2009 Honda CRF450R Decompression Plunger PRODUCT UPDATE CAMPAIGN

0

Filed Under (Honda) by admin on 21-04-2011

download
JH2PE053*9K700001 thru JH2PE053*9K703372 (*) Denotes check digit UPDATE PROCEDURE DEALER VENTORY Any affected unit in your inventory must be updated with a new decompression plunger and weight before delivery to the customer. Refer tothe PARTS INFORMATION and the UPDATE PROCEDURE sections of thisb Service Bulletin. Refer to the 2009 CRF450R Service Manual for specific removal instructions. 1. Remove the seat (page 3-3). 2. Remove the shrouds (page 3-4). 3. Properly hang the fuel tank (page 4-6). 4. Remove the camshaft (page 9-10) CUSTOMER INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely maintain your Honda. These procedures should not be attempted by “do-it-yourselfers,” and you should not assume this bulletin applies to your Honda, or that your Honda has the condition described. To determine whether this information applies, contact an authorized Honda dealer. 5. Replace the decompression weight and plunger with kit parts (page 9-14). 6. Reinstall all previously removed parts. IDENTIFICATION When you have completed the update, place a punch mark before the first digit of the V.I.N. located on the right side of the steering head. 0080 WARRANTY INFORMATION This Product Update Campaign ends on arch 7, 2012. Normal claim submission requirements apply. fter completing the UPDATE PROCEDURE,submit one warranty claim per unit with the following information: WARRANTY CLAIM TEMPLATE: Template: R02A* Flat Rate Time: 1.2 hours *Template reads “R-zero-2-A”.

Incoming search terms:

2006 Honda GL1800 AirbagCB Radio Squeal REPAIR PROCEDURE

0

Filed Under (Honda) by admin on 08-04-2011

download
To remedy this problem, a ferrite core harness kit is now available for installation. 2006 GL1800 VIIIA (Airbagmodels) with optional CBRadio. Install a ferrite harness core kit according to the installation instructions that are packaged with the kit. ÒÑÌÛæ • The kit includes both a rider and a passenger harness; it’s necessary to install both harnesses to eliminate the squealing noise. • Passengers must route the headset cord as shown. If routed otherwise, it will be too close to the motorcycle’s antenna, which can create an interference. Subharness installation can be confirmed by removing the left-side fairing pocket, and check- ingtoseeifthe harness is already installed. Ferrite CoreHarness Kit (1 required) P/N: 08E95-MCA-100WA H/C: 8607665 ÒÑÌÛæCallTechLineat (800) 421-1900 to order parts. Due to the limited number of affected units and parts availability, ordering will be controlled until May 31,2007. Normal warranty claim submission require- mentsapply. Submit one claim per VIN. Template: GL19 Flat RateTime: 0.3 hours

2001-2002 HONDA GL1800/A CD Changer Replacement

0

Filed Under (Honda) by admin on 03-03-2011

download
2001-2002 GL1800/A CD Changer Replacement ORDERING AND REPLACING THE CD CHANGER 1. Before calling the CD Changer Order Desk, have the following information ready: • VIN • Failure Information (i.e., symptom) • Warranty Status 2. To order, call the CD Changer Order Desk toll free: (888) 997-7278 . The CD Changer Order Desk hours are Monday thru Friday, 8:30am – 8:00pm EST. Part Number: 08A06-MCA-100RM Honda Code: 7097009 3. After calling the CD Changer Order Desk, an exchange CD Changer will be shipped overnight (freight prepaid). 4. Replace the faulty CD Changer with the exchange unit (see REPAIR PROCEDURE ). DO NOT remove the faulty CD Changer until you receive the exchange unit. DO NOT ATTEMPT TO REMOVE ANY STUCK CD’S. CHANGERS DAMAGED IN THIS WAY WILL BE RETURNED TO THE DEALER AND NO CORE CREDIT WILL BE ALLOWED. You will be billed $300.00 for the replacement unit. You must return the faulty CD Changer for a core credit and file a warranty claim to receive your total reimbursement (see TRANSACTION SUMMARY on page 3 for details). REPAIR PROCEDURE 1. Refer to the Installation Instructions included with the replacement CD Changer. 2. NOTE: You MUST remove the shipping bracket from the replacement unit before you complete the installation. If a CD is stuck inside the faulty unit, leave it there : • The vendor needs it for diagnosing and testing. • If you try to remove it, you’ll damage the unit. • The vendor will return the unit if it has been damaged during attempted CD removal. Fill in the customer information on the Audio System Diagnosis and Core Return form. The vendor will remove the CD and mail it back to the customer. IDENTIFICATION No identification is necessary for this repair

2001-2002 GL1800/ A ORDERING AND REPLACING THE CD CHANGER

0

Filed Under (Honda) by admin on 29-01-2011

download
1. Before calling the CD Changer Order Desk, have the following information ready: • VIN • Failure Information (i.e., symptom) • Warranty Status 2. To order, call the CD Changer Order Desk toll free: (888) 997-7278 . The CD Changer Order Desk hours are Monday thru Friday, 8:30am – 8:00pm EST. Part Number: 08A06-MCA-100RM Honda Code: 7097009 3. After calling the CD Changer Order Desk, an exchange CD Changer will be shipped overnight (freight prepaid). 4. Replace the faulty CD Changer with the exchange unit (see REPAIR PROCEDURE ). DO NOT remove the faulty CD Changer until you receive the exchange unit. DO NOT ATTEMPT TO REMOVE ANY STUCK CD’S. CHANGERS DAMAGED IN THIS WAY WILL BE RETURNED TO THE DEALER AND NO CORE CREDIT WILL BE ALLOWED. You will be billed $300.00 for the replacement unit. You must return the faulty CD Changer for a core credit and file a warranty claim to receive your total reimbursement (see TRANSACTION SUMMARY on page 3 for details). REPAIR PROCEDURE 1. Refer to the Installation Instructions included with the replacement CD Changer. 2. NOTE: You MUST remove the shipping bracket from the replacement unit before you complete the installation. If a CD is stuck inside the faulty unit, leave it there : • The vendor needs it for diagnosing and testing. • If you try to remove it, you’ll damage the unit. • The vendor will return the unit if it has been damaged during attempted CD removal. Fill in the customer information on the Audio System Diagnosis and Core Return form. The vendor will remove the CD and mail it back to the custome

2001 HONDA GL1800/ A Radio Muting Improvement

0

Filed Under (Honda) by admin on 29-01-2011

download
1. Place the faulty radio in the same box in which the exchange radio was sent. THE FAULTY RADIO (CORE) MUST BE RETURNED IN THE SAME BOX IN WHICH THE EXCHANGE RADIO WAS SHIPPED. These boxes are identified by the label shown below which is printed on the inside of the lid. 2. Fill out the pre-printed FedEx airbill that came in the box with the exchange radio. The airbill should have the following address preprinted on it: AHM Remanufactured Parts c/o NK Parts Industries Inc./West 2640 Campbell Rd. Sidney, OH 45365-8836 • Do not use an ordinary FedEx airbill. The pre- addressed airbill has a special account number on it for the exchange program. If you need more airbills, call the Radio Order Desk toll free, not your assigned Parts Center . • Write your dealer number and the warranty claim number in the area shown in the sample airbill ffix the FedEx Airbill to the outside of the box. Radios sent in a box not bearing the correct FedEx airbill will not be accepted for reimbursement under this program. 4. Enclose a copy of the HONDANET for Windows warranty claim in the box. If the claim form is incomplete or not in the box, the faulty radio will be returned to your dealership. 5. Ship the faulty radio to the preprinted address on the airbill. NOTE: Do not ship the faulty radio to the manufacturer or the Warranty Parts Inspection (WPI) Center. 6. For your records, on the repair order include the following: • warranty claim number • original part number • FedEx airbill number When the faulty radio is received, a core credit will be posted to your dealership’s Balance Forward Account. The credit can be identified by the claim number + “CORE” (e.g., 12345/CORE). REMEMBER: A copy of the HONDANET for Windows warranty claim must be included in the box. RETURNING THE FAULTY RADIO The faulty radio must be returned within 20 days of

Incoming search terms:

Incoming search terms: