Yamaha XVS 650 SPECIFICATIONS AND OWNER'S MANUAL

0

Filed Under (Yamaha) by admin on 07-11-2010

download
Brake lever The brake lever is located at the right handlebar grip. To apply the front brake, pull the lever toward the handlebar grip. 1. Brake lever INSTRUMENT AND CONTROL FUNCTIONS 3 NOTE: The fuel tank cap cannot be installed unless the key is in the lock. In addition, the key cannot be removed if the cap is not properly installed and locked. WARNING Make sure that the fuel tank cap is properly installed before riding. knocking (or pinging) occurs, use a gasoline of a different brand or premium unleaded fuel. Use of unleaded fuel will extend spark plug life and reduce maintenance costs. Gasohol There are two types of gasohol: gasohol containing ethanol and that containing methanol. Gasohol containing ethanol can be used if the ethanol content does not exceed 10%. Gasohol containing methanol is not recommended by Yamaha because it can cause damage to the fuel system or vehicle performance problems. INSTRUMENT AND CONTROL FUNCTIONS 3 ON With the fuel cock lever in this position, fuel flows to the carburetors. Turn the fuel cock lever to this position when starting the engine and riding. RES 1. Arrow mark positioned over “ON” 1. Arrow mark positioned over “RES” Seats (XVS650) Passenger seat To remove the passenger seat Remove the nut, and then pull the passenger seat up. To install the passenger seat Insert the projection on the front of the passenger seat into the seat holder as shown, place the seat in the original position, and then install the nut. 1. Nut INSTRUMENT AND CONTROL FUNCTIONS 3 Seats (XVS650A/AT) Passenger seat To remove the passenger seat Remove the bolt, and then pull the passenger seat up. To install the passenger seat Insert the projections on the front of the passenger seat into the holders as shown, place the seat in the original position, and then install the bolt. 1. Bolt Helmet holder To open the helmet holder, insert the key into the lock, and then turn the key as shown. To lock the helmet holder, place it in the original position, and then remove the key

Write a comment