Kawasaki, Suzuki and Yamaha GRIPS INSTALLATION

0

Filed Under (Tips and Review) by admin on 25-10-2010

download
1 (Fig. 1) 3 Apply glue to the throttle sleeve. Most of the glue should be applied to the end of the sleeve away from the throttle housing. 4 Slide the grip onto throttle sleeve with one strong push (Fig. 2). NOTE: Be sure not to get any glue into the space between the throttle sleeve and the throttle sleeve housing, as well as the space between the throttle sleeve and the handle bar. Wipe up any excess glue immediately. Allow 6 hours for glue to set before using . GRIPS Remove clutch side grip by carefully cutting it away from the handlebar with a sharp knife. 1 Apply glue to the bar. Most of the glue should be applied to the end of the bar away from the switch housing. 2 Slide the grip onto the bar with one strong push. Wipe away any excess glue immediately. Allow 6 hours for glue to set before using. (Fig. 3)

Write a comment