YAMAHA YZF-R1P/ YZF-R1PC SERVICE MANUAL

0

Filed Under (Yamaha) by admin on 25-11-2010

download
1Fuel pump 2Pressure regulator 3Fuel injector 4Throttle body 5Intake temperature sensor 6Throttle position sensor 7Intake air pressure sensor 8ECU 9Atmospheric pressure sensor 0Coolant temperature sensor ACylinder identification sensor BCrankshaft position sensor ÈFuel system ÉAir system ÊControl system Illustration is for reference only. 1 – 4 GEN INFO FEATURES Fuel control block The fuel control block consists of the following main components: An engine trouble warning light is provided on meter panel. Component Function Control block ECU Total FI system control Throttle body Air volume control Pressure regulator Fuel pressure detection Sensor block Intake air pressure sensor Intake air pressure detection Atmospheric pressure sensor Atmospheric pressure detection Coolant temperature sensor Coolant temperature detection Intake temperature sensor Intake temperature detection Throttle position sensor Throttle angle detection Cylinder identification sensor Reference position detection Crankshaft position sensor Crankshaft position detection and engine RPM detection Speed sensor Speed detection Actuator block Injector Fuel injection Fuel pump Fuel feed Air Induction system, air cut valve Induction of secondary air A. Power supply circuit The power supply circuit obtains power from the battery (12 V) to supply the power (5 V) that is required for operating the ECU. B. Input interface circuits The input interface circuits convert the signals output by all the sensors into digital signals, which can be processed by the CPU, and input them into the CPU. C. CPU (Central Processing Unit) The CPU determines the condition of the sensors in accordance with the level of the signal that is output by the respective sensor. Then, the signals are temporarily stored on the RAM in the CPU. Based on those stored signals and the basic processing program on the ROM, the CPU calculates the fuel injection duration, injection timing, and ignition timing, and then sends control commands to the respective output interface circuits. D. Output interface circuits The output interface circuits convert the control signals output by the CPU into actuating signals for the respective actuators in order to actuate them. They also output commands to the indicator and relay output circuits as needed.

Comments are closed.