DST-1200 WHEEL BALANCER INSTALLATION AND OPERATION MANUAL

0

Filed Under (Tips and Review) by admin on 27-11-2010

download
1. Remove the carton from the pallet. 2. Remove the shipping bolts making sure to keep hands clear of all pinch points. 3. Remove straps and plastic wrap holding the hood and tower in shipping position. z Do not use the control tower, face-plate, hood or threaded shaft to lift the balancer. z Use help to remove the balancer from the pallet. The unit is heavy and the weight is not evenly distributed. z Dropping the unit from the pallet may cause personal injury or equipment damage. Electrical Requirements YOUR MACHINE HAS A DUAL VOLTAGE MOTOR and can be run on either 110 or 220 volts. STANDARD WIRING IS 110 VOLTS. Your balancer features a dual voltage, (110/220volt) dual phase (50 or 60 HZ.) power system. Simply position the switch located at the back of the machine to the desired voltage setting then install a required plug if necessary