order spare parts. 1-2 IMPORTANT INFORMATION GEN INFO EB101000 IMPORTANT INFORMATION PREPARATION FOR REMOVAL PROCE- DURES 1. Remove all dirt, mud, dust and foreign material before removal and disassembly. 2. Use proper tools and cleaning equipment. Refer to the “SPECIAL TOOLS” section. 3. When disassembling the machine, always keep mated parts together. This includes gears, cylinders, pistons and other parts that have been “mated” through normal wear. Mated parts must always be reused or replaced as an assembly. 4. During machine disassembly, clean all parts and place them in trays in the order of disassembly. This will speed up assembly and allow for the correct installation of all parts. 5. Keep all parts away from any source of fire. EB101010 REPLACEMENT PARTS 1. Use only genuine Yamaha parts for all replacements. Use oil and grease recommended by Yamaha for all lubrication jobs. Other brands may be similar in function and appearance, but inferior in quality. EB101020 GASKETS, OIL SEALS AND O-RINGS 1. Replace all gaskets, seals and O-rings when overhauling the engine. All gasket surfaces, oil seal lips and O-rings must be cleaned. 2. Properly oil all mating parts and bearings during reassembly. Apply grease to the oil seal lips. 1-3 IMPORTANT INFORMATION GEN INFO CAUTION: EB101030 LOCK WASHERS/PLATES AND COTTER PINS 1. Replace all lock washers/plates 1 and cotter pins after removal. Bend lock tabs along the bolt or nut flats after the bolt or nut has been tightened to specification

Incoming search terms: