HARLEY DAVIDSON TOURING CHROME PASSENGER FOOTBOARD PAN KIT INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 13-04-2011

download
Installation 1. See Service Parts illustration. Remove socket head cap- screw (2) from footboard support (3). Place support on a clean flat surface. 2. From bottom of footboard (1), use a small flat blade screwdriver to push rubber beads on pad (5) up through holes in footboard. Remove pad from footboard. 3. Using a brass drift and rubber mallet, tap two retaining pins (4) toward center of footboard and remove. 4. Remove footboard from support bracket taking care to remove and retain detent ball (6) and spring (7) from footboard support (3). 5. Insert spring (7) and detent spring (6) into footboard support (3). 6. Place new chrome footboard pan in position with footboard support and insert retaining pins using a brass drift and rubber mallet. 7. Moisten rubber beads on pad with soapy water. Place pad into position on footboard. From bottom of footboard, use needle nose pliers to pull rubber beads down through holes in footboard. 8. Engage nubs on inboard corners of pad with holes in foot- board. 9. Install socket head cap screw into footboard support and tighten 120 in-lbs (13.6 Nm). 10. Repeat procedure for other passenger footboard